（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 29541:2010 | Solid mineral fuels -- Determination of total carbon, hydrogen and nitrogen content -- Instrumental method | ||||
| ISO 9062:1992 | Acid-grade and ceramic-grade fluorspar -- Determination of manganese content -- Periodate spectrometric method | ||||
| ISO 6568:1981 | Natural gas -- Simple analysis by gas chromatography | ||||
| ISO 14532:2014 | Natural gas -- Vocabulary | ||||
| ISO 2977:1989/Cor 1:1992 | |||||
| ISO 3007:1986 | Petroleum products -- Determination of vapour pressure -- Reid method | ||||
| ISO 3016:1974 | Petroleum oils -- Determination of pour point | ||||
| ISO/DIS 15029-2 | Petroleum and related products -- Determination of spray ignition characteristics of fire-resistant fluids -- Part 2: Spray test -- Stabilized flame heat release method | ||||
| ISO 9047:1989 | Building construction -- Sealants -- Determination of adhesion/cohesion properties at variable temperatures | ||||
| ISO 10590:2005 | Building construction -- Sealants --- Determination of tensile properties of sealants at maintained extension after immersion in water | ||||
| ISO 10591:1991 | Building construction -- Sealants -- Determination of adhesion/cohesion properties after immersion in water | ||||
| ISO 10591:2005 | Building construction -- Sealants -- Determination of adhesion/cohesion properties of sealants after immersion in water | ||||
| ISO/R 683-4:1970 | Heat-treated steels, alloy steels and free-cutting steels -- Part 4: Wrought quenched and tempered steels with 1 % chromium and 0,2 % molybdenum and controlled sulphur content | ||||
| ISO 3134-5:1981 | Light metals and their alloys -- Terms and definitions -- Part 5: Methods of processing and treatment | ||||
| ISO 7373:1987 | Ferroalloys -- Experimental methods for checking the precision of sample division | ||||
| ISO 1559:1978 | Alloy for dental amalgam | ||||
| ISO/FDIS 4492 | Metallic powders, excluding powders for hardmetals -- Determination of dimensional changes associated with compacting and sintering | ||||
| ISO 3179:1974 | Coniferous sawn timber -- Nominal dimensions | ||||
| ISO 4469:1981 | Wood -- Determination of radial and tangential shrinkage | ||||
| ISO 4860:1982 | Wood -- Determination of volumetric swelling | ||||
| ISO 8905:1988 | Sawn timber -- Test methods -- Determination of ultimate strength in shearing parallel to grain | ||||
| ISO 13059:2011 | Round timber -- Requirements for the measurement of dimensions and methods for the determination of volume | ||||
| ISO/DIS 13912 | Structural timber -- Machine strength grading -- Basic principles | ||||
| ISO 2190:1998 | Granulated cork -- Determination of moisture content | ||||
| ISO 3813:2004 | Resilient floor coverings -- Cork floor tiles -- Specification | ||||
| ISO 1927:1984 | Prepared unshaped refractory materials (dense and insulating) -- Classification | ||||
| ISO 9182-4:1992 | Tools for pressing -- Guide pillars -- Part 4: Type C, pillars with taper lead and bush | ||||
| ISO 10081-3:2003 | Classification of dense shaped refractory products -- Part 3: Basic products containing from 7 % to 50 % residual carbon | ||||
| ISO 12677:2003 | Chemical analysis of refractory products by XRF -- Fused cast bead method | ||||
| ISO 13765-4:2004 | Refractory mortars -- Part 4: Determination of flexural bonding strength | ||||
| ISO 16835:2014 | Refractory products -- Determination of thermal expansion | ||||
| ISO 14719:2011 | Chemical analysis of refractory material glass and glazes -- Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline | ||||
| ISO 3002-4:1984 | Basic quantities in cutting and grinding -- Part 4: Forces, energy, power | ||||
| ISO 18886:2016 | Refractory test-piece preparation -- Gunning refractory panels by wet gunning techniques | ||||
| ISO 20182:2005 | Refractory test piece preparation -- Gunning refractory panels by the pneumatic-nozzle mixing type guns | ||||
| ISO 21068-2:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products -- Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon | ||||
| ISO 7010:2011/CD Amd 233 | Safety sign W077: Severing of leg by saw blade | ||||
| ISO 21587-2:2007 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) -- Part 2: Wet chemical analysis | ||||
| ISO 123:1974 | Rubber latex -- Sampling | ||||
| ISO 124:1997 | Latex, rubber -- Determination of total solids content | ||||
| ISO 124:1997/Amd 1:2006 | Precision data | ||||
| ISO 127:1995 | Rubber, natural latex concentrate -- Determination of KOH number | ||||
| ISO 248-1:2011 | Rubber, raw -- Determination of volatile-matter content -- Part 1: Hot-mill method and oven method | ||||
| ISO 498:1992 | Natural rubber latex concentrate -- Preparation of dry films | ||||
| ISO 706:1985 | Rubber latex -- Determination of coagulum content (sieve residue) | ||||
| ISO 1802:1992 | Natural rubber latex concentrate -- Determination of boric acid content | ||||
| ISO 12243:2003 | Medical gloves made from natural rubber latex -- Determination of water-extractable protein using the modified Lowry method | ||||
| ISO 17052:2007 | Rubber, raw -- Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography -- Thermal desorption (dynamic headspace) method | ||||
| ISO 3219:1977 | Plastics -- Polymers in the liquid, emulsified or dispersed state -- Determination of viscosity with a rotational viscometer working at defined shear rate | ||||
| ISO 4665-2:1985 | Rubber, vulcanized -- Resistance to weathering -- Part 2: Methods of exposure to natural weathering |
若您对上表中数据有任何疑问，请与网站联系。
