(清空日期可显示全部记录)
标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
---|---|---|---|---|---|
ISO 15883-1:2006 | Washer-disinfectors -- Part 1: General requirements, terms and definitions and tests | ||||
ISO/NP 15883-1 | Washer-disinfectors -- Part 1: General requirements, terms and definitions and tests | ||||
ISO 15883-2:2006 | Washer-disinfectors -- Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. | ||||
ISO 11607-1:2006 | Packaging for terminally sterilized medical devices -- Part 1: Requirements for materials, sterile barrier systems and packaging systems | ||||
ISO 15500-3:2001 | Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 3: Check valve | ||||
ISO 15883-7:2016 | Washer-disinfectors -- Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment | ||||
ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices -- Guidance on the application of ISO 11607-1 and ISO 11607-2 | ||||
ISO/TS 10993-20:2006 | Biological evaluation of medical devices -- Part 20: Principles and methods for immunotoxicology testing of medical devices | ||||
ISO/TR 10993-22 | Biological evaluation of medical devices -- Part 22: Guidance on nanomaterials | ||||
ISO 13022:2012 | Medical products containing viable human cells -- Application of risk management and requirements for processing practices | ||||
ISO/TR 37152:2016 | Smart community infrastructures -- Common framework for development and operation | ||||
ISO 27913:2016 | Carbon dioxide capture, transportation and geological storage -- Pipeline transportation systems | ||||
ISO/DIS 27919-1 | Carbon dioxide capture -- Part 1: Performance evaluation methods for post-combustion CO2 capture integrated with a power plant | ||||
ISO/TS 14071:2014 | Environmental management -- Life cycle assessment -- Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006 | ||||
ISO 16304:2013 | Ships and marine technology -- Marine environment protection -- Arrangement and management of port waste reception facilities | ||||
ISO 11222:2002 | Air quality -- Determination of the uncertainty of the time average of air quality measurements | ||||
ISO 16000-6:2011 | Indoor air -- Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID | ||||
ISO 16000-8:2007 | Indoor air -- Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions | ||||
ISO 16000-7:2007 | Indoor air -- Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations | ||||
ISO 16000-14:2009 | Indoor air -- Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) -- Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry | ||||
ISO 16000-23:2009 | Indoor air -- Part 23: Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials | ||||
ISO 9461:1992 | Hydraulic fluid power -- Identification of valve ports, subplates, control devices and solenoids | ||||
ISO 16000-24:2009 | Indoor air -- Part 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials | ||||
ISO 16000-27:2014 | Indoor air -- Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) | ||||
ISO 16000-29:2014 | Indoor air -- Part 29: Test methods for VOC detectors | ||||
ISO 16000-28:2012 | Indoor air -- Part 28: Determination of odour emissions from building products using test chambers | ||||
ISO/FDIS 16000-33 | Indoor air -- Part 33: Determination of phthalates with gas chromatography/mass spectrometry (GC/MS) | ||||
ISO 6439:1990 | Water quality -- Determination of phenol index -- 4-Aminoantipyrine spectrometric methods after distillation | ||||
ISO 16000-30:2014 | Indoor air -- Part 30: Sensory testing of indoor air | ||||
ISO 7934:1989 | Stationary source emissions -- Determination of the mass concentration of sulfur dioxide -- Hydrogen peroxide/barium perchlorate/Thorin method | ||||
ISO 5814:2012 | Water quality -- Determination of dissolved oxygen -- Electrochemical probe method | ||||
ISO 5815:1989 | Water quality -- Determination of biochemical oxygen demand after 5 days (BOD 5) -- Dilution and seeding method | ||||
ISO 6333:1986 | Water quality -- Determination of manganese -- Formaldoxime spectrometric method | ||||
ISO 6060:1989 | Water quality -- Determination of the chemical oxygen demand | ||||
ISO 15913:2000 | Water quality -- Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization | ||||
ISO 17289:2014 | Water quality -- Determination of dissolved oxygen -- Optical sensor method | ||||
ISO 22478:2006 | Water quality -- Determination of certain explosives and related compounds -- Method using high-performance liquid chromatography (HPLC) with UV detection | ||||
ISO 7027:1999 | Water quality -- Determination of turbidity | ||||
ISO 17402:2008 | Soil quality -- Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials | ||||
ISO 28258:2013 | Soil quality -- Digital exchange of soil-related data | ||||
ISO 18400-103:2017 | Soil quality -- Sampling -- Part 103: Safety | ||||
ISO 18400-100:2017 | Soil quality -- Sampling -- Part 100: Guidance on the selection of sampling standards | ||||
ISO 12914:2012 | Soil quality -- Microwave-assisted extraction of the aqua regia soluble fraction for the determination of elements | ||||
ISO/TS 13907:2012 | Soil quality -- Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates -- Method by gas chromatography with mass selective detection (GC-MS) | ||||
ISO 5172:2006/Amd 2:2015 | |||||
ISO/DIS 4957 | Tool steels | ||||
ISO 15500-5:2012/Amd 1:2016 | |||||
ISO 604:1973 | Plastics -- Determination of compressive properties | ||||
ISO 527-2:1993/Cor 1:1994 | |||||
ISO 604:2002 | Plastics -- Determination of compressive properties |
若您对上表中数据有任何疑问,请与网站联系。