（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| MIL-STD-1430 (NOTICE 1) | MILITARY STANDARD: SPECTACLES, INDUSTRIAL (19 JUN 1986) [S/S BY A-A-1995 & ANSI-Z-87.1] | ||||
| MIL-STD-751A | MILITARY STANDARD: RADAR OUTPUTS, NAVAL SHIP AND SHORE (03-SEP-1987) | ||||
| MIL-H-17902F | MILITARY SPECIFICATION: HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS (22-DEC-1988) [S/S BY MIL-DTL-17902G] | ||||
| MIL-PRF-32514 | PERFORMANCE SPECIFICATION: INSULATION, ANTI-SWEAT, REFRIGERANT, AND THERMAL FOAM (12-JUN-2015) | ||||
| MIL-DTL-5624T | DETAIL SPECIFICATION: TURBINE FUEL, AVIATION, GRADES JP-4 and JP-5 (18 SEP 1998) [SUPERSEDING MIL-DTL-5624T, MIL-PRF-5624S & MIL-T-5624R] | ||||
| MIL-PRF-2105E (NOTICE 2) | PERFORMANCE SPECIFICATION: LUBRICATING OIL, GEAR, MULTIPURPOSE (16 FEB 2005) [SUPERSEDING MIL-L-2105D] [S/S BY SAE-J2360] | ||||
| MIL-M-14H (NOTICE 1) | MILITARY SPECIFICATION: MOLDING PLASTICS AND MOLDED PLASTIC PARTS, THERMOSETTING (11 OCT 1996) [S/S BY ASTM D5948-96] | ||||
| MIL-F-14256F (AMENDMENT 1) | MILITARY SPECIFICATION: FLUX, SOLDERING, LIQUID, PASTE FLUX, SOLDER PASTE AND SOLDER-PASTE FLUX, (FOR ELECTRONIC/ELECTRICA | ||||
| MIL-STD-1212A (NOTICE 1) | MILITARY STANDARD: INDUSTRIAL SAFETY BELTS, STRAPS, AND RELATED EQUIPMENT (05 DEC 1995) [NO S/S DOCUMENT] | ||||
| MIL-H-8446B (NOTICE-1) | MILITARY SPECIFICATION: HYDRAULIC FLUID, NON-PETROLEUM BASE, AIRCRAFT (13-JUN-1978) [NO S/S DOCUMENT] | ||||
| MIL-STD-2098 (NOTICE 1) | MILITARY STANDARD: ORDNANCE PREPARATION AND APPLICATION OF INTUMESCENT SHEET, TYPE III (30 SEP 1999 | ||||
| MIL-HDBK-1013/5 (NOTICE 1) | DEPARTMENT OF DEFENSE HANDBOOK: STEEL-PLY WALL HARDENING SELECTION AND INSTALLATION (09 MAY 1997) [NO S/S DOCUMENT] | ||||
| MIL-I-17244E | MILITARY SPECIFICATION: INDICATORS, TEMPERATURE, DIRECT-READING, BIMETALLIC, (3 AND 5 INCH DIAL) (20 APR 1971) | ||||
| MIL-HDBK-138B | DEPARTMENT OF DEFENSE HANDBOOK: GUIDE TO CONTAINER INSPECTION FOR COMMERCIAL AND MILITARY INTERMODAL CONTAINERS (01 JAN 2002) | ||||
| MIL-STD-904A (NOTICE 1) | MILITARY STANDARD: GUIDELINES FOR DETECTION, EVALUATION, AND PREVENTION OF PEST INFESTATION OF SUBSISTENCE (16 SEPT 1998) | ||||
| MIL-PRF-21260E | PERFORMANCE SPECIFICATION: LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE BREAK-IN (31-JUL-1998) [SUPERSEDING MIL-L-21260D] | ||||
| MIL-STD-859A (NOTICE 2) | MILITARY STANDARD: STANDARD CALIBRATION TABLE FOR AERONAUTICAL PRESSURE MEASURING EQUIPMENT (20 SEPT 1995) | ||||
