（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AIA/NAS NASM25420-2012 | FASTENERS, STRAIGHT, HEADED, SWAGED COLLAR, LIMITATIONS FOR USE OF Rev 1 [Superseded: DLA MS25420 REV B CANC NOTICE 1, DLA MS25420 REV B, DLA MS25420 REV A] | ||||
| AIA/NAS NASM20995-2012 | WIRE, SAFETY OR LOCK Rev 1 [Superseded: DLA MS20995 REV E CANC NOTICE 4, DLA MS20995 REV E NOTICE 3, DLA MS20995 REV E NOTICE 2, DLA MS20995 REV E VALID NOTICE 1, DLA MS20995 REV E, DLA MS20995 REV D, DLA MS20995 REV C, DLA MS20995 REV B, DLA MS2 | ||||
| AIA/NAS NASM21047-2012 | NUT, SELF-LOCKING, PLATE, TWO-LUG, LOW HEIGHT, STEEL, 125 KSI Ftu, 450 癋 Rev 3 [Superseded: DLA MS21047 REV F CANC NOTICE 1, DLA MS21047 REV F, DLA MS21047 REV E, DLA MS21047 REV D, DLA MS21047 REV C, DLA MS21047 REV A] | ||||
| AIA/NAS NASM21073-2012 | NUT, SELF-LOCKING, PLATE, CORNER, REDUCED RIVET SPACING, LOW HEIGHT, STEEL, 125 KSI Ftu, 450 癋 Rev 2 [Superseded: DLA MS21073 REV G CANC NOTICE 1, DLA MS21073 REV G, DLA MS21073 REV F, DLA MS21073 REV E, DLA MS21073 REV D, DLA MS21073 REV C] | ||||
| AIA/NAS NASM21095-2012 | BOLT, TENSION, HEX HEAD, SELF-LOCKING, 250 癋, CRES, 80 KSI Ftu, 48 KSI Fsu Rev 2 | ||||
| AIA/NAS NASM21130-2012 | BOLT, SELF-RETAINING, POSITIVE LOCKING, CRES, 90 KSI Fsu, 63 KSI Ftu, 100?FLUSH HEAD, 450 癋& 650 癋 Rev 2 [Superseded: DLA MS21130 REV E CANC NOTICE 1, DLA MS21130 REV E, DLA MS21130 REV D, DLA MS21130 REV C, DLA MS21130 REV B] | ||||
| AIA/NAS NASM21258-2012 | WASHER, KEY, RETAINING, WHEEL BEARING Rev 2 [Superseded: DLA MS21258 REV A CANC NOTICE 1, DLA MS21258 REV A, DLA MS21258] | ||||
| AIA/NAS NASM21318-2012 | SCREW, DRIVE, ROUND HEAD, TYPE U, STEEL, CARBON, CADMIUM PLATED Rev 1 [Superseded: DLA MS21318 REV A CANC NOTICE 2, DLA MS21318 REV A VALID NOTICE 1, DLA MS21318 REV A] | ||||
| AIA/NAS NASM24630-2012 | SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T, PAN HEAD, CRUCIFORM RECESSED, CRES Rev 1 [Superseded: DLA MS24630 REV C CANC NOTICE 3, DLA MS24630 REV C VALID NOTICE 2, DLA MS24630 REV C VALID NOTICE 1, DLA MS24630 REV C, DLA MS24630 REV B, DLA | ||||
| AIA/NAS NASM35214-2012 | SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, BRASS, UNC-2A Rev 2 [Superseded: DLA MS35214 REV D CANC NOTICE 1, DLA MS35214 REV D (1), DLA MS35214 REV D, DLA MS35214 REV C, DLA MS35214 REV B, DLA MS35214 REV A, DLA MS35214] | ||||
