（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 10303-46:1994/Cor 3:2006 | |||||
| ISO 7240-22:2007 | Fire detection and alarm systems -- Part 22: Smoke-detection equipment for ducts | ||||
| ISO 7240-27:2009 | Fire detection and alarm systems -- Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor | ||||
| ISO 7986:1997 | Hydraulic fluid power -- Sealing devices -- Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications | ||||
| ISO 7240-25:2010 | Fire detection and fire alarm systems -- Part 25: Components using radio transmission paths | ||||
| ISO 7240-28:2014 | Fire detection and alarm systems -- Part 28: Fire protection control equipment | ||||
| ISO/CD 5660-5 | Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 5: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under oxygen reduced atmospheres | ||||
| ISO 12239:2003 | Fire detection and fire alarm systems -- Smoke alarms | ||||
| ISO/TR 17755:2014 | Fire safety -- Overview of national fire statistics practices | ||||
| ISO 11170:1995 | Hydraulic fluid power -- Filter elements -- Procedure for verifying performance characteristics | ||||
| ISO 21927-1:2008 | Smoke and heat control systems -- Part 1: Specification for smoke barriers | ||||
| ISO 21927-8:2017 | Smoke and heat control systems -- Part 8: Smoke control dampers | ||||
| ISO 21927-7:2017 | Smoke and heat control systems -- Part 7: Smoke ducts sections | ||||
| ISO/TR 834-2:2009 | Fire-resistance tests -- Elements of building construction -- Part 2: Guidance on measuring uniformity of furnace exposure on test samples | ||||
| ISO/TR 834-3:2012 | Fire-resistance tests -- Elements of building construction -- Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test | ||||
| ISO 834-9:2003 | Fire-resistance tests -- Elements of building construction -- Part 9: Specific requirements for non-loadbearing ceiling elements | ||||
| ISO 834-12:2012 | Fire resistance tests -- Elements of building construction -- Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces | ||||
| ISO 5658-4:2001 | Reaction to fire tests -- Spread of flame -- Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen | ||||
| ISO/TS 5660-3:2012 | Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 3: Guidance on measurement | ||||
| ISO/TR 10158:1991 | Principles and rationale underlying calculation methods in relation to fire resistance of structural elements | ||||
| ISO 10295-2:2009 | Fire tests for building elements and components -- Fire testing of service installations -- Part 2: Linear joint (gap) seals | ||||
| ISO/NP 11925-2 | Reaction to fire tests -- Ignitability of products subjected to direct impingement of flame -- Part 2: Single-flame source test | ||||
| ISO 12468-2:2013 | External exposure of roofs to fire -- Part 2: Classification of roofs | ||||
| ISO 13784-1:2002 | Reaction-to-fire tests for sandwich panel building systems -- Part 1: Test method for small rooms | ||||
| ISO 13785-2:2002 | Reaction-to-fire tests for façades -- Part 2: Large-scale test | ||||
| ISO 105-A08:2001 | Textiles -- Tests for colour fastness -- Part A08: Vocabulary used in colour measurement | ||||
| ISO 14697:2007 | Reaction-to-fire tests -- Guidance on the choice of substrates for building and transport products | ||||
| ISO 17554:2005 | Reaction to fire tests -- Mass loss measurement | ||||
| ISO 22899-1:2007 | Determination of the resistance to jet fires of passive fire protection materials -- Part 1: General requirements | ||||
| ISO 3443-5:1982 | Building construction -- Tolerances for building -- Part 5: Series of values to be used for specification of tolerances | ||||
| ISO 3443-7:1988 | Tolerances for building -- Part 7: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control -- Method 2 (Statistical control method) | ||||
| ISO 4463:1979 | Measurement methods for building -- Setting out and measurement -- Permissible measuring deviations | ||||
| ISO 4463-2:1995 | Measurement methods for building -- Setting-out and measurement -- Part 2: Measuring stations and targets | ||||
| ISO 7976-1:1989 | Tolerances for building -- Methods of measurement of buildings and building products -- Part 1: Methods and instruments | ||||
| ISO 12491:1997 | Statistical methods for quality control of building materials and components | ||||
| ISO 11886:2002/Cor 1:2006 | |||||
| ISO 17740-1:2015 | Building construction machinery and equipment -- Concrete placing systems for stationary equipment -- Part 1: Terminology and commercial specifications | ||||
| ISO 18650-2:2006 | Building construction machinery and equipment -- Concrete mixers -- Part 2: Procedure for examination of mixing efficiency | ||||
| ISO/DIS 19432-1 | Building construction machinery and equipment -- Portable, hand-held, internal-combustion-engine-driven abrasive cutting machines -- Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels | ||||
| ISO 19452:2008 | Building construction machinery and equipment -- Pedestrian-controlled vibratory (percussion) rammers -- Terminology and commercial specifications | ||||
| ISO 21573-1:2006 | Building construction machinery and equipment -- Concrete pumps -- Part 1: Terminology and commercial specifications | ||||
| ISO 21592:2006 | Machines et matériels pour la construction des bâtiments -- Machines à projeter le béton -- Terminologie et spécifications commerciales | ||||
| ISO 5261:1981 | Technical drawings for structural metal work | ||||
| ISO/TR 4191:2014 | Plastics piping systems for water supply -- Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) -- Guidance for installation | ||||
| ISO 4422-3:1996 | Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 3: Fittings and joints | ||||
| ISO 4422-2:1996 | Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 2: Pipes (with or without integral sockets) | ||||
| ISO 4422-5:1997 | Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 5: Fitness for purpose of the system | ||||
| ISO 4427-3:2007 | Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings | ||||
| ISO 8795:2001 | Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints | ||||
| ISO 11298-1:2010 | Plastics piping systems for renovation of underground water supply networks -- Part 1: General |
若您对上表中数据有任何疑问，请与网站联系。
