（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 12189:2008 | Implants for surgery -- Mechanical testing of implantable spinal devices -- Fatigue test method for spinal implant assemblies using an anterior support | ||||
| ISO 13958:2014 | Concentrates for haemodialysis and related therapies | ||||
| ISO 13960:2003 | Cardiovascular implants and artificial organs -- Plasmafilters | ||||
| ISO 12236:1996 | Geotextiles and geotextile-related products -- Static puncture test (CBR test) | ||||
| ISO 14117:2012 | Active implantable medical devices -- Electromagnetic compatibility -- EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices | ||||
| ISO 14243-3:2014 | Implants for surgery -- Wear of total knee-joint prostheses -- Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test | ||||
| ISO 14708-2:2005 | Implants for surgery -- Active implantable medical devices -- Part 2: Cardiac pacemakers | ||||
| ISO 14708-1:2014 | Implants for surgery -- Active implantable medical devices -- Part 1: General requirements for safety, marking and for information to be provided by the manufacturer | ||||
| ISO 12956:1999 | Geotextiles and geotextile-related products -- Determination of the characteristic opening size | ||||
| ISO 15676:2005 | Cardiovascular implants and artificial organs -- Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO) | ||||
| ISO 15676:2016 | Cardiovascular implants and artificial organs -- Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO) | ||||
| ISO 223:1975 | Withdrawal of ISO 223-1975 | ||||
| ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants -- General requirements | ||||
| ISO 12958:1999 | Geotextiles and geotextile-related products -- Determination of water flow capacity in their plane | ||||
| ISO 16429:2004 | Implants for surgery -- Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods | ||||
| ISO/ASTM 51631:2013 | Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimetery system calibrations | ||||
| ISO/TS 17137:2014 | Cardiovascular implants and extracorporeal systems -- Cardiovascular absorbable implants | ||||
| ISO/ASTM 51650:2013 | Practice for use of a cellulose triacetate dosimetry system | ||||
| ISO 16428:2005 | Implants for surgery -- Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices | ||||
| ISO 17853:2003 | Wear of implant materials -- Polymer and metal wear particles -- Isolation, characterization and quantification | ||||
| ISO 18192-2:2010 | Implants for surgery -- Wear of total intervertebral spinal disc prostheses -- Part 2: Nucleus replacements | ||||
| ISO 9463:2009 | Nuclear energy -- Nuclear fuel technology -- Determination of plutonium in nitric acid solutions by spectrophotometry | ||||
| ISO 19233-1:2017 | Implants for surgery -- Orthopaedic joint prosthesis -- Part 1: Procedure for producing parametric 3D bone models from CT data of the knee | ||||
| ISO 22675:2006 | Prosthetics -- Testing of ankle-foot devices and foot units -- Requirements and test methods | ||||
| ISO 26722:2014 | Water treatment equipment for haemodialysis applications and related therapies | ||||
| ISO/TR 37137:2014 | Cardiovascular biological evaluation of medical devices -- Guidance for absorbable implants | ||||
| IEC/TR 62653:2013 | Guidelines for the safe use of medical products in dialysis treatment | ||||
| ISO 7227:1987 | Road vehicles -- Lighting and light signalling devices -- Vocabulary | ||||
| ISO 6931-1:2016 | Stainless steels for springs -- Part 1: Wire | ||||
| ISO 2490:1975 | Single-start solid (monobloc) gear hobs with axial keyway, 1 to 20 module and 1 to 20 diametral pitch -- Nominal dimensions | ||||
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials | ||||
| ISO/TR 10064-1 | Code of inspection practice -- Part 1: Measurement of cylindrical gear tooth flanks | ||||
| ISO 3:1973 | Preferred numbers -- Series of preferred numbers | ||||
| ISO Guide 80:2014 | Guidance for the in-house preparation of quality control materials (QCMs) | ||||
| ISO 97:1975 | Textile machinery and accessories -- Rings for spinning, doubling and twisting for ear-shaped travellers | ||||
| ISO 10300-3:2014 | Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root strength | ||||
| ISO/TR 16476:2016 | Reference materials -- Establishing and expressing metrological traceability of quantity values assigned to reference materials | ||||
| ISO/TR 15144-1:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles | ||||
| ISO 341:1976 | Textile machinery and accessories -- Cotton spinning machinery -- Working width | ||||
| ISO 2137:2007 | Petroleum products and lubricants -- Determination of cone penetration of lubricating greases and petrolatum | ||||
| ISO 8068:2006 | Lubricants, industrial oils and related products (class L) -- Family T (Turbines) -- Specification for lubricating oils for turbines | ||||
| ISO/TS 11366:2011 | Petroleum and related products -- Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines | ||||
| ISO 12924:2010 | Lubricants, industrial oils and related products (Class L) -- Family X (Greases) -- Specification | ||||
| ISO 13357-1:2017 | Petroleum products -- Determination of the filterability of lubricating oils -- Part 1: Procedure for oils in the presence of water | ||||
| ISO 3105:1994 | Glass capillary kinematic viscometers -- Specifications and operating instructions | ||||
| ISO 13357-1:2002 | Petroleum products -- Determination of the filterability of lubricating oils -- Part 1: Procedure for oils in the presence of water | ||||
| ISO 13357-2:2005 | Petroleum products -- Determination of the filterability of lubricating oils -- Part 2: Procedure for dry oils | ||||
| ISO 13503-2:2006 | Petroleum and natural gas industries -- Completion fluids and materials -- Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations | ||||
| ISO 8655-3:2002 | Piston-operated volumetric apparatus -- Part 3: Piston burettes | ||||
| ISO 5835-2:1978 | Implants for surgery -- Metal bone screws -- Dimensions -- Part 2: Screws with asymmetrical thread, constant fitting (spherical) |
若您对上表中数据有任何疑问，请与网站联系。
