（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/TR 16576 | Fire safety engineering -- Examples of fire safety objectives, functional requirements and safety criteria | ||||
| ISO 6941:1984/Amd 1:1992 | |||||
| ISO/DTR 10093 | Plastics -- Fire tests -- Standard ignition sources | ||||
| ISO 10528:1995 | Textiles -- Commercial laundering procedure for textile fabrics prior to flammability testing | ||||
| ISO 11907-4:1998 | Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 4: Dynamic decomposition method using a conical radiant heater | ||||
| IEC 60695-11-10:1999/Amd 1:2003 | |||||
| ISO 1938-2:2017 | Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 2: Reference disk gauges | ||||
| ISO 5166:1982 | System of cone fits for cones from C = 1 : 3 to 1 : 500, lengths from 6 to 630 mm and diameters up to 500 mm | ||||
| ISO/CD 16610-29 | Geometrical product specifications (GPS) -- Filtration -- Part 29: Linear profile filters: Spline wavelets | ||||
| ISO 4797:2015 | Laboratory glassware -- Boiling flasks with conical ground joints | ||||
| ISO/TR 10220:1989 | Batteries for watches -- Leakage tests | ||||
| ISO 2975-6:1977 | Measurement of water flow in closed conduits -- Tracer methods -- Part 6: Transit time method using non-radioactive tracers | ||||
| ISO 2975-3:1976 | Measurement of water flow in closed conduits -- Tracer methods -- Part 3: Constant rate injection method using radioactive tracers | ||||
| ISO 7145:1982 | Determination of flowrate of fluids in closed conduits of circular cross-section -- Method of velocity measurement at one point of the cross-section | ||||
| ISO 11631:1998 | Measurement of fluid flow -- Methods of specifying flowmeter performance | ||||
| ISO 9951:1993/Cor 1:1994 | |||||
| ISO 10790:1994 | Measurement of fluid flow in closed conduits -- Coriolis mass flowmeters | ||||
| ISO/PRF 12764 | Measurement of fluid flow in closed conduits -- Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full | ||||
| ISO/DTR 15377 | Measurement of fluid flow by means of pressure-differential devices -- Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 | ||||
| ISO 8566-1:1992 | Cranes -- Cabins -- Part 1: General | ||||
| ISO 29764:2008 | Thermal insulating products for building applications -- Determination of deformation under specified compressive load and temperature conditions | ||||
| ISO 3454:2008 | Hydrometry -- Direct depth sounding and suspension equipment | ||||
| ISO 653:1980 | Long solid-stem thermometers for precision use | ||||
| ISO/R 1146:1969 | Pyrometric reference cones | ||||
| ISO 9334:2007 | Optics and photonics -- Optical transfer function -- Definitions and mathematical relationships | ||||
| ISO 13653:1996 | Optics and optical instruments -- General optical test methods -- Measurement of relative irradiance in the image field | ||||
| ISO 15529:2007 | Optics and photonics -- Optical transfer function -- Principles of measurement of modulation transfer function (MTF) of sampled imaging systems | ||||
| ISO 4796-1:2016 | Laboratory glassware -- Bottles -- Part 1: Screw-neck bottles | ||||
| ISO 4796-2:2000 | Laboratory glassware -- Bottles -- Part 2: Conical neck bottles | ||||
| ISO 10136-5:1993 | Glass and glassware -- Analysis of extract solutions -- Part 5: Determination of iron(III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry | ||||
| ISO 6144:1981 | Gas analysis -- Preparation of calibration gas mixtures -- Static volumetric methods | ||||
| ISO 6145-2:2014 | Gas analysis -- Preparation of calibration gas mixtures using dynamic methods -- Part 2: Piston pumps | ||||
| ISO 2338:1997 | Parallel pins, of unhardened steel and austenitic stainless steel | ||||
| ISO 5858:1991 | Aerospace -- Self-locking nuts with maximum operating temperature less than or equal to 425 degrees C -- Procurement specification | ||||
| ISO 12319:2006 | Aerospace -- 'P' (loop style) clamps -- Procurement specification | ||||
| ISO 13595:2000 | Aerospace -- Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated -- Dimensions | ||||
| ISO 4383:1981 | Plain bearings -- Metallic multilayer materials for thin-walled plain bearings | ||||
| ISO 18762:2016 | Tubes of titanium and titanium alloys -- Welded tubes for condensers and heat exchangers -- Technical delivery conditions | ||||
| ISO 8179:1985 | Ductile iron pipes -- External zinc coating | ||||
| ISO 8584-1:1990 | Thermoplastics pipes for industrial applications under pressure -- Determination of the chemical resistance factor and of the basic stress -- Part 1: Polyolefin pipes | ||||
| ISO/DIS 8779 | Plastics piping systems -- Polyethylene (PE) pipes for irrigation -- Specifications | ||||
| ISO 10928:1997 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use | ||||
| ISO 11922-1:1997 | Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 1: Metric series | ||||
| ISO 13957:1997 | Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance | ||||
| ISO 2785:1974 | Guide to the selection of asbestos-cement pipes subject to external loads with of without internal pressure | ||||
| ISO 5211-1:1977 | Part-turn valve actuator attachment -- Part 1: Flange dimensions | ||||
| ISO/R 2091:1971 | Withdrawal of ISO/R 2091-1971 | ||||
| ISO 7241-2:1986 | Hydraulic fluid power -- Quick-action couplings -- Part 2: Test methods | ||||
| ISO 1071:1983 | Covered electrodes for manual arc welding of cast iron -- Symbolization | ||||
| ISO/TS 10303-1103:2014 | Industrial automation systems and integration -- Product data representation and exchange -- Part 1103: Application module: Product class |
若您对上表中数据有任何疑问，请与网站联系。
