（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| SAE AMS 4783B-1985 | Cobalt Alloy, High Temperature Brazing Filler Metal, 50Co 8.0Si 19Cr 17Ni 4.0W 0.80B, 2050-2100°F (1121-1149°C) Solidus-Liquidus Range | 1985-07-01 | |||
| SAE AMS 4783A-1978 | Cobalt Alloy, High Temperature Brazing Filler Metal, 50Co 8.0Si 19Cr 17Ni 4.0W 0.80B, 2050-2100°F (1121-1149°C) Solidus-Liquidus Range | 1978-07-15 | |||
| SAE AMS 4783-1971 | Cobalt Alloy, High Temperature Brazing Filler Metal, 50Co 8.0Si 19Cr 17Ni 4.0W 0.80B, 2050-2100°F (1121-1149°C) Solidus-Liquidus Range | 1971-05-15 | |||
| 南昌市水资源条例 | 2015-03-26 | 2015-06-01 | |||
| SAE AMS 2801A-1994 | Heat Treatment of Titanium Alloy Parts | 1994-09-01 | |||
| SAE AMS 2801-1990 | Heat Treatment of Titanium Alloy Parts | 1990-07-01 | |||
| 郑州市大气污染防治条例(2014年修正) | 2014-12-04 | 2015-03-01 | |||
| SAE AMS 4190H-2008 | Aluminum Alloy, Welding Wire, 5.2Si (4043) | 2008-01-16 | |||
| SAE AMS 4190F-1996 | Aluminum Alloy, Welding Wire 5.2si | 1996-07-01 | |||
| SAE AMS 4190E-1996 | Aluminum Alloy, Welding Wire 5.2Si (4043) | 1996-05-01 | |||
| 西宁市城乡规划管理条例 | 2015-07-24 | 2015-09-01 | |||
| 西宁市餐厨垃圾管理条例(2015年修正) | 2015-03-27 | 2015-03-27 | |||
| 西宁市餐厨垃圾管理条例(2009年版) | 2009-06-09 | 2009-11-01 | 2015-03-27 | ||
| 关于对云南省工程建设地方标准《云南省建筑节能检测技术标准》(征求意见稿)征求意见的函 | 2015-10-22 | 2015-10-22 | 2015-12-22 | ||
| SAE AS 5973A-2014 | FITTING ASSEMBLY, CROSS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | 2014-12-31 | |||
| SAE AMS 5822C-2000 | Steel, Corrosion and Heat Resistant, Welding Wire 11.8cr 2.8ni 1.6co 1.8mo 0.32v Vacuum Induction Melted | 2000-06-01 | |||
| SAE AMS 5822B-1993 | Steel, Corrosion and Heat Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted | 1993-01-01 | |||
| SAE AMS 5822A-1991 | Steel, Corrosion and Heat Resistant, Welding Wire 11.8cr 2.8ni 1.6co 1.8mo 0.32v Vacuum Induction Melted | 1991-07-01 | |||
| SAE AMS 5822-1985 | Steel, Corrosion and Heat Resistant, Welding Wire 11.8cr 2.8ni 1.6co 1.8mo 0.32v Vacuum Induction Melted | 1985-10-01 | |||
| SAE AMS 4382C-1995 | Magnesium Alloy, Plate, Extra Flat 3.0al 1.0zn 0.20mn, Annealed | 1995-05-01 | |||
| SAE AMS 4382B-1984 | Magnesium Alloy, Plate, Extra Flat, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0), Annealed | 1984-07-01 | |||
| SAE AMS 4382A-1978 | Magnesium Alloy, Plate, Extra Flat, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0), Annealed | 1978-07-15 | |||
| SAE AMS 4382-1969 | Magnesium Alloy, Plate, Extra Flat, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0), Annealed | 1969-05-01 | |||
| SAE AMS 4123G-1999 | Aluminum Alloy, Rolled Or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated | 1999-04-01 | |||
| SAE AMS 4123F-1994 | Aluminum Alloy, Rolled or Cold Finished Bars and Rods 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651) Solution and Precipitation Heat Treated | 1994-04-01 | |||
| SAE AMS 4123E-1987 | Aluminum Alloy, Rolled Or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated | 1987-01-01 | |||
| SAE AMS 4123D-1968 | Aluminum Alloy, Rolled Or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated | 1968-05-01 | |||
| SAE AMS 4123C-1966 | Aluminum Alloy, Rolled Or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated | 1966-09-01 | |||
| SAE AMS 4123B-1965 | Aluminum Alloy, Rolled Or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated | 1965-02-01 | |||
| SAE AMS 4123A-1960 | Aluminum Alloy, Rolled Or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated | 1960-11-01 | |||
| SAE AMS 4123-1960 | Aluminum Alloy, Rolled Or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated | 1960-06-01 | |||
| SAE AMS 2980/2B-2014 | Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 2 - Qualification Program | 2014-04-09 | |||
| SAE AMS 2980/2-1996 | Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 2 - Qualification Program | 1996-11-01 | |||
| SAE J 1804-1987 | Corrosion Preventive Compound, Topside Vehicle Corrosion Protection | 1987-06-01 | |||
| SAE MA 3429A-2014 | NUT, SELF LOCKING, SPLINE DRIVE, EXTENDED WASHER, UNS N07001, SILVER PLATE, MJ THREAD, METRIC | 2014-12-08 | |||
| SAE AMS 5835B-1995 | Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 72Ni - 3.2Mn - 20Cr - 2.5Cb - 0.48Ti, Vacuum Induction Melted, Environmental Controlled Packaging | 1995-12-01 | |||
| SAE AMS 5835A-1990 | Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 72Ni - 3.2Mn - 20Cr - 2.5Cb - 0.48Ti, Vacuum Induction Melted, Environmental Controlled Packaging | 1990-01-01 | |||
| SAE AMS 5835-1984 | Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 72Ni - 3.2Mn - 20Cr - 2.5Cb - 0.48Ti, Vacuum Induction Melted, Environmental Controlled Packaging | 1984-07-01 | |||
| SAE J 2605-2015 | Non-Contact Hose Measurement Study 1 | 2015-04-21 | |||
| SAE J 2605-2001 | Non-Contact Hose Measurement Study 1 | 2001-08-06 | |||
| SAE J 2593-2015 | Information Report for the Installation of Fluid Conductors and Connectors | 2015-02-26 | |||
| SAE J 2593-2004 | Information Report for the Installation of Fluid Conductors and Connectors | 2004-10-25 | |||
| SAE AMS 7705F-2010 | Nickel-Iron Magnetic Alloy, Bars and Forgings | 2010-12-13 | |||
| SAE AMS 7705D-2000 | Nickel-Iron Magnetic Alloy, Bars and Forgings | 2000-09-01 | |||
| SAE AMS 7705C-1993 | Nickel-Iron Magnetic Alloy, Bars and Forgings | 1993-10-01 | |||
| SAE AMS 7705B-1988 | Nickel-Iron Magnetic Alloy, Bars and Forgings | 1988-01-01 | |||
| SAE AMS 7705A-1977 | Nickel-Iron Magnetic Alloy, Bars and Forgings | 1977-01-01 | |||
| SAE AMS 7705-1957 | Nickel-Iron Magnetic Alloy, Bars and Forgings | 1957-07-01 | |||
| SAE ARP 5647A-2014 | High Intensity Discharge Light Sources | 2014-04-03 | |||
| SAE ARP 5607-2002 | Legibility of Print on Aerospace Wires and Cables | 2002-03-01 |
若您对上表中数据有任何疑问，请与网站联系。
