（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 4742:1984 | Copper alloys -- Determination of nickel content -- Gravimetric method | ||||
| ISO 4748:1984 | Copper alloys -- Determination of iron content -- Na2EDTA titrimetric method | ||||
| ISO 4749:1984 | Copper alloys -- Determination of lead content -- Flame atomic absorption spectrometric method | ||||
| ISO 6283:1979 | Refined nickel | ||||
| ISO 7523:1985 | Nickel -- Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents -- Electrothermal atomic absorption spectrometric method | ||||
| ISO 6768:1998 | Ambient air -- Determination of mass concentration of nitrogen dioxide -- Modified Griess-Saltzman method | ||||
| ISO 7530-1:1990 | Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 1: General requirements and sample dissolution | ||||
| ISO 7530-3:1990 | Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 3: Determination of chromium content | ||||
| ISO 7530-2:1990 | Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 2: Determination of cobalt content | ||||
| ISO/NP 16620-2 | Plastics -- Biobased content -- Part 2: Determination of biobased carbon content | ||||
| ISO 7530-5:1990 | Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 5: Determination of iron content | ||||
| ISO 11435:2011 | Nickel alloys -- Determination of molybdenum content -- Inductively coupled plasma/atomic emission spectrometric method | ||||
| ISO 11437-1:1994 | Nickel alloys -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 1: General requirements and sample dissolution | ||||
| ISO/TS 18223:2015 | Nickel alloys -- Determination of Nickel content -- Inductively coupled plasma atomic emission spectrometric method | ||||
| ISO 11461:2001 | Soil quality -- Determination of soil water content as a volume fraction using coring sleeves -- Gravimetric method | ||||
| ISO 22960:2008 | Titanium and titanium alloys -- Determination of iron -- Molecular absorption spectrometry using 1, 10-phenanthroline | ||||
| ISO 22963:2008 | Titanium and titanium alloys -- Determination of oxygen -- Infrared method after fusion under inert gas | ||||
| ISO 715:1975 | Zinc -- Determination of lead content -- Polarographic method | ||||
| ISO 714:1975 | Zinc -- Determination of iron content -- Photometric method | ||||
| ISO 752:1981 | Zinc ingots | ||||
| ISO 3817:1976 | Zinc alloy ingots -- Selection and preparation of samples for spectrographic analysis | ||||
| ISO 20081:2005 | Zinc and zinc alloys -- Method of sampling -- Specifications | ||||
| ISO 6361-2:2014 | Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 2: Mechanical properties | ||||
| ISO/DIS 8144-1 | Thermal insulation -- Mineral wool mats for ventilated roof spaces -- Part 1: Specification for applications with restricted ventilation | ||||
| ISO 6361-2:2011 | Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 2: Mechanical properties | ||||
| ISO 6361-3:2014 | Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 3: Strips: Tolerances on shape and dimensions | ||||
| ISO 6361-4:1988 | Wrought aluminium and aluminium alloy sheets, strips and plates -- Part 4: Sheets and plates -- Tolerances on form and dimensions | ||||
| ISO 6362-4:1988 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 4: Extruded profiles -- Tolerances on shape and dimensions | ||||
| ISO 6362-5:2001 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 5: Extruded round, square and hexagonal bars -- Tolerances on shape and dimensions | ||||
| ISO 6363-3:2012 | Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars, tubes and wires -- Part 3: Drawn round bars and wires -- Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter) | ||||
| ISO 6363-4:1991 | Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 4: Drawn rectangular bars -- Tolerances on form and dimensions | ||||
| ISO 6363-5:1992 | Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 5: Drawn square and hexagonal bars -- Tolerances on form and dimensions | ||||
| ISO 2377:1972 | Magnesium alloy sand castings -- Reference test bar | ||||
| ISO 16220:2005 | Magnesium and magnesium alloys -- Magnesium alloy ingots and castings | ||||
| ISO 9722:1992 | Nickel and nickel alloys -- Composition and forms of wrought products | ||||
| ISO 9427:1989 | Wood-based panels -- Determination of density | ||||
| ISO 12460-3:2008 | Wood-based panels -- Determination of formaldehyde release -- Part 3: Gas analysis method | ||||
| ISO 16893-2:2010 | Wood-based panels -- Particleboard -- Part 2: Requirements | ||||
| ISO 695:1984 | Glass -- Resistance to attack by a boiling aqueous solution of mixed alkali -- Method of test and classification | ||||
| ISO 3585:1991 | Borosilicate glass 3.3 -- Properties | ||||
| ISO 7884-6:1987 | Glass -- Viscosity and viscometric fixed points -- Part 6: Determination of softening point | ||||
| ISO 7884-7:1987 | Glass -- Viscosity and viscometric fixed points -- Part 7: Determination of annealing point and strain point by beam bending | ||||
| ISO 8424:1996 | Raw optical glass -- Resistance to attack by aqueous acidic solutions at 25 degrees C -- Test method and classification | ||||
| ISO 8424:1987 | Raw optical glass -- Testing of the resistance to attack by aqueous acidic solutions at 25 degrees C and classification | ||||
| ISO 12844:1999 | Raw optical glass -- Grindability with diamond pellets -- Test method and classification | ||||
| ISO/CD 17282 | Plastics -- Guide to the acquisition and presentation of design data | ||||
| ISO 13007-3:2010 | Ceramic tiles -- Grouts and adhesives -- Part 3: Terms, definitions and specifications for grouts | ||||
| ISO/CD 21066 | Fine ceramics (advanced ceramics, advanced technical ceramics) -- Qualitative and semiquantitative assessment of the photocatalytic activities of surfaces by the reduction of resazurin in a deposited ink film | ||||
| ISO 179-1:2000/Amd 1:2005 | |||||
| ISO 6301-2:2006 | Pneumatic fluid power -- Compressed-air lubricators -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature |
若您对上表中数据有任何疑问，请与网站联系。