| AIA/NAS NASM35215-2012 | SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, BRASS, UNF-2A Rev 2 [Superseded: DLA MS35215 REV C CANC NOTICE 1, DLA MS35215 REV C (1), DLA MS35215 REV C, DLA MS35215 REV B, DLA MS35215] | ||||
| AIA/NAS NASM35677-2012 | PIN, GROOVED, HEADLESS, LONGITUDINAL CENTER GROOVE, CARBON STEEL Rev 1 [Superseded: DLA MS35677 REV A CANC NOTICE 2, DLA MS35677 REV A VALID NOTICE 1, DLA MS35677 REV A, DLA MS35677] | ||||
| AIA/NAS NASM35792-2012 | HANDLE, BAIL, CHEST, RECESSED Rev 1 [Superseded: DLA MS35792 REV B CANC NOTICE 1, DLA MS35792 REV B, DLA MS35792] | ||||
| AIA/NAS NASM43770-2012 | SNAP HOOKS, GENERAL SPECIFICATION FOR Rev 1 [Superseded: DLA MIL-S-43770 CANC NOTICE 1, DLA MIL-S-43770 (3), DLA MIL-S-43770 (2), DLA MIL-S-43770 (1), DLA MIL-S-43770 SUPP 1, DLA MIL-S-43770] | ||||
| AIA/NAS NASM43770/3-2012 | SNAP HOOKS, CAST BODY, FIXED LOOP EYE WITH ROLLER, FLAT SPRING CLOSURE, NARROW MOUTH Rev 1 [Superseded: DLA MIL-S-43770/3 CANC NOTICE 3, DLA MIL-S-43770/3 CANC NOTICE 2, DLA MIL-S-43770/3 VALID NOTICE 1, DLA MIL-S-43770/3] | ||||
| AIA/NAS NASM43770/13-2012 | SNAP HOOK, CAST BODY, FIXED LOOP EYE, W/O ROLLER, FLAT SPRING CLOSURE, NARROW MOUTH Rev 1 [Superseded: DLA MIL-S-43770/13 CANC NOTICE 3, DLA MIL-S-43770/13 CANC NOTICE 2, DLA MIL-S-43770/13 VALID NOTICE 1, DLA MIL-S-43770/13] | ||||
| AIA/NAS NASM43770/14-2012 | SNAP HOOK, CAST BODY, OPEN EYE, SLIDING BOLT CLOSURE Rev 1 [Superseded: DLA MIL-S-43770/14 CANC NOTICE 3, DLA MIL-S-43770/14 CANC NOTICE 2, DLA MIL-S-43770/14 VALID NOTICE 1, DLA MIL-S-43770/14] | ||||
| AIA/NAS NASM45595/6-2012 | WASHER, CONVEX, STEEL, ALLOY Rev 1 [Superseded: DLA MIL-W-45595/6 CANC NOTICE 1, DLA MIL-W-45595/6] | ||||
| AIA/NAS NASM45595/9-2012 | WASHER, SHOULDERED, GLASS FILLED NYLON Rev 1 [Superseded: DLA MIL-W-45595/9 CANC NOTICE 2, DLA MIL-W-45595/9 NOTICE 1, DLA MIL-W-45595/9] | ||||
| AIA/NAS NASM45938/1-2012 | NUT, PLAIN, CLINCH (SELF-CLINCHING, ROUND) Rev 2 [Superseded: DLA MIL-N-45938/1 B CANC NOTICE 1, DLA MIL-N-45938/1 B (1), DLA MIL-N-45938/1 B, DLA MIL-N-45938/1 A, DLA MIL-N-45938/1] | ||||
| AIA/NAS NASM51605-2012 | PIN, GROOVED, HEADLESS, HALF LENGTH TAPER GROOVE, CRES Rev 1 [Superseded: DLA MS51605 REV B CANC NOTICE 2, DLA MS51605 REV B VALID NOTICE 1, DLA MS51605 REV B, DLA MS51605 REV A, DLA MS51605] | ||||
