（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/CD 5167-6 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 6: Wedge meters | ||||
| ISO 12629:2011 | Thermal insulating products for building equipment and industrial installations -- Determination of water vapour transmission properties of preformed pipe insulation | ||||
| ISO/NP 29767 | Thermal insulating products for building applications -- Determination of short-term water absorption by partial immersion | ||||
| ISO 29804:2009 | Thermal insulation products for building applications -- Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material | ||||
| ISO 1070:1973 | Liquid flow measurement in open channels -- Slope-area method | ||||
| ISO 1070:1992/Amd 1:1997 | |||||
| ISO 3454:1983 | Liquid flow measurement in open channels -- Direct depth sounding and suspension equipment | ||||
| ISO 3455:1976 | Liquid flow measurement in open channels -- Calibration of rotating-element current-meters in straight open tanks | ||||
| ISO 4360:2008 | Hydrometry -- Open channel flow measurement using triangular profile weirs | ||||
| ISO 4373:1995 | Measurement of liquid flow in open channels -- Water-level measuring devices | ||||
| ISO 9334:1995 | Optics and optical instruments -- Optical transfer function -- Definitions and mathematical relationships | ||||
| ISO 11664-5:2009 | Colorimetry -- Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram | ||||
| ISO 6247:1998/Cor 1:1999 | |||||
| ISO/CIE 11664-6:2014 | Colorimetry -- Part 6: CIEDE2000 Colour-difference formula | ||||
| ISO 15469:2004 | Spatial distribution of daylight -- CIE standard general sky | ||||
| ISO 6141:1984 | Gas analysis -- Calibration gas mixtures -- Certificate of mixture preparation | ||||
| ISO 261:1973 | ISO general purpose metric screw threads -- General plan | ||||
| ISO 2702:2011 | Heat-treated steel tapping screws -- Mechanical properties | ||||
| ISO 7043:1983 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) | ||||
| ISO/DIS 7043 | Prevailing torque hexagon high nuts with flange (with non-metallic insert) -- Product grades A and B | ||||
| ISO 7044:1997 | Prevailing torque type all-metal hexagon nuts with flange -- Product grades A and B | ||||
| ISO/DIS 7044 | Prevailing torque (all-metal) hexagon high nuts with flange -- Product grades A and B | ||||
| ISO 1051:1999 | Rivet shank diameters | ||||
| ISO 2341:1986 | Clevis pins with head | ||||
| ISO 8745:1986 | Grooved pins -- Half-length taper grooved | ||||
| ISO 8748:2007 | Spring-type straight pins -- Coiled, heavy duty | ||||
| ISO 3193:1991/Cor 1:1992 | |||||
| ISO 3225:1985 | Aerospace -- Self-locking, fixed, two lug anchor nuts, reduced series, with counterbore, strength classification 1 100 MPa and maximum operating temperature 235 degrees C | ||||
| ISO 7481:1984 | Aerospace -- Fasteners -- Self-locking nuts with maximum operating temperature less than or equal to 425 degrees C -- Test methods | ||||
| ISO 7481:2000 | Aerospace -- Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C -- Test methods | ||||
| ISO/IEC ISP 10611-4:1994/Cor 1:1996 | |||||
| ISO 8642:1986 | Aerospace -- Self-locking nuts with maximum operating temperature greater than 425 degrees C -- Test methods | ||||
| ISO 13596:2000 | Aerospace -- Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated -- Dimensions | ||||
| ISO 6282:1983 | Plain bearings -- Metallic thin-walled half bearings -- Determination of the sigma 0,01*-limit | ||||
| ISO 6281:2007 | Plain bearings -- Testing under conditions of hydrodynamic and mixed lubrication in test rigs | ||||
| ISO 7148-1:1985 | Plain bearings -- Testing of the tribological behaviour of bearing materials -- Part 1: Testing of the friction and wear behaviour of bearing material/mating material/oil combinations under conditions of boundary lubrication | ||||
| ISO 6526:1983 | Plain bearings -- Pressed bimetallic half thrust washers -- Features and tolerances | ||||
| ISO 1132-2:2001 | Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods | ||||
| ISO 6278:1980 | Needle roller bearings -- Track rollers -- Boundary dimensions | ||||
| ISO/CD 7005-2 | Metallic flanges -- Part 2: Cast iron flanges | ||||
| ISO/NP 7005-3 | Metallic flanges -- Part 3: Copper alloy and composite flanges | ||||
| ISO 8639:2000 | Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods for leaktightness of flexible joints | ||||
| ISO 26623-1:2014 | Polygonal taper interface with flange contact surface -- Part 1: Dimensions and designation of shanks | ||||
| ISO 26623-2:2008 | Polygonal taper interface with flange contact surface -- Part 2: Dimensions and designation of receivers | ||||
| ISO 5170:1977 | Machine tools -- Lubrication systems | ||||
| ISO 23848-1:2009 | Machine tools -- Ball splines -- Part 1: General characteristics and requirements | ||||
| ISO 10303-44:1994/Cor 1:1999 | |||||
| ISO/TS 10303-1062:2010 | Industrial automation systems and integration -- Product data representation and exchange -- Part 1062: Application module: Contract | ||||
| ISO 2284:1987 | Hand taps for parallel and taper pipe threads -- General dimensions and marking | ||||
| ISO/TS 10303-1271:2011 | Industrial automation systems and integration -- Product data representation and exchange -- Part 1271: Application module: State characterized |
若您对上表中数据有任何疑问，请与网站联系。
