（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/TS 17892-4:2004/Cor 1:2006 | |||||
| ISO 813:1986 | Rubber, vulcanized -- Determination of adhesion to metal -- One-plate method | ||||
| ISO/FDIS 814 | Rubber, vulcanized or thermoplastic -- Determination of adhesion to metal -- Two-plate method | ||||
| ISO 1460:1973 | Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Determination of the mass per unit area -- Gravimetric method | ||||
| ISO 815:1972 | Vulcanized rubbers -- Determination of compression set under constant deflection at normal and high temperatures | ||||
| ISO 1658:1973 | Natural rubber (NR) -- Test recipes and evaluation of vulcanization characteristics | ||||
| ISO 1827:1976 | Rubber, vulcanized -- Determination of modulus in shear -- Quadruple shear method | ||||
| ISO/DIS 22477-1 | Geotechnical investigation and testing -- Testing of geotechnical structures -- Part 1: Pile load test by static axially loaded compression | ||||
| ISO 3865:2005 | Rubber, vulcanized or thermoplastic -- Methods of test for staining in contact with organic material | ||||
| ISO 4097:1988 | Rubber, ethylene-propylene-diene (EPDM) -- Non-oil-extended general purpose types -- Evaluation procedure | ||||
| ISO 4658:1999 | Acrylonitrile-butadiene rubber (NBR) -- Evaluation procedure | ||||
| ISO 18517:2005 | Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide | ||||
| ISO 844:2007 | Rigid cellular plastics -- Determination of compression properties | ||||
| ISO 1209-2:2007 | Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity | ||||
| ISO 1922:2012 | Rigid cellular plastics -- Determination of shear strength | ||||
| ISO 2082 | Metallic and other inorganic coatings -- Electroplated coatings of cadmium with supplementary treatments on iron or steel | ||||
| ISO 2581:1975 | Rigid cellular plastics -- Determination of apparent thermal conductivity by means of a heat-flow meter | ||||
| ISO 4898:1984/Add 2:1988 | Labelling and marking of products | ||||
| ISO 5296:1978/Add 2:1982 | |||||
| ISO 5296:1978/Add 1:1982 | |||||
| ISO 7590:1988 | Steel cord conveyor belts -- Cover thickness measurement | ||||
| ISO 778:2001 | Paper, board and pulp -- Determination of copper | ||||
| ISO 287:1985 | Paper and board -- Determination of moisture content -- Oven-drying method | ||||
| ISO 3036:1975 | Board -- Determination of puncture resistance | ||||
| ISO/DIS 22477-4 | Geotechnical investigation and testing -- Testing of geotechnical structures -- Part 4: Testing of piles dynamic load testing | ||||
| ISO 11093-8:2012 | Paper and board -- Testing of cores -- Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis | ||||
| ISO/CD 8504-3 | Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 3: Hand- and power-tool cleaning | ||||
| ISO/DIS 22477-5 | Geotechnical investigation and testing -- Testing of geotechnical structures -- Part 5: Testing of grouted anchors | ||||
| ISO 13105-2:2014/DAmd 1 | |||||
| ISO 11990:1999 | Optics and optical instruments -- Lasers and laser-related equipment -- Determination of laser resistance of tracheal tube shafts | ||||
| ISO/CD 19916-1 | Glass in building -- Vacuum glass -- Part 1: Basic specification of products and evaluation methods for thermal and sound insulation performance | ||||
| ISO 15874-3:2013/DAmd 1 | |||||
| ISO/DIS 19427 | Steel wire ropes -- Pre-fabricated parallel wire strands for suspension bridge main cable -- Specifications | ||||
| ISO/CD 17201-1 | Acoustics -- Noise from shooting ranges -- Part 1: Determination of muzzle blast by measurement | ||||
| ISO 1942:1983/Add 1:1983/Add 6:1985 | |||||
| ISO 4006:1977 | Measurement of fluid flow in closed conduits -- Vocabulary and symbols | ||||
| ISO 4006:1991 | Measurement of fluid flow in closed conduits -- Vocabulary and symbols | ||||
| ISO 10360-1:2000 | Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 1: Vocabulary | ||||
| ISO 19649:2017 | Mobile robots -- Vocabulary | ||||
| ISO/DIS 9211-6 | Optics and photonics -- Minimum requirements for optical coatings -- Part 6: Reflecting coatings | ||||
| ISO 12780-1:2011 | Geometrical product specifications (GPS) -- Straightness -- Part 1: Vocabulary and parameters of straightness | ||||
| ISO/TS 12781-2:2003 | Geometrical Product Specifications (GPS) -- Flatness -- Part 2: Specification operators | ||||
| ISO 7046:1983 | Cross recessed countersunk flat head screws (common head style) -- Product grade A and property class 4.8 only | ||||
| ISO 7094:2000 | Plain washers -- Extra large series -- Product grade C | ||||
| ISO 4036:1979 | Hexagon thin nuts -- Product grade B (unchamfered) | ||||
| ISO 8571-1:1988/Cor 1:1991 | |||||
| ISO/CD 6480 | Conditions of acceptance for horizontal internal broaching machines -- Testing of the accuracy | ||||
| ISO/CD 6481 | Acceptance conditions for vertical surface type broaching machines -- Testing of accuracy | ||||
| ISO 6682:1980 | Earth-moving machinery -- Zones of comfort and reach for controls | ||||
| ISO 18405:2017 | Underwater acoustics -- Terminology |
若您对上表中数据有任何疑问，请与网站联系。