| AIA/NAS NASM51923-2012 | PIN, SPRING, TUBULAR, COILED, STANDARD DUTY Rev 1 [Superseded: DLA MS51923 REV C CANC NOTICE 1, DLA MS51923 REV C VALID NOTICE 1, DLA MS51923 REV C, DLA MS51923 REV B] | ||||
| AIA/NAS NASM51987-2012 | PIN, SPRING, TUBULAR, COILED, LIGHT DUTY Rev 1 [Superseded: DLA MS51987 REV A CANC NOTICE 1, DLA MS51987 REV A VALID NOTICE 1, DLA MS51987 REV A, DLA MS51987] | ||||
| AIA/NAS NASM63540/1-2012 | STUD, SELF-LOCKING, FLUSH HEAD, RIBBED CLINCH TYPE Rev 1 [Superseded: DLA MIL-S-63540/1 A CANC NOTICE 1, DLA MIL-S-63540/1 A (3), DLA MIL-S-63540/1 A (2), DLA MIL-S-63540/1 A (1), DLA MIL-S-63540/1 A, DLA MIL-S-63540/1] | ||||
| AIA/NAS NAS994-2012 | ADAPTIVE CONTROL SYSTEM FOR NUMERICALLY CONTROLLED MILLING MACHINES Rev 1 | ||||
| AIA/NAS NAS996-2012 | INDUCTION TUBE BRAZING EQUIPMENT Rev 1 | ||||
| AIA/NAS NASM45938/7-2012 | NUT, PLAIN CLINCH AND NUT, SELF-LOCKING CLINCH (KNURLED COLLAR, MINIATURE, 450 癋) Rev 2 [Superseded: DLA MIL-N-45938/7 C CANC NOTICE 1, DLA MIL-N-45938/7 C, DLA MIL-N-45938/7 B, DLA MIL-N-45938/7 A, DLA MIL-N-45938/7] | ||||
| AIA/NAS NASM47195-2012 | RIVETS, BLIND, SELF-PLUGGING, PREPARATION FOR AND INSTALLATION OF Rev 1 [Superseded: DLA MIL-R-47195 A CANC NOTICE 2, DLA MIL-R-47195 A VALID NOTICE 1, DLA MIL-R-47195 A, DLA MIL-R-47195] | ||||
| AIA/NAS NASM33749-2012 | SCREW, INSTALLATION AND LIMITATIONS FOR USAGE OF THREAD CUTTING AND THREAD FORMING Rev 1 [Superseded: DLA MS33749 CANC NOTICE 2, DLA MS33749 VALID NOTICE 1, DLA MS33749] | ||||
| AIA/NAS NASM63540/6-2012 | STUD, SELF-LOCKING, NON-FLUSH, RIBBED CLINCH TYPE Rev 1 [Superseded: DLA MIL-S-63540/6 NOTICE 1, DLA MIL-S-63540/6] | ||||
| AIA/NAS NASM81177/3-2012 | FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED, THREADED, SELF-LOCKING, PROTRUDING HEAD, 450 癋, ALLOY STEEL, 112 KSI Fsu Rev 1 [Superseded: DLA MIL-F-81177/3 CANC NOTICE 2, DLA MIL-F-81177/3 VALID NOTICE 1, DLA MIL-F-81177/3] | ||||
| AIA/NAS NASM85353-2012 | NUTS, FASTENERS, INTERNALLY THREADED, PRELOAD LOCKING, 450 癋, 800 癋 AND 1,200 癋, GENERAL SPECIFICATION FOR Rev 1 [Superseded: DLA MIL-N-85353 CANC NOTICE 1, DLA MIL-N-85353 (1), DLA MIL-N-85353] | ||||
