（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 3474:1976 | Unplasticized polyvinyl chloride (PVC) pipes -- Specification and measurement of opacity | ||||
| ISO 1122-1:1998/Cor 1:1999 | |||||
| ISO 3477:1981 | Polypropylene (PP) pipes and fittings -- Density -- Determination and specification | ||||
| ISO 3127:1994 | Thermoplastics pipes -- Determination of resistance to external blows -- Round-the-clock method | ||||
| ISO 3608:1976 | Chlorinated polyvinyl chloride (CPVC) pipes -- Tolerances on outside diameters and wall thicknesses | ||||
| ISO/AWI 21254-2 | Lasers and laser-related equipment -- Test methods for laser-induced damage threshold -- Part 2: Threshold determination | ||||
| ISO 3609:1977 | Polypropylene (PP) pipes -- Tolerances on outside diameters and wall thicknesses | ||||
| ISO 4056:1978 | Polyethylene (PE) pipes and fittings -- Designation of polyethylene, based on nominal density and melt flow index | ||||
| ISO 6259-1:2015 | Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method | ||||
| ISO 6259-2:1997 | Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) | ||||
| ISO 6259-3:2015 | Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes | ||||
| ISO 6964:1986 | Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method and basic specification | ||||
| ISO 7245:1984 | Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials | ||||
| ISO 7246:1984 | Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials | ||||
| ISO/DIS 7432 | Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals | ||||
| ISO 8278:2016 | Aerospace series -- Hydraulic, pressure compensated, variable delivery pumps -- General requirements | ||||
| ISO 8575:2016 | Aerospace -- Fluid systems -- Hydraulic system tubing | ||||
| ISO 8625-1:1993 | Aerospace -- Fluid systems -- Vocabulary -- Part 1: General terms and definitions related to pressure | ||||
| ISO 8116-3:2008 | Textile machinery and accessories -- Beams for winding -- Part 3: Weaver's beams | ||||
| ISO 8116-4:2008 | Textile machinery and accessories -- Beams for winding -- Part 4: Test methods and quality classification of flanges for weaver's beams, warper's beams and sectional beams | ||||
| ISO 8829-1:2009 | Aerospace -- Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies -- Part 1: Metallic (stainless steel) braid | ||||
| ISO 8913:1989 | Aerospace -- Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa -- Procurement specification | ||||
| ISO 8913:1994 | Aerospace -- Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa -- Procurement specification | ||||
| ISO 12821:2013 | Glass packaging -- 26 H 180 crown finish -- Dimensions | ||||
| ISO 1361:1997 | Light-gauge metal containers -- Round open-top cans -- Internal diameters | ||||
| ISO 7432:2002 | Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals | ||||
| ISO 7509:2000 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure | ||||
| ISO 7509:2015 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure | ||||
| ISO/PRF 7510 | Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents | ||||
| ISO/NP 7685 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness | ||||
| ISO 7686:2005 | Plastics pipes and fittings -- Determination of opacity | ||||
| ISO 8788:1987 | Aerospace -- Fasteners -- Tolerances of form and position for nuts | ||||
| ISO 8361-1:1991 | Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method | ||||
| ISO 7686:1992 | Plastics pipes and fittings -- Opacity -- Test method | ||||
| ISO 8361-3:1991 | Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings | ||||
| ISO 8361-2:1991 | Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings | ||||
| ISO 8513:2000 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of longitudinal tensile properties | ||||
| ISO/CD 8483 | Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of bolted flange joints | ||||
| ISO 8513:2016 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the initial longitudinal tensile strength | ||||
| ISO/TR 8584-2:1993 | Thermoplastics pipes for industrial applications under pressure -- Determination of the chemical resistance factor and of the basic stress -- Part 2: Pipes made of halogenated polymers | ||||
| ISO/NP 8521 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial circumferential tensile strength | ||||
| ISO 9206:1990 | Aerospace -- Constant displacement hydraulic motors -- General specifications | ||||
| ISO 8779:2010 | Plastics piping systems -- Polyethylene (PE) pipes for irrigation -- Specifications | ||||
| ISO 16906:2015 | Resilient floor coverings -- Determination of seam strength | ||||
| ISO 8796:2004 | Polyethylene PE 32 and PE 40 pipes for irrigation laterals -- Susceptibility to environmental stress cracking induced by insert-type fittings -- Test method and requirements | ||||
| ISO/TR 9080:1992 | Thermoplastics pipes for the transport of fluids -- Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials | ||||
| ISO 9852:1995 | Unplasticized poly(vinyl chloride) (PVC-U) pipes -- Dichloromethane resistance at specified temperature (DCMT) -- Test method | ||||
| ISO 6966:1993 | Aircraft -- Basic requirements for aircraft loading equipment | ||||
| ISO/PAS 17984:2001 | Machine-made textile floor coverings -- Determination of dimensional changes after exposure to heat and/or water | ||||
| ISO 17504:1999 | Textile floor coverings -- Determination of wool fibre integrity using an abrasion machine |
若您对上表中数据有任何疑问，请与网站联系。
