（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/DIS 4032 | Hexagon regular nuts (style 1) -- Product grades A and B | ||||
| ISO 15973:2000 | Closed end blind rivets with break pull mandrel and protruding head -- AlA/St | ||||
| ISO 2873:2000 | Packaging -- Complete, filled transport packages and unit loads -- Low pressure test | ||||
| ISO 2875:1985 | Packaging -- Complete, filled transport packages -- Water spray test | ||||
| ISO 14951-5:1999 | Space systems -- Fluid characteristics -- Part 5: Nitrogen tetroxide propellant | ||||
| ISO/NP 12957-1 | Geosynthetics -- Determination of friction characteristics -- Part 1: Direct shear test | ||||
| ISO 19389:2014 | Space data and information transfer systems -- Conjunction data message | ||||
| ISO 3058:1998 | Non-destructive testing -- Aids to visual inspection -- Selection of low-power magnifiers | ||||
| ISO 4586-1:1981 | Plastics -- Decorative laminated sheets based on thermosetting resins -- Part 1: Specification | ||||
| ISO/FDIS 129-1 | Technical product documentation (TPD) -- Presentation of dimensions and tolerances -- Part 1: General principles | ||||
| ISO 3480:1976 | Polypropylene (PP) pipes -- Maximum permissible longitudinal reversion | ||||
| ISO 3098-3:1987 | Technical drawings -- Lettering -- Part 3: Diacritical and particular marks for the Latin alphabet | ||||
| ISO/CD 15392 | Sustainability in building construction -- General principles | ||||
| ISO 1101:1983/Ext 1:1983 | Toleranced characteristics and symbols -- Examples of indication and interpretation | ||||
| ISO 15686-1:2000 | Buildings and constructed assets -- Service life planning -- Part 1: General principles | ||||
| ISO/DIS 16813 | Building environment design -- Indoor environment -- General principles | ||||
| ISO 15306:2003/Amd 1:2012 | |||||
| ISO/TR 10993-9:1994 | Biological evaluation of medical devices -- Part 9: Degradation of materials related to biological testing | ||||
| ISO 7842:1988 | Automatic steam traps -- Determination of discharge capacity -- Test methods | ||||
| ISO/DIS 21307.2 | Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) piping systems | ||||
| ISO 8162:1985 | Glass containers -- Tall crown finishes -- Dimensions | ||||
| ISO 9008:1991 | Glass bottles -- Verticality -- Test method | ||||
| ISO 8362-3:2001 | Injection containers and accessories -- Part 3: Aluminium caps for injection vials | ||||
| ISO/CD 11126-3 | Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 3: Copper refinery slag | ||||
| ISO 6301-2:1997 | Pneumatic fluid power -- Compressed-air lubricators -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature | ||||
| ISO 5630-6:2009 | Paper and board -- Accelerated ageing -- Part 6: Exposure to atmospheric pollution (nitrogen dioxide) | ||||
| ISO 5631-1:2015 | Paper and board -- Determination of colour by diffuse reflectance -- Part 1: Indoor daylight conditions (C/2 degrees) | ||||
| ISO 5631-2:2008 | Paper and board -- Determination of colour by diffuse reflectance -- Part 2: Outdoor daylight conditions (D65/10 degrees) | ||||
| ISO 5636-4:1986 | Paper and board -- Determination of air permeance (medium range) -- Part 4: Sheffield method | ||||
| ISO 5631-2:2014 | Paper and board -- Determination of colour by diffuse reflectance -- Part 2: Outdoor daylight conditions (D65/10 degrees) | ||||
| ISO 5631-2:2015 | Paper and board -- Determination of colour by diffuse reflectance -- Part 2: Outdoor daylight conditions (D65/10 degrees) | ||||
| ISO 5631-3:2014 | Paper and board -- Determination of colour by diffuse reflectance -- Part 3: Indoor illumination conditions (D50/2 degrees) | ||||
| ISO 5631-3:2008 | Paper and board -- Determination of colour by diffuse reflectance -- Part 3: Indoor illumination conditions (D50/2 degrees) | ||||
| ISO 5636-3:1992 | Paper and board -- Determination of air permeance (medium range) -- Part 3: Bendtsen method | ||||
| ISO 5636-2:1984 | Paper and board -- Determination of air permeance (medium range) -- Part 2: Schopper method | ||||
| ISO 8254-2:2003 | Paper and board -- Measurement of specular gloss -- Part 2: 75 degree gloss with a parallel beam, DIN method | ||||
| ISO 8254-3:2016 | Paper and board -- Measurement of specular gloss -- Part 3: 20 degree gloss with a converging beam, TAPPI method | ||||
| ISO 8254-3:2004 | Paper and board -- Measurement of specular gloss -- Part 3: 20 degree gloss with a converging beam, TAPPI method | ||||
| ISO 8791-2:2013 | Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 2: Bendtsen method | ||||
| ISO 8791-3:2005 | Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 3: Sheffield method | ||||
| ISO 11093-9:2006 | Paper and board -- Testing of cores -- Part 9: Determination of flat crush resistance | ||||
| ISO 11556:2005 | Paper and board -- Determination of curl using a single vertically suspended test piece | ||||
| ISO 6182-5:1995 | Fire protection -- Automatic sprinkler systems -- Part 5: Requirements and test methods for deluge valves | ||||
| ISO 12625-6:2005 | Tissue paper and tissue products -- Part 6: Determination of grammage | ||||
| ISO 12625-6:2016 | Tissue paper and tissue products -- Part 6: Determination of grammage | ||||
| ISO 12625-7:2007 | Tissue paper and tissue products -- Part 7: Determination of optical properties | ||||
| ISO 12625-8:2010 | Tissue paper and tissue products -- Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method | ||||
| ISO 12625-15:2015 | Tissue paper and tissue products -- Part 15: Determination of optical properties -- Measurement of brightness and colour with C/2° (indoor daylight) illuminant | ||||
| ISO 13542:2006 | Paper and board -- Specification for internal diameters of cores for reels | ||||
| ISO 16260:2016 | Paper and board -- Determination of internal bond strength |
若您对上表中数据有任何疑问，请与网站联系。
