（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 9174:1990 | Water quality -- Determination of total chromium -- Atomic absorption spectrometric methods | ||||
| ISO 9174:1998 | Water quality -- Determination of chromium -- Atomic absorption spectrometric methods | ||||
| ISO 9297:1989 | Water quality -- Determination of chloride -- Silver nitrate titration with chromate indicator (Mohr's method) | ||||
| ISO 9963-1:1994 | Water quality -- Determination of alkalinity -- Part 1: Determination of total and composite alkalinity | ||||
| ISO 3724:1976 | Hydraulic fluid power -- Filter elements -- Verification of flow fatigue characteristics | ||||
| ISO 9562:2004 | Water quality -- Determination of adsorbable organically bound halogens (AOX) | ||||
| ISO 9964-2:1993 | Water quality -- Determination of sodium and potassium -- Part 2: Determination of potassium by atomic absorption spectrometry | ||||
| ISO 9964-3:1993 | Water quality -- Determination of sodium and potassium -- Part 3: Determination of sodium and potassium by flame emission spectrometry | ||||
| ISO 500-3:2004 | Agricultural tractors -- Rear-mounted power take-off types 1, 2 and 3 -- Part 3: Main PTO dimensions and spline dimensions, location of PTO | ||||
| ISO 9965:1993 | Water quality -- Determination of selenium -- Atomic absorption spectrometric method (hydride technique) | ||||
| ISO 17378-1:2014 | Water quality -- Determination of arsenic and antimony -- Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS) | ||||
| ISO 27108:2010 | Water quality -- Determination of selected plant treatment agents and biocide products -- Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) | ||||
| ISO 23913:2006 | Water quality -- Determination of chromium(VI) -- Method using flow analysis (FIA and CFA) and spectrometric detection | ||||
| ISO/FDIS 3968 | Hydraulic fluid power -- Filters -- Evaluation of differential pressure versus flow | ||||
| ISO 24293:2009 | Water quality -- Determination of individual isomers of nonylphenol -- Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS) | ||||
| ISO 7887:1994 | Water quality -- Examination and determination of colour | ||||
| ISO 12782-3:2012 | Soil quality -- Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials -- Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid | ||||
| ISO 12782-4:2012 | Soil quality -- Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials -- Part 4: Extraction of humic substances from solid samples | ||||
| ISO 13914:2013 | Soil quality -- Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high-resolution mass selective detection (GC/HRMS) | ||||
| ISO 16198:2015 | Soil quality -- Plant-based test to assess the environmental bioavailability of trace elements to plants | ||||
| ISO 15685:2012 | Soil quality -- Determination of potential nitrification and inhibition of nitrification -- Rapid test by ammonium oxidation | ||||
| ISO 8010:1988 | Compressors for the process industry -- Screw and related types -- Specifications and data sheets for their design and construction | ||||
| ISO 16387:2014 | Soil quality -- Effects of contaminants on Enchytraeidae (Enchytraeus sp.) -- Determination of effects on reproduction | ||||
| ISO/DIS 16751 | Soil quality -- Environmental availability of non-polar organic compounds -- Determination of the potential bioavailable fraction and the non-bioavailable fraction using a strong adsorbent or complexing agent | ||||
| ISO 22846-2:2012 | Personal equipment for protection against falls -- Rope access systems -- Part 2: Code of practice | ||||
| ISO 495:1966 | Withdrawal of ISO/R 495-1966 | ||||
| ISO/DIS 3743-2 | Acoustics -- Determination of sound power levels of noise sources using sound pressure -- Engineering methods for small, movable sources in reverberant fields -- Part 2: Methods for special reverberation test rooms | ||||
| ISO 3743-1:1994 | Acoustics -- Determination of sound power levels of noise sources -- Engineering methods for small, movable sources in reverberant fields -- Part 1: Comparison method for hard-walled test rooms | ||||
| ISO 3741:2010 | Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Precision methods for reverberation test rooms | ||||
| ISO 10534-1:1996 | Acoustics -- Determination of sound absorption coefficient and impedance in impedance tubes -- Part 1: Method using standing wave ratio | ||||
| ISO 11904-1:2002/Cor 1:2004 | |||||
| ISO/TR 17534-2:2014 | Acoustics -- Software for the calculation of sound outdoors -- Part 2: General recommendations for test cases and quality assurance interface | ||||
| ISO 7574-1:1985 | Acoustics -- Statistical methods for determining and verifying stated noise emission values of machinery and equipment -- Part 1: General considerations and definitions | ||||
| ISO 7574-2:1985 | Acoustics -- Statistical methods for determining and verifying stated noise emission values of machinery and equipment -- Part 2: Methods for stated values for individual machines | ||||
| ISO 11689:1996 | Acoustics -- Procedure for the comparison of noise-emission data for machinery and equipment | ||||
| ISO/FDIS 26367-2 | Guidelines for assessing the adverse environmental impact of fire effluents -- Part 2: Methodology for compiling data on environmentally significant emissions from fires | ||||
| ISO/R 1326:1970 | Plastics -- Determination of flammability and burning rate of plastics in the form of film | ||||
| ISO 4589-2:1996 | Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test | ||||
| ISO 15791-1:2014 | Plastics -- Development and use of intermediate-scale fire tests for plastics products -- Part 1: General guidance | ||||
| ISO/TS 18684:2015 | Timekeeping instruments -- Watch external parts made of hard materials -- General requirements and test methods | ||||
| ISO 29468:2008 | Thermal insulating products for building applications -- Determination of flatness | ||||
| ISO 2537:1985 | Liquid flow measurement in open channels -- Cup-type and propeller-type current-meters | ||||
| ISO 4377:1990 | Liquid flow measurement in open channels -- Flat-V weirs | ||||
| ISO 6416:1985 | Liquid flow measurement in open channels -- Measurement of discharge by the ultrasonic (acoustic) method | ||||
| ISO 9335:1995/Cor 1:2005 | |||||
| ISO 6142:1981/Add 1:1983 | |||||
| ISO/DIS 20289 | Surface chemical analysis -- Total reflection X-ray fluorescence analysis of water | ||||
| ISO 4762:2004 | Hexagon socket head cap screws | ||||
| ISO/DIS 7040 | Prevailing torque hexagon regular nuts (with non-metallic insert) -- Product grades A and B | ||||
| ISO 7042:1997 | Prevailing torque type all-metal hexagon nuts, style 2 -- Property classes 5, 8, 10 and 12 |
若您对上表中数据有任何疑问，请与网站联系。
