（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 16784-1:2006 | Corrosion of metals and alloys -- Corrosion and fouling in industrial cooling water systems -- Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems | ||||
| ISO 17475:2005 | Corrosion of metals and alloys -- Electrochemical test methods -- Guidelines for conducting potentiostatic and potentiodynamic polarization measurements | ||||
| ISO 17864:2005 | Corrosion of metals and alloys -- Determination of the critical pitting temperature under potientiostatic control | ||||
| ISO/DIS 20728 | Corrosion of metal and alloys -- Determination of resistance of magnesium alloys to stress corrosion cracking | ||||
| ISO 9000-3:1991 | Quality management and quality assurance standards -- Part 3: Guidelines for the application of ISO 9001 to the development, supply and maintenance of software | ||||
| ISO 9002:1987 | Quality systems -- Model for quality assurance in production and installation | ||||
| ISO 9003:1994/Cor 1:1994 | |||||
| ISO/AWI 14006 | Environmental management systems -- Guidelines for incorporating ecodesign | ||||
| ISO/FDIS 10987-2 | Earth-moving machinery -- Sustainability -- Part 2: Remanufacturing | ||||
| ISO 7967-9:2010 | Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 9: Control and monitoring systems | ||||
| ISO/NP 8178-9 | Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions | ||||
| ISO 13332:2000 | Reciprocating internal combustion engines -- Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet | ||||
| ISO 5149-1:2014 | Refrigerating systems and heat pumps -- Safety and environmental requirements -- Part 1: Definitions, classification and selection criteria | ||||
| ISO 13971:2012 | Refrigeration systems and heat pumps -- Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes -- Requirements and classification | ||||
| ISO 16559:2014 | Solid biofuels -- Terminology, definitions and descriptions | ||||
| ISO 16993:2016 | Solid biofuels -- Conversion of analytical results from one basis to another | ||||
| ISO 16993:2015 | Solid biofuels -- Conversion of analytical results from one basis to another | ||||
| ISO 16994:2016 | Solid biofuels -- Determination of total content of sulfur and chlorine | ||||
| ISO 2941:1974 | Hydraulic fluid power -- Filter elements -- Verification of collapse/burst resistance | ||||
| ISO 16994:2015 | Solid biofuels -- Determination of total content of sulfur and chlorine | ||||
| ISO 17225-1:2014 | Solid biofuels -- Fuel specifications and classes -- Part 1: General requirements | ||||
| ISO 17225-2:2014 | Solid biofuels -- Fuel specifications and classes -- Part 2: Graded wood pellets | ||||
| ISO/TS 17225-8:2016 | Solid biofuels -- Fuel specifications and classes -- Part 8: Graded thermally treated and densified biomass fuels | ||||
| ISO 730-3:1982 | Agricultural wheeled tractors -- Three-point linkage -- Part 3: Category 4 | ||||
| ISO 17827-1:2016 | Solid biofuels -- Determination of particle size distribution for uncompressed fuels -- Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above | ||||
| ISO 17827-2:2016 | Solid biofuels -- Determination of particle size distribution for uncompressed fuels -- Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below | ||||
| ISO 18134-1:2015 | Solid biofuels -- Determination of moisture content -- Oven dry method -- Part 1: Total moisture -- Reference method | ||||
| ISO 18125:2017 | Solid biofuels -- Determination of calorific value | ||||
| ISO 18134-3:2015 | Solid biofuels -- Determination of moisture content -- Oven dry method -- Part 3: Moisture in general analysis sample | ||||
| ISO 5149:1993 | Mechanical refrigerating systems used for cooling and heating -- Safety requirements | ||||
| ISO 1992-1:1974 | Commercial refrigerated cabinets -- Methods of test -- Part 1: Calculation of linear dimensions, areas and volumes | ||||
| ISO 23953-1:2015 | Refrigerated display cabinets -- Part 1: Vocabulary | ||||
| ISO 23953-2:2005 | Refrigerated display cabinets -- Part 2: Classification, requirements and test conditions | ||||
| ISO/R 825-1:1968 | Household refrigerators -- Part 1: Special low-temperature compartments for the storage of frozen foodstuffs | ||||
| ISO 7371:1995 | Household refrigerating appliances -- Refrigerators with or without low-temperature compartment -- Characteristics and test methods | ||||
| ISO 9251:1987 | Thermal insulation -- Heat transfer conditions and properties of materials -- Vocabulary | ||||
| ISO/NP 6469-1 | Electrically propelled road vehicles -- Safety specifications -- Part 1: On-board rechargeable energy storage system (RESS) | ||||
| ISO 6469-3:2001 | Electric road vehicles -- Safety specifications -- Part 3: Protection of persons against electric hazards | ||||
| ISO 11810:2015 | Lasers and laser-related equipment -- Test method and classification for the laser resistance of surgical drapes and/or patient protective covers -- Primary ignition, penetration, flame spread and secondary ignition | ||||
| ISO/IEC 9075-10:2008/Cor 1:2010 | |||||
| ISO/IEC 14598-4:1999 | Software engineering -- Product evaluation -- Part 4: Process for acquirers | ||||
| ISO/IEC 15802-4:1994 | Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Common specifications -- Part 4: System load protocol | ||||
| ISO 789-2:1983 | Agricultural tractors -- Test procedures -- Part 2: Hydraulic power and lifting capacity | ||||
| ISO/IEC 8632-2:1992 | Information technology -- Computer graphics -- Metafile for the storage and transfer of picture description information -- Part 2: Character encoding | ||||
| ISO 4211-2:2013 | Furniture -- Tests for surface finishes -- Part 2: Assessment of resistance to wet heat | ||||
| ISO 22879:2004 | Castors and wheels -- Requirements for castors for furniture | ||||
| ISO 8578:2012 | Microscopes -- Marking of objectives and eyepieces | ||||
| ISO/CD 10110-12 | Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 12: Aspheric surfaces | ||||
| ISO 14132-4:2002 | Optics and optical instruments -- Vocabulary for telescopic systems -- Part 4: Terms for astronomical telescopes | ||||
| ISO 14490-7:2005 | Optics and optical instruments -- Test methods for telescopic systems -- Part 7: Test methods for limit of resolution |
若您对上表中数据有任何疑问，请与网站联系。
