（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 6486-2:1981 | Ceramic ware in contact with food -- Release of lead and cadmium -- Part 2: Permissible limits | ||||
| ISO 488:2008 | Milk -- Determination of fat content -- Gerber butyrometers | ||||
| ISO 419:1972 | Photographic grade sodium thiosulphate, crystalline -- Specification | ||||
| ISO 3622:1976 | Photographic grade ammonium thiocyanate -- Specification | ||||
| ISO 3622:1996 | Photography -- Processing chemicals -- Specifications for ammonium thiocyanate | ||||
| ISO 3626:1996 | Photography -- Processing chemicals -- Specifications for potassium thiocyanate | ||||
| ISO 5990:1996 | Photography -- Processing chemicals -- Specifications for potassium sulfite, 650 g/l aqueous solution | ||||
| ISO 2846-2:2000 | Graphic technology -- Colour and transparency of printing ink sets for four-colour-printing -- Part 2: Coldset offset lithographic printing | ||||
| ISO/R 339:1963 | Withdrawal of ISO/R 339-1963 | ||||
| ISO 2808:1974 | Paints and varnishes -- Determination of film thickness | ||||
| ISO/CD 2812-2 | Paints and varnishes -- Determination of resistance to liquids -- Part 2: Water immersion method | ||||
| ISO 8130-12:1998 | Coating powders -- Part 12: Determination of compatibility | ||||
| ISO 9117-2:2010 | Paints and varnishes -- Drying tests -- Part 2: Pressure test for stackability | ||||
| ISO 12137-1:1997/Cor 1:1998 | |||||
| ISO 17463:2014 | Paints and varnishes -- Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique | ||||
| ISO/CD TS 19392-3 | Paints and varnishes -- Coating systems for wind-turbine rotor blades -- Part 3: Determination and evaluation of resistance to rain erosion using water jet | ||||
| ISO/CD TS 19392-2 | Paints and varnishes -- Coating systems for wind-turbine rotor blades -- Part 2: Determination and evaluation of resistance to rain erosion using rotating arm | ||||
| ISO/DIS 19426-5 | Structures for mine shafts -- Part 5: Shaft system structures | ||||
| ISO 334:1975 | Coal and coke -- Determination of total sulphur -- Eschka method | ||||
| ISO 15237:2016 | Solid mineral fuels -- Determination of total mercury content of coal | ||||
| ISO 1928:1995 | Solid mineral fuels -- Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value | ||||
| ISO/DIS 11726 | Solid mineral fuels -- Guidelines for the validation of alternative methods of analysis | ||||
| ISO/TS 18806:2014 | Solid mineral fuels -- Determination of Chlorine content | ||||
| ISO 2596:1984 | Iron ores -- Determination of hygroscopic moisture in analytical samples -- Gravimetric and Karl Fischer methods | ||||
| ISO 5438:1985 | Acid-grade and ceramic-grade fluorspar -- Determination of silica content -- Reduced molybdosilicate spectrometric method | ||||
| ISO 12213-3:1997 | Natural gas -- Calculation of compression factor -- Part 3: Calculation using physical properties | ||||
| ISO/TS 16922:2002 | Natural gas -- Guidelines for odorizing gases | ||||
| ISO 3104:1994/Cor 1:1997 | |||||
| ISO 11158:2009 | Lubricants, industrial oils and related products (class L) -- Family H (hydraulic systems) -- Specifications for categories HH, HL, HM, HV and HG | ||||
| ISO 11617:2014 | Buildings and civil engineering works -- Sealants -- Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling | ||||
| ISO 6872:1984 | Dental ceramic | ||||
| ISO 7490:2000 | Dental gypsum-bonded casting investments | ||||
| ISO 8891:1998 | Dental casting alloys with noble metal content of at least 25 % but less than 75 % | ||||
| ISO/TS 17988:2014 | Dentistry -- Corrosion test methods for dental amalgam | ||||
| ISO 24234:2004/Amd 1:2011 | Requirements for marking and manufacturer's instructions concerning mercury | ||||
| ISO 3909:1976 | Hardmetals -- Determination of cobalt -- Potentiometric method | ||||
| ISO 3923-2:1981 | Metallic powders -- Determination of apparent density -- Part 2: Scott volumeter method | ||||
| ISO 5925-1:2007/Amd 1:2015 | |||||
| ISO 5755:2012 | Sintered metal materials -- Specifications | ||||
| ISO 7625:1983 | Sintered metal materials, excluding hardmetals -- Preparation of samples for chemical analysis for determination of carbon content | ||||
| ISO 3351:1975 | Wood -- Determination of resistance to impact indentation | ||||
| ISO/DIS 13061-5 | Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 5: Determination of strength in compression perpendicular to grain | ||||
| ISO 3813:1977 | Cork -- Floor tiles of agglomerated cork -- Characteristics, sampling and packing | ||||
| ISO/CD 633 | Cork -- Vocabulary | ||||
| ISO 2245:1972 | Shaped insulating refractory products -- Classification | ||||
| ISO 5019-5:1984 | Refractory bricks -- Dimensions -- Part 5: Skewbacks | ||||
| ISO 5019-6:1984 | Refractory bricks -- Dimensions -- Part 6: Basic bricks for oxygen steel-making converters | ||||
| ISO 8656-1:1988 | Refractory products -- Sampling of raw materials and unshaped products -- Part 1: Sampling scheme | ||||
| ISO 5417:1986 | Refractory bricks for use in rotary kilns -- Dimensions | ||||
| ISO 8894-2:1990 | Refractory materials -- Determination of thermal conductivity -- Part 2: Hot-wire method (parallel) |
若您对上表中数据有任何疑问，请与网站联系。
