(清空日期可显示全部记录)
标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
---|---|---|---|---|---|
EN 13035-7-2006 | Machines And Plants For The Manufacture, Treatment And Processing Of Flat Glass - Safety Requirements - Part 7: Cutting Machines For Laminated Glass | 2006-06-01 | 2009-12-02 | ||
EN 13121-3-2008 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship Incorporates | 2010-02-24 | |||
EN 15316-2-1-2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems | 2007-07-25 | |||
EN 15316-3-1-2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-1: Domestic hot water systems, characterisation of needs (tapping requirements) | 2007-10-03 | |||
EN 15316-3-3-2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation | 2007-10-03 | |||
EN 15316-4-2-2008 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems | 2008-06-18 | |||
EN 15565-2008 | Tourism services - Requirements for the provision of professional tourist guide training and qualification programmes | 2008-03-12 | |||
EN 1645-2-2008 | Leisure Accommodation Vehicles - Caravans - Part 2: User Payload | 2008-06-01 | |||
EN 1993-1-2-2005 | Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design | 2005-04-20 | |||
EN 2349-409-2007 | Aerospace series - Requirements and test procedures for relays and contactors - Part 409: Ozone resistance | 2007-04-11 | |||
EN 2349-411-2007 | Aerospace series - Requirements and test procedures for relays and contactors - Part 411: Temperature change | 2007-04-11 | |||
EN 2349-413-2007 | Aerospace series - Requirements and test procedures for relays and contactors - Part 413: Vibration, sinusoidal and random | 2007-04-11 | |||
EN 2349-415-2007 | Aerospace series - Requirements and test procedures for relays and contactors - Part 415: Acceleration | ||||
EN 3162-2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa | 2007-08-22 | |||
EN 3630-2008 | Aerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes | 2008-04-09 | |||
EN 3733-006-2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 006: Receptacle, connector, jam nut fixing for cable according to EN 4532, product standard | 2008-04-09 | |||
EN 4630-2007 | Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa | 2007-12-19 | 2014-10-15 | ||
EN ISO 10601-2008 | Micaceous iron oxide pigments for paints - Specifications and test methods (ISO 10601:2007) | 2008-05-07 | |||
EN ISO 11844-1-2008 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity (ISO 11844-1:2006) | 2008-04-23 | |||
EN ISO 11844-3-2008 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006) | 2008-04-23 | |||
EN ISO 12732-2008 | Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006) | 2008-04-23 | |||
EN ISO 16784-1-2008 | Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems (ISO 16784-1:2006) | 2008-04-23 | |||
CLC/TR 50460-2005 | Cable Networks For Television Signals, Sound Signals And Interactive Services - System Guidelines For Analogue Optical Transmission Systems | 2005-08-01 | |||
CLC/TS 60034-20-1-2004 | Rotating Electrical Machines - Part 20-1: Control Motors - Stepping Motors | 2004-09-01 | |||
CR 13686-2001 | Packaging - Optimization Of Energy Recovery From Packaging Waste | 2001-04-01 | |||
EN 3-9-2006 | Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers | 2006-12-06 | |||
EN 40-2-2004 | Lighting columns - Part 2: General requirements and dimensions | 2004-10-06 | |||
EN 81-71-2005 | Safety Rules For The Construction And Installation Of Lifts - Particular Applications To Passenger Lifts And Goods Passenger Lifts - Part 71: Vandal Resistant Lifts | 2005-04-01 | 2006-12-13 | ||
EN 81-73-2005 | Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire | 2005-05-25 | |||
EN 88-1-2007 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar | 2007-11-14 | 2011-04-06 | ||
EN 89-1999 | Gas-fired storage water heaters for the production of domestic hot water | 1999-10-20 | 2015-05-13 | ||
EN 131-3-2007 | Ladders - Part 3: User Instructions | 2007-05-09 | |||
EN 263-2008 | Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes | 2008-02-27 | |||
EN 40-4-2005 | Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns | 2005-12-07 | |||
EN 54-5-2000 | Fire Detection and Fire Alarm Systems - Part 5: Heat Detectors - Point Detectors | ||||
EN 54-16-2008 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment | ||||
EN 54-18-2005 | Fire detection and fire alarm systems - Part 18: Input/output devices | ||||
EN 54-21-2006 | Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment | ||||
EN 81-1-1998 | Safety rules for the construction and installation of lifts Part 1: Electric lifts Incorporating Corrigendum September 1999; Includes Amendments A1:2005 and A2:2004; Remains Current | ||||
CEN/TS 15324-2008 | Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode | 2008-04-30 | |||
EN 378-4-2008 | Refrigerating Systems And Heat Pumps - Safety And Environmental Requirements - Part 4: Operation, Maintenance, Repair And Recovery | 2008-02-01 | 2012-05-23 | ||
EN 474-2-2006 | Earth-moving Machinery - Safety - Part 2: Requirements For Tractor-dozers | 2006-11-01 | 2008-10-01 | ||
EN 474-4-2006 | Earth-moving Machinery - Safety - Part 4: Requirements For Backhoe Loaders | 2006-11-01 | 2012-01-11 | ||
EN 474-6-2006 | Earth-moving Machinery - Safety - Part 6: Requirements For Dumpers | 2006-11-01 | 2009-02-11 | ||
EN 474-8-2006 | Earth-moving Machinery - Safety - Part 8: Requirements For Graders | 2006-11-01 | 2009-02-11 | ||
EN 474-10-2006 | Earth-moving Machinery - Safety - Part 10: Requirements For Trenchers | 2006-11-01 | 2009-02-11 | ||
EN 485-1-2008 | Aluminium And Aluminium Alloys - Sheet, Strip And Plate - Part 1: Technical Conditions For Inspection And Delivery | 2008-03-01 | 2009-10-28 | ||
EN 500-1-2006 | Mobile Road Construction Machinery - Safety - Part 1: Common Requirements | 2006-10-01 | 2009-12-02 | ||
EN 500-3-2006 | Mobile Road Construction Machinery - Safety - Part 3: Specific Requirements For Soil-stabilising Machines And Recycling Machines | 2006-10-01 | 2008-10-22 | ||
EN 500-6-2006 | Mobile Road Construction Machinery - Safety - Part 6: Specific Requirements For Paver-finishers | 2006-10-01 | 2008-10-08 |
若您对上表中数据有任何疑问,请与网站联系。