检索关键词：

标准分类：

发布时间：

（清空日期可显示全部记录）

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
EN 3237:1998 Aerospace Series - Inserts, Thin Wall, Self-locking, Long, In Heat Resisting Nickel Base Alloy Ni-p100ht (inconel 718), Silver Plated Internal Thread
EN 3278:2012 Aerospace Series - Sleeves, Tubular, Protruding Head, In Corrosion Resisting Steel, Passivated (0,25 Mm Wall Thickness)
EN 3275:2002 Aerospace Series - Pipe Coupling 8 Degree 30 Minutes Up To 28 000 Kpa - Dynamic Beam Seal - Metric Series - Technical Specification
EN 3268:2014 Aerospace Series - Pipe Coupling 8 Degree 30 Minutes In Titanium Alloy - Pressure Plugs
EN 3269:2001 Aerospace Series - Pipe Coupling 8 Degree 30 Minutes In Titanium Alloy - Ferrules, Blind, With Dynamic Beam Seal End
EN 3267:2001 Aerospace Series - Washers, Bulkhead In Titanium Alloy
EN 3272:2001 Aerospace Series - Pipe Coupling 8 Degrees 30 Minutes - Dynamic Seal End For Ferrule, Welded - Geometric Configuration
EN 3270:2001 Aerospace Series - Pipe Coupling 8 Degrees 30 Minutes In Titanium Alloy - Blanking Plugs With Lockring
EN 3266:2001 Aerospace Series - Pipe Coupling In Titanium Alloy - Bulkhead Nut
EN 3264:2010 Aerospace Series - Pipe Coupling 8 Degrees 30 Minute In Titanium Alloy - Thrust Wire Nuts
EN 3273:2001 Aerospace Series - Pipe Coupling 8 Degrees 30 Minutes - Dynamic Beam Seal End For Elbows, Tees And Crosses - Geometric Configuration
EN 3264:2001 (Superseded) Aerospace Series - Pipe Coupling 8 Degree 30 Minutes In Titanium Alloy - Thrust Wire Nut
EN 3268:2001 (Superseded) Aerospace Series - Pipe Coupling 8 Degree 30 Minutes In Titanium Alloy - Pressure Plug
EN 3293:2008 Aerospace Series - Bolts, T-head, Close Tolerance, Medium Thread Length, In Heat Resisting Nickel Base Alloy Ni-p100ht (inconel 718), Uncoated - Classification: 1275 Mpa/650 Degrees C
EN 3291:1994 Aerospace Series - Bearings, Airframe Rolling - Single Row Self Aligning Roller Bearings In Steel, Cadmium Plated - Diameter Series 3 And 4 - Dimensions And Loads
EN 3290:1994 Aerospace Series - Bearings, Airframe Rolling - Single Row Self Aligning Roller Bearings In Steel - Diameter Series 3 And 4 - Dimensions And Loads
EN 3289:1994 Aerospace Series - Bearings, Airframe Rolling - Double Row Self Aligning Ball Bearings In Corrosion Resisting Steel - Diameter Series 2 - Dimensions And Loads
EN 3284:1994 Aerospace Series - Bearings, Airframe Rolling - Rigid Single Row Ball Bearings In Steel - Diameter Series 0 And 2 - Normal Clearance Category - Dimensions And Loads
EN 3283:1994 Aerospace Series - Bearings, Airframe Rolling - Rigid Single Row Ball Bearings In Corrosion Resisting Steel - Diameter Series 8 And 9 - Dimensions And Loads
EN 3282:1994 Aerospace Series - Bearings, Airframe Rolling - Rigid Single Row Ball Bearings In Steel, Cadmium Plated - Diameter Series 8 And 9 - Dimensions And Loads
EN 3292:1994 Aerospace Series - Bearings, Airframe Rolling - Single Row Self Aligning Roller Bearings In Corrosion Resisting Steel - Diameter Series 3 And 4 - Dimensions And Loads
EN 3285:1994 Aerospace Series - Bearings, Airframe Rolling - Rigid Single Row Ball Bearings In Steel, Cadmium Plated - Diameter Series 0 And 2 - Normal Clearance Category - Dimensions And Loads
EN 3286:1994 Aerospace Series - Bearings, Airframe Rolling - Rigid Single Row Ball Bearings In Corrosion Resisting Steel - Diameter Series 0 And 2 - Normal Clearance Category - Dimensions And Loads
EN 3281:1994 Aerospace Series - Bearings, Airframe Rolling - Rigid Single Row Ball Bearings In Steel - Diameter Series 8 And 9 - Dimensions And Loads
EN 3288:1994 Aerospace Series - Bearings, Airframe Rolling - Double Row Self Aligning Ball Bearings In Steel, Cadmium Plated - Diameter Series 2 - Dimensions And Loads
EN 3311:2009 Aerospace Series - Titanium Alloy Ti-p64001 (ti-6al-4v) - Annealed - Bar For Machining - D
EN 3310:2011 Aerospace Series - Titanium Alloy Ti-P64001 (Ti-6Al-4V) - Not Heat Treated - Forging Stock, For Annealed Forgings - D[E]
