（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| SAE AS 5176B-2007 | Fitting, Sleeve, Flared | 2007-07-17 | |||
| SAE AS 5176A-2001 | Fitting, Sleeve, Flared | 2001-12-14 | |||
| 重庆市人民代表大会常务委员会公告〔2015〕第22号 | 重庆市河道管理条例 | 2015-07-30 | 2015-10-01 | ||
| SAE AS 5176-1999 | Fitting, Sleeve, Flared | 1999-01-01 | |||
| EN ISO 8624:1996 | Optics and optical instruments - Ophthalmic optics - Measuring system for spectacle frames (ISO 8624:1991) | 1996-06-19 | |||
| IEC TS 62749:2015 | Assessment of power quality - Characteristics of electricity supplied by public networks | 2015-04-09 | |||
| SAE AMS 4510G-2009 | Phosphor Bronze, Sheet, Strip, and Plate 94.5Cu 4.0Sn 0.19P Spring Temper (H08) | 2009-06-11 | |||
| SAE AMS 4510F-1994 | Phosphor Bronze, Sheet, Strip, and Plate 94.5Cu 4.0Sn 0.19P Spring Temper (H08) | 1994-07-01 | |||
| AIA/NAS NASM 18063-1998 | Setscrew, Hexagon Socket, Cup Point, 250 Degree F Self Locking Element, Alloy Steel, Cadmium Plated | 1998-04-01 | |||
| SAE AMS 4510E-1989 | Phosphor Bronze, Sheet, Strip, and Plate 94.5Cu 4.0Sn 0.19P Spring Temper (H08) | 1989-07-01 | |||
| 重庆市人民代表大会常务委员会公告公告〔2015〕第15号 | 重庆市村镇规划建设管理条例 | 2015-05-28 | 2015-10-01 | ||
| SAE AS 1734B-1993 | Nut, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I | 1993-09-01 | |||
| SAE AMS 4510D-1977 | Phosphor Bronze, Sheet, Strip, and Plate 94.5Cu 4.0Sn 0.19P Spring Temper (H08) | 1977-07-15 | |||
| SAE AMS 4510C-1951 | Phosphor Bronze, Sheet, Strip, and Plate 94.5Cu 4.0Sn 0.19P Spring Temper (H08) | 1951-03-01 | |||
| AIA/NAS NASM 21025-2000 | Nut, Castellated, Hexagon | 2000-03-31 | |||
| SAE AS 1734A-1991 | Nut, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I | 1991-10-01 | |||
| SAE AS 1734-1984 | Nut, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I | 1984-01-01 | |||
| SAE AMS 4510B-1946 | Phosphor Bronze, Sheet, Strip, and Plate 94.5Cu 4.0Sn 0.19P Spring Temper (H08) | 1946-11-01 | |||
| AIA/NAS NASM 21053-2002 Revision 1 | Nut, Self-locking, Plate, One Lug, 100 Degree Csk, Low Height, Alloy Steel, 125 Ksi Ftu, 450 Degrees F | 2002-08-01 | |||
| 重庆市人民代表大会常务委员会公告〔2015〕第14号 | 重庆市水资源管理条例 | 2015-05-28 | 2015-10-01 | ||
| SAE ARP 4404A-2002 | Aircraft Electrical Installations | 2002-07-15 | |||
| SAE ARP 4404-1992 | Aircraft Electrical Installations | 1992-03-23 | |||
| SAE AMS 3306B-2007 | Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65 | 2007-03-07 | |||
| AIA/NAS NASM 1312-28-1997 | Fastener Test Methods - Method 28, Elevated Temperature Double Shear | 1997-08-01 | |||
| SAE AMS 3306A-1995 | Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65 | 1995-04-01 | |||
| SAE AMS 3306-1986 | Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65 | 1986-10-01 | |||
| EN 2694:1993 | Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip 0,4 mm <= a <= 6 mm | 1993-12-22 | 2005-06-22 | ||
| AIA/NAS NASM 1312-30-1997 | Fastener Test Methods - Methods 30, Sheet Pull-up Of Blind Fasteners | 1997-08-01 | |||
| EN ISO 20783-1:2003 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - part 1: Fluids in category HFAE (ISO 20783-1:2003) | 2003-12-15 | |||
| SAE AMS 3901/2C-1998 | Yarn, Organic Fiber (Para-Aramid), High Modulus Oy 390 (2689)/23.8 Tensile Strength, 17.5 (121)/950 Tensile Modulus 380 Denier,(420 D Tex), 0.6% Finish | 1998-08-01 | |||
| EN 2696:1993 | Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip 0,4 mm <= a <= 6 mm | 1993-12-22 | 2005-06-22 | ||
| 重庆市人民代表大会常务委员会公告公告〔2015〕第13号 | 重庆市志愿服务条例 | 2015-05-28 | 2015-10-01 | ||
| SAE AMS 3374/1-1996 | Sealing Compound, One-Part Silicone (Type 1) Aircraft Firewall | 1996-11-01 | |||
| SAE AMS 3901/2B-1992 | Yarn, Organic Fiber (Para-Aramid), High Modulus, 380 Denier,(420 d tex), 0.6% Finish | 1992-10-01 | |||
| AIA/NAS NASM 3926/2-2001 | Knob, Control, Oval Tapered | 2001-08-01 | |||
| EN 12873-1:2014 | Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials | 2014-07-02 | |||
| SAE AMS 3797/12B-1994 | Webbing, Nylon, Integral Locking Slots, 1-1/8 (28) Wide, 12,000 (53,379) Breaking Strength | 1994-03-01 | |||
| SAE AMS 3797/12A-1989 | Webbing, Nylon, Integral Locking Slots, 1-1/8 (28) Wide, 12,000 (53,379) Breaking Strength | 1989-01-01 | |||
| SAE AMS 5912A-2006 | Steel, Corrosion Resistant, Sheet and Strip, 19Cr - 9.2Ni (SAE 30304), Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength | 2006-04-20 | |||
| SAE AMS 3797/12-1983 | Webbing, Nylon, Integral Locking Slots, 1-1/8 (28) Wide, 12,000 (53,379) Breaking Strength | 1983-10-01 | |||
| 重庆市人民代表大会常务委员会公告〔2015〕第7号 | 重庆市公路管理条例 | 2015-04-01 | 2015-07-01 | ||
| AIA/NAS NASM 7874-2012 Revision 1 | Bolt, Machine, 1,200 Degrees F | 2012-03-30 | |||
| SAE AMS 5912-1992 | Steel Sheet and Strip, Corrosion Resistant 19Cr - 9.2Ni 9SAE 30304) Cold Rolled, 175 ksi (1207 MPa) Tensile Strength | 1992-01-01 | |||
| AIA/NAS NASM 7874-2000 | Bolt, Machine, 1200 Degrees F | 2000-03-01 | |||
| SAE J 626-1988 | Diesel Fuel Injection End-Mounting Flanges for Fuel Injection Pumps | 1988-06-01 | |||
| EN ISO 14341:2008 | Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2002) | 2008-05-07 | |||
| EN 440:1994 | Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification | 1994-09-30 | |||
| AIA/NAS NASM 14214-1999 | Nut Element, Attached Retention Element (a.r.e.), 450 Degree F, Steel (aisi 1050 Or 4130), 125 Ksi Ftu | 1999-09-01 | |||
| AIA/NAS NASM 21075-2001 Revision 1 | Nut, Self-locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, Steel, 125 Ksi Ftu, 450 Degree F | 2001-02-01 | |||
| SAE J 1194-1999 | Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors | 1999-11-22 |
若您对上表中数据有任何疑问，请与网站联系。
