（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| CISPR 16-1-6:2014 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration | ||||
| IEC 62231-1:2015 | Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV - Part 1: Dimensional, mechanical and electrical characteristics | ||||
| IEC 61252:1993 | Electroacoustics - Specifications for personal sound exposure meters | ||||
| IEC 62271-102:2001/COR1:2002 | Corrigendum 1 - High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches | ||||
| IEC 60947-6-2:2002+AMD1:2007 CSV | Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) | ||||
| IEC 60445:1973/COR1:1974 | Corrigendum 1 - Identification of apparatus terminals and general rules for a uniform system of terminal marking, using an alphanumeric notation | ||||
| IEC 61643-312:2013/COR1:2013 | Corrigendum 1 - Components for low-voltage surge protective devices - Part 312: Selection and application principles for gas discharge tubes | ||||
| IEC 60999-2:2003 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) | ||||
| IEC 60958-1:2008+AMD1:2014 CSV | Digital audio interface - Part 1: General | ||||
| IEC 60950-1:2005+AMD1:2009 CSV | Information technology equipment - Safety - Part 1: General requirements | ||||
| IEC 60958-3:2006 | Digital audio interface - Part 3: Consumer applications | ||||
| IEC 60958-3:2006+AMD1:2009 CSV | Digital audio interface - Part 3: Consumer applications | ||||
| IEC 60061-3:1969/AMD21:1999 | Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges | ||||
| IEC 60061-3:1969/AMD28:2002 | Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges | ||||
| IEC 60061-3:1969/AMD31:2003 | Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : Gauges | ||||
| IEC 60061-3:1969/AMD30:2003 | Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | ||||
| IEC 60061-3:1969/AMD34:2004 | Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | ||||
| IEC 60061-3:1969/AMD35:2005 | Amendment 35 to IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | ||||
| IEC 60061-3:1969/AMD37:2006 | Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | ||||
| IEC 60061-3:1969/AMD36:2006 | Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | ||||
| IEC 61003-2:2009 | Industrial-process control systems - Instruments with analogue inputs and two or multi-state outputs - Part 2: Guidance for inspection and routine testing | ||||
| IEC 62388:2013/COR1:2014 | Corrigendum 1 - Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results | ||||
| IEC 61003-1:2004 | Industrial-process control systems - Instruments with analogue inputs and two-or multi-state outputs - Part 1: Methods of evaluating performance | ||||
| IEC 61010-2-081:2015 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes | ||||
| IEC 60061-3:1969/AMD42:2010 | Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | ||||
| IEC 60061-3:1969/AMD44:2011 | Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | ||||
| IEC 61057:1991 | Aerial devices with insulating boom used for live working | ||||
| IEC 60061-3:1969 | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | ||||
| IEC 61156-7-1:2003/COR1:2003 | Corrigendum 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 7-1: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Blank detail specification for digital and analog communication cables | ||||
| IEC 60061-3:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | ||||
| IEC 60357:1982/AMD5:1992 | Amendment 5 - Tungsten halogen lamps (non-vehicle) | ||||
| IEC 61140:2001 | Protection against electric shock - Common aspects for installation and equipment | ||||
| IEC 60838-2-2:2006 | Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules | ||||
| IEC 61156-6:2010/AMD1:2012 | Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Sectional specification | ||||
| IEC 60061-4:1990/AMD6:2000 | Amendment 6 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information | ||||
| IEC 60092-303:1980/AMD1:1997 | Amendment 1 - Electrical installations in ships. Part 303: Equipment - Transformers for power and lighting | ||||
| IEC 60061-4:1990/AMD11:2007 | Amendment 11 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information | ||||
| IEC 61156-7:2003/AMD1:2012 | Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Sectional specification for digital and analog communication cables | ||||
| IEC 61156-7:2003 | Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Sectional specification for digital and analog communication cables | ||||
| ISO/IEC 80079-38:2016 | Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines | ||||
| IEC 60061-4:1990/AMD7:2001 | Amendment 7 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information | ||||
| IEC 60061-4:1990/AMD8:2003 | Amendment 8 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information | ||||
| IEC 60061-4:1990 | Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information | ||||
| IEC 60092-376:2003 | Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) | ||||
| IEC 61162-3:2008+AMD1:2010+AMD2:2014 CSV | Maritime navigation and radiocommunication equipment and systems -Digital interfaces - Part 3: Serial data instrument network | ||||
| IEC 60061-4:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information | ||||
| IEC TS 61200-53:1994 | Electrical installation guide - Part 53: Selection and erection of electrical equipment - Switchgear and controlgear | ||||
| IEC 61223-3-5:2004/COR1:2006 | Corrigendum 1 - Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment | ||||
| IEC 60317-43:1997/AMD1:2010 | Amendment 1 - Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240 | ||||
| IEC 60050-841:1983 | International Electrotechnical Vocabulary. Industrial electroheating |
若您对上表中数据有任何疑问，请与网站联系。