| MIL-C-3133C (NOTICE 1) | MILITARY SPECIFICATION: CELLULAR ELASTOMERIC MATERIALS, MOLDED OR FABRICATED (17-MAY-1984) [S/S by ASTM-D1056] | ||||
| MIL-HDBK-1791 | DEPARTMENT OF DEFENSE HANDBOOK: DESIGNING FOR INTERNAL AERIAL DELIVERY IN FIXED WING AIRCRAFT (17 FEB 1997) (SUPERSEDES MIL-STD-1791) | ||||
| MIL-STD-1625C (NOTICE 1) | MILITARY STANDARD: SAFETY CERTIFICATION PROGRAM (SCP) FOR DRYDOCKING FACILITIES AND SHIPBUILDING WAYS FOR US NAVY SHIPS (30 DEC 1992) | ||||
| MIL-V-25023B | MILITARY SPECIFICATION: VALVE, FUEL DRAIN, SELF-LOCKING (17-AUG-1967) | ||||
| MIL-HDBK-103AH | DEPARTMENT OF DEFENSE HANDBOOK: LIST OF STANDARD MICROCIRCUIT DRAWINGS (28-MAR-2011) | ||||
| MIL-STD-1179D (NOTICE 1) | MILITARY STANDARD: LAMPS, REFLECTORS AND ASSOCIATED SIGNALING EQUIPMENT FOR MILITARY VEHICLES (15 JUL 1987) | ||||
| MIL-STD-1500A (NOTICE 1) | MILITARY STANDARD: CADMIUM-TITANIUM PLATING, LOW EMBRITTLEMENT ELECTRO-DEPOSITION (24 AUG 1983) [NO S/S DOCUMENT] | ||||
| MIL-R-5001B (NOTICE 1) | MILITARY SPECIFICATION: RUBBER CELLULAR SHEET, MOLDED AND HAND-BUILT SHAPES; LATEX FOAM (18 DEC 1998) [S/S BY SAE-AMS-R-5001] | ||||
| MIL-STD-1678/2 (W/ CHANGE 2) | DEPARTMENT OF DEFENSE STANDARD PRACTICE: FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (PART 2: OPTICAL MEASUREMENTS) (PART 2 OF 6 PARTS) (24-AUG-2012) | ||||
| MIL-R-27521A (AMENDMENT-1) | MILITARY SPECIFICATION: RECEPTACLE, FLYING BOOM, AERIAL REFUELING, GENERAL SPECIFICATION FOR (03-APR-1983) | ||||
| MIL-STD-1761 (NOTICE-1) | MILITARY STANDARD: FASTENER RECESS TEST, METHOD FOR DAMAGE TOLERANCE EVALUATION (30-SEP-1988) [NO S/S DOCUMENT] | ||||
| MIL-H-502B (INTERIM AMENDMENT-1) | MILITARY SPECIFICATION: HEXAMETHYLENETETRAMINE, TECHNICAL (20-MAR-1990) | ||||
| MIL-PRF-83990A | PERFORMANCE SPECIFICATION, OVEN, THERMAL DRYING, ELECTRIC (24 FEB 1997) [SUPERSEDING MIL-O-83990] | ||||
| MIL-P-12235 (AMENDMENT 1) | MILITARY SPECIFICATION: PROJECTILE, PLATE-PROOFING (FOR IMPACT OR SHOCK TESTING) 37mm M1000, 57mm M1001, 75mm M1002, 90mm M1003, 105mm M1004 (08 NOV 1954) [S/S BY MIL-DTL-12235A] | ||||
| MIL-HDBK-236T | MILITARY STANDARDIZATION HANDBOOK: INDEX TO STANDARDS FOR PALLETIZING, TRUCK LOADING, RAILCAR LOADING AND CONTAINER LOADING OF HAZARDOUS MATERIALS (04 APR 1983) | ||||
| MIL-M-7969C (NOTICE 1) | MILITARY SPECIFICATION: MOTORS, ALTERNATING CURRENT, 400-CYCLE, 115/200-VOLT SYSTEM, AIRCRAFT, GENERAL SPECIFICATION FOR (28 AUG 1996) [NO S/S DOCUMENT] | ||||