EN 3308:1996 Aerospace Series - Screws, Normal Hexagonal Head, Threaded To Head, In Titanium Alloy, Anodized, Mos[2] Lubricated - Classification: 1100 Mpa (at Ambient Temperature)/315 Degree C
EN 3306:1996 Aerospace Series - Screws, 100 Degree Countersunk Normal Head, Offset Cruciform Recess, Threaded To Head, In Titanium Alloy, Anodized, Mos2 Lubricated - Classification: 900 Mpa (at Ambient Temperature)/315 Degree C
EN 3305:1996 Aerospace Series - Screws, 100 Degree Countersunk Reduced Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, In Alloy Steel, Cadmium Plated - Classification: 1100 Mpa (at Ambient Temperature)/235 Degree C
EN 3307:1996 Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Threaded To Head, In Titanium Alloy Anodized, Mos2 Lubricated - Classification: 1100 Mpa (at Ambient Temperature)/315 Degree C
EN 3303:1997 Aerospace Series - Screws, Cap Head, Hexagon Socket, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - Classification: 1100 Mpa (at Ambient Temperature)/235 Degree C
EN 3287:1994 Aerospace Series - Bearings, Airframe Rolling - Double Row Self Aligning Ball Bearings In Steel - Diameter Series 2 - Dimensions And Loads
EN 3280:2011 Aerospace Series - Bearings, Airframe Rolling, Rigid Or Self Aligning - Technical Specification
EN 3341:2005 Aerospace Series - Aluminium Alloy Al-p6061 - T4 Or T42 - Sheet And Strip - 0.4 Mm
EN 3248:2001 Aerospace Series - Pipe Coupling 8 Degrees 30 Minutes In Titanium Alloy - Adaptors, Reduced Pipe End, With Lockring
EN 3335:2005 Aerospace Series - Aluminium Alloy Al-p7475 - O2 - Sheet For Superplastic Forming (spf) - 0,8 Mm
EN 3339:2006 Aerospace Series - Aluminium Alloy Al-p7010- - T76 - Die Forgings - A
EN 3333:2005 Aerospace Series - Aluminium Alloy Al-p7475 - T762 - Sheet And Strip - 0,6 Mm
EN 3280:1994 (Superseded) Aerospace Series - Bearings, Airframe Rolling, Rigid Or Self Aligning - Technical Specification
EN 3304:1996 Aerospace Series - Screws, 100 Degree Countersunk Reduced Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, In Titanium Alloy, Anodized, Mos2 Lubricated - Classification: 1100 Mpa (at Ambient Temperature)/315 Degree C
EN 3302:2007 Aerospace Series - Bolts In Heat Resisting Steel Fe-Pm1708 (Fv535) - Classification: 1000 Mpa/550 Degrees C - Technical Specification
EN 3329:2009 Aerospace Series - Steel Fe-pl1503 (35crmo4) - Annealead - Sheet And Strip - 0,3 Mm
EN 3326:2007 Aerospace Series - Bolts, D-head, Close Tolerance, Medium Thread Length, In Heat Resisting Nickel Base Alloy Ni-ph2601 (inco 718) - Classification: 1275 Mpa/650 Degrees C, Unplated
EN 3301:2007 Aerospace Series - Bolts, T-head, Close Tolerance Medium Thread Length In Heat Resisting Steel Fe-pm1708 (fv535), Uncoated - Classification: 1000 Mpa/550 Degrees C
EN 3327:2008 Aerospace Series - Bolts, Double Hexagon Head, Close Tolerance, Medium Thread Length, In Heat Resisting Nickel Base Alloy Ni-p100ht (inconel 718), Uncoated - Classification: 1275 Mpa/650 Degree C
EN 3325:2007 Aerospace Series - Bolts, T-head, Relieved Shank, Long Thread, In Heat Resisting Steel, Fe-pm1708 (fv535) - Classification: 1000 Mpa/550 Degrees C - Unplated
EN 3372-005:2007 Aerospace Series - Connectors, Electrical, Circular, Medium And High Contact Density, Scoop-proof With Bayonet Coupling, Operating Temperatures -65 Degrees C To 175 Degrees C Or 200 Degrees C Continuous - Part 005: Receptacle, Hermetic, Round Flange, Solder Mounting - Product Standard
EN 3372-003:2007 Aerospace Series - Connectors, Electrical, Circular, Medium And High Contact Density, Scoop-proof With Bayonet Coupling, Operating Temperatures -65 Degrees C To 175 Degrees C Or 200 Degrees C Continuous - Part 003: Square Flange Receptacle - Product Standard
EN 3372-002:2007 Aerospace Series - Connectors, Electrical, Circular, Medium And High Contact Density, Scoop-proof With Bayonet Coupling, Operating Temperatures -65 Degrees C To 175 Degrees C Or 200 Degrees C Continuous - Part 002: Specification Of Performance And Contact Arrangements
776140 条记录 11464/15523 页 第一页 <上一页  11460   11461   11462   11463  11464  11465   11466   11467   11468  下一页> 最后一页

若您对上表中数据有任何疑问，请与网站联系。