（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 7250-1:2008 | Basic human body measurements for technological design -- Part 1: Body measurement definitions and landmarks | ||||
| ISO 15202-1:2012 | Workplace air -- Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry -- Part 1: Sampling | ||||
| ISO 15202-2:2001 | Workplace air -- Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry -- Part 2: Sample preparation | ||||
| ISO 15767:2003 | Workplace atmospheres -- Controlling and characterizing errors in weighing collected aerosols | ||||
| ISO 16200-2:2000 | Workplace air quality -- Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography -- Part 2: Diffusive sampling method | ||||
| ISO 16258-1:2015 | Workplace air -- Analysis of respirable crystalline silica by X-ray diffraction -- Part 1: Direct-on-filter method | ||||
| ISO 16702:2007 | Workplace air quality -- Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl)piperazine and liquid chromatography | ||||
| ISO 21438-2:2009 | Workplace atmospheres -- Determination of inorganic acids by ion chromatography -- Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) | ||||
| ISO 28439:2011 | Workplace atmospheres -- Characterization of ultrafine aerosols/nanoaerosols -- Determination of the size distribution and number concentration using differential electrical mobility analysing systems | ||||
| ISO 30011:2010 | Workplace air -- Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry | ||||
| ISO 1503:1977 | Geometrical orientation and directions of movements | ||||
| ISO 14119:2013 | Safety of machinery -- Interlocking devices associated with guards -- Principles for design and selection | ||||
| ISO 16063-13:2001 | Methods for the calibration of vibration and shock transducers -- Part 13: Primary shock calibration using laser interferometry | ||||
| ISO/DIS 16063-33 | Methods for the calibration of vibration and shock transducers -- Part 33: Testing of magnetic field sensitivity | ||||
| ISO 17359:2003 | Condition monitoring and diagnostics of machines -- General guidelines | ||||
| ISO 4126-4:2004/Cor 1:2007 | |||||
| ISO/CD 16028 | Hydraulic fluid power -- Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) -- Specifications | ||||
| ISO 4126-5:2013 | Safety devices for protection against excessive pressure -- Part 5: Controlled safety pressure relief systems (CSPRS) | ||||
| ISO 4126-5:2013/Amd 1:2016 | |||||
| ISO 6718:1985 | Bursting discs and bursting disc devices | ||||
| ISO 29661:2012/Amd 1:2015 | Reference point of personal dosemeters | ||||
| ISO/ASTM 51205:2009 | Practice for use of a ceric-cerous sulfate dosimetry system | ||||
| ISO 11665-4:2012 | Measurement of radioactivity in the environment -- Air: radon-222 -- Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis | ||||
| ISO 11665-9:2016 | Measurement of radioactivity in the environment -- Air: Radon-222 -- Part 9: Test methods for exhalation rate of building materials | ||||
| ISO/DIS 11704 | Water quality -- Gross alpha and gross beta activity -- Test method using liquid scintillation counting | ||||
| ISO 11929-1:2000 | Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 1: Fundamentals and application to counting measurements without the influence of sample treatment | ||||
| ISO 11929-3:2000 | Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 3: Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment | ||||
| ISO/CD 11929-3 | Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation -- Fundamentals and application -- Part 3: Applications to unfolding methods | ||||
| ISO 13165-2:2014 | Water quality -- Radium-226 -- Part 2: Test method using emanometry | ||||
| ISO/ASTM 51607:2013 | Practice for use of the alanine-EPR dosimetry system | ||||
| ISO 16793:2005/CD Amd 1 | |||||
| ISO 835-4:1981 | Laboratory glassware -- Graduated pipettes -- Part 4: Blow-out pipettes | ||||
| ISO 835-2:1981 | Laboratory glassware -- Graduated pipettes -- Part 2: Pipettes for which no waiting time is specified | ||||
| ISO/DTS 18409 | Hydraulic fluid power -- Hose and hose assemblies -- Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly | ||||
| ISO 2715:1981 | Liquid hydrocarbons -- Volumetric measurement by turbine meter systems | ||||
| ISO 144:1973 | Steel -- Reverse bend testing of wire | ||||
| ISO 6508-3:1999 | Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) | ||||
| ISO 6508-3:2005 | Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) | ||||
| ISO 7438:1985 | Metallic materials -- Bend test | ||||
| ISO 14577-3:2015 | Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks | ||||
| ISO 14577-3:2002 | Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks | ||||
| ISO 8249:1985 | Welding -- Determination of ferrite number in austenitic weld metal deposited by covered Cr-Ni steel electrodes | ||||
| ISO 9018:2015 | Destructive tests on welds in metallic materials -- Tensile test on cruciform and lapped joints | ||||
| ISO 10675-1:2016 | Non-destructive testing of welds -- Acceptance levels for radiographic testing -- Part 1: Steel, nickel, titanium and their alloys | ||||
| ISO 17643:2005 | Non-destructive testing of welds -- Eddy current testing of welds by complex-plane analysis | ||||
| ISO 16030:2001/Amd 1:2005 | |||||
| ISO 17653:2003 | Destructive tests on welds in metallic materials -- Torsion test of resistance spot welds | ||||
| ISO 17654:2003 | Destructive tests on welds in metallic materials -- Resistance welding -- Pressure test on resistance seam welds | ||||
| ISO 18278-3 | Resistance welding -- Weldability -- Part 3: Evaluation procedures for weldability in spot weld bonding | ||||
| ISO 17655:2003 | Destructive tests on welds in metallic materials -- Method for taking samples for delta ferrite measurement |
若您对上表中数据有任何疑问，请与网站联系。