| MIL-R-24337A | MILITARY SPECIFICATION: ROPE, NYLON, EIGHT STRAND PLAITED (29 MAR 1990) | ||||
| MIL-H-15317C | MILITARY SPECIFICATION: HOISTS, CHAIN OR WIRE ROPE, ELECTRIC POWER OPERATED, LUG, HOOK, OR TROLLEY SUSPENSION AND BASE MOUNTED (16 FEB 1982) [S/S BY ASME HST-1] | ||||
| MIL-STD-1840A | MILITARY STANDARD: AUTOMATED INTERCHANGE OF TECHNICAL INFORMATION (22 DEC 1987) | ||||
| MIL-E-24142B (NOTICE 1) | MILITARY SPECIFICATION: ENCLOSURE FOR ELECTRICAL FITTINGS AND FIXTURES, GENERAL SPECIFICATION FOR (17-DEC-1990) | ||||
| MIL-W-21714A (NOTICE 1) | MILITARY SPECIFICATION: WATER, DRINKING, NONMAGNETIC CANNED, EMERGENCY (07 JUN 1997) [NO S/S DOCUMENT | ||||
| MIL-H-6083E (AMENDMENT 2) | MILITARY SPECIFICATION: HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION (08 FEB 1990) [S/S BY MIL-PRF-6083F] | ||||
| MIL-PRF-31013 | PERFORMANCE SPECIFICATION: SPECTACLES, SPECIAL PROTECTIVE EYEWEAR CYLINDRICAL SYSTEM (SPECS) (25 APR 1996) | ||||
| MIL-STD-2149A | DEPARTMENT OF DEFENSE TEST METHOD STANDARD: STANDARD PROCEDURES FOR EXPLOSION TESTING FERROUS AND NON-FERROUS METALLIC MATERIALS AND WELDMENTS (02 FEB 1990) [S/S BY T9074-BD-GIB-010/300] | ||||
| MIL-STD-966 | MILITARY STANDARD: MONITORING STERILIZATION SYSTEMS FOR MEDICAL DEVICES (30 NOV 1979) | ||||
| MIL-STD-454M (NOTICE 3) | MILITARY STANDARD: STANDARD GENERAL REQUIREMENTS FOR ELECTRONIC EQUIPMENT (30 OCT 1991) [S/S BY MIL-HDBK-454] | ||||
| MIL-V-24630/2A (NOTICE-2) | DETAIL SPECIFICATION: VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID (28-FEB-2014) | ||||
| MIL-STD-40051B (w/CHANGE 1) | DEPARTMENT OF DEFENSE STANDARD PRACTICE: PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (30 NOV 2003) | ||||
| MIL-PRF-89020A | PERFORMANCE SPECIFICATION: DIGITAL TERRAIN ELEVATION DATA (19 APR 1996) [SUPERSEDES MIL-D-89020] | ||||
| MIL-STD-849B | DEPARTMENT OF DEFENSE STANDARD PRACTICE: INSPECTION REQUIREMENTS, DEFINITIONS AND CLASSIFICATION OF DEFECTS FOR PARACHUTES (25 JUL 2001) | ||||
| MIL-STD-115B | MILITARY STANDARD: GAGES, PLUG, THREAD, HI (NOT GO) FOR UNIFIED & AMERICAN NATIONAL STANDARD INTERNAL THREAD (15 MAR 1963) [NO S/S DOCUMENT] | ||||
| MIL-STD-2189/310-1 (NOTICE 1) | MILITARY STANDARD: DESIGN METHODS FOR NAVAL SHIPBOARD SYSTEMS (SECTION 310-1) ELECTRIC SYSTEM LOAD AND POWER ANALYSIS F | ||||
| MIL-DTL-5688E (W/ AMENDMENT 2) | DETAIL SPECIFICATION: WIRE ROPE ASSEMBLIES; AIRCRAFT, PROOF TESTING AND PRESTRETCHING OF (04 JAN 2011) |
若您对上表中数据有任何疑问，请与网站联系。