| AIA/NAS NASM90354-2012 | FASTENER, BLIND, HIGH STRENGTH, PULL TYPE, POSITIVE MECHANICAL LOCK, PROTRUDING HEAD, ALLOY STEEL, 112 KSI Fsu Rev 2 [Superseded: DLA MS90354 REV T CANC NOTICE 1, DLA MS90354 REV T (1), DLA MS90354 REV T, DLA MS90354 REV R, DLA MS90354 REV P, DLA MS | ||||
| AIA/NAS NASM90726-2012 | SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, GRADE 5, CADMIUM PLATED, UNF-2A Rev 2 [Superseded: DLA MS90726 REV B CANC NOTICE 1, DLA MS90726 REV B (2), DLA MS90726 REV B (1), DLA MS90726 REV B VALID NOTICE 1, DLA MS90726 REV B] | ||||
| AIA/NAS NA0064-0066-2012 | NUT, THIN, WITH OPTIONAL LOCKWIRE HOLE, METRIC Rev 2 | ||||
| AIA/NAS NA0069-2012 | SCREWS, CAP, HEXAGON SOCKET HEAD, FULL THREAD A-286, 1100 MPa, METRIC Rev 7 | ||||
| AIA/NAS NA0078-2012 | NUT, SELF-LOCKING, PLATE, FIXED, ONE LUG, CRES, REDUCED RIVET SPACING, LOW HEIGHT, CBORE, 900 MPa, METRIC, 235 癈 AND 425 癈 Rev 3 | ||||
| AIA/NAS NA0082-2012 | NUT, SELF-LOCKING, PLATE, FIXED, CORNER, CRES, REDUCED RIVET SPACING, LOW HEIGHT, CBORE, 900 MPa, METRIC 235 癈 AND 425 癈 Rev 3 | ||||
| AIA/NAS NA0090-2012 | SCREW, PAN HEAD, OFFSET CRUCIFORM RECESS, FULL THREAD, TITANIUM ALLOY, 1100 MPa, METRIC Rev 2 | ||||
| AIA/NAS NA0125-2012 | SCREW, CLOSE TOLERANCE, 100?REDUCED CROWN HEAD, OFFSET CRUCIFORM RECESS, TITANIUM, 660 MPa SHEAR, METRIC Rev 6 | ||||
| AIA/NAS NA0160-2012 | SCREW, FAIRING WASHER, ASSEMBLY, 6Al-4V TITANIUM ALLOY, OFFSET CRUCIFORM RECESS, FULL THREAD, 1100 MPa TENSILE, METRIC Rev 3 | ||||
| AIA/NAS NA0231-0233-2012 | SPACER, STEPPED, SWAGE TYPE, METRIC Rev 1 | ||||
| AIA/NAS NA0244-2012 | INSERT, SANDWICH PANEL, MOLDED IN, BLIND THREADED, SELF-LOCKING, ALUM/STEEL, FLOATING, METRIC Rev 1 | ||||
| AIA/NAS NA0245-2012 | INSERT, SANDWICH PANEL, MOLDED IN, BLIND THREADED, SELF-LOCKING, CRES/CRES, FLOATING, METRIC Rev 1 | ||||
| AIA/NAS NAM1312-107-2012 | FASTENER TEST METHODS, METRIC METHOD 107 VIBRATION Rev 1 [Superseded: NAVY DOD-STD-1312-107 CANC NOTICE 1, NAVY DOD-STD-1312 -107] | ||||
| AIA/NAS NAS121-2012 | KNOB, CONTROL, 1 INCH SPHERICAL Rev 6 | ||||
| AIA/NAS NAS129-2012 | DATA, STANDARD KNOB, ENGINEERING REFERENCE Rev 4 | ||||
| AIA/NAS 198-2012 Revision 4 | Knob, Control, 1.25 Spherical, Plastic | 2012-08-31 | |||
| AIA/NAS NAS358-2012 | TUBE ASSEMBLY, CONTROL, STEEL, WITH WELDED THREADED ROD-ENDS Rev 7 | ||||
| AIA/NAS NAS878-2012 | MOUNT ?OPTICAL TOOLING 3-1/2 - 8 THREAD Rev 1 |
若您对上表中数据有任何疑问，请与网站联系。
