（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AS151401A | Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .4375-14 UNS X .3750-24 UNF-3A | ||||
| AS39029/59 | Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 8 (For MIL-DTL-38999 Series I, III, and IV Connectors) | ||||
| AMS2251G | Tolerances Low-Alloy Steel Bars | ||||
| AMS4640H | Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings, 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe, Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50) | ||||
| AMS4640G | Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5cu 10.0al 4.8ni 3.0fe Drawn and Stress Relieved (Hr50) Or Temper Annealed (Tq50) | ||||
| AMS4640C | Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings, 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe, Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50) | ||||
| AMS4640E | Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings, 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe, Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50) | ||||
| AMS4640D | Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings, 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe, Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50) | ||||
| AMS4640F | Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5cu 10.0al 4.8ni 3.0fe Drawn and Stress Relieved (Hr50) Or Temper Annealed (Tq50) | ||||
| AMS4640A | Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings, 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe, Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50) | ||||
| AS22520/1 | CRIMPING TOOLS, TYPE I, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 12 THROUGH 22 AND COAXIAL INNER CONTACTS | ||||
| AMS4640 | Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings, 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe, Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50) | ||||
| AS1895/14C | Flange End, Male, Type II Low Profile, Design Standard | ||||
| AMS4640B | Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings, 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe, Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50) | ||||
| AS1895/15A | Flange End, Female, Type II, Low Profile, Design Standard | ||||
| AS1895/15 | Flange End, Female, Type II, Low Profile, Design Standard | ||||
| AMS6387 | Steel, Carbon, Laminated Sheet, Surface Bonded | ||||
| AMS6387A | Steel, Carbon, Laminated Sheet, Surface Bonded | ||||
| AMSDTL22499/4A | Shim Stock, Laminated, Carbon Steel(Cancelled Jun 2008) | ||||
| AMSDTL22499/4 | Shim Stock, Laminated, Carbon Steel | ||||
| AMS6387B | Steel, Carbon, Laminated Sheet, Surface Bonded | ||||
| AMS4108F | Aluminum Alloy, Hand Forgings, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged | ||||
| AMS4108 | Aluminum Alloy, Hand Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged | ||||
| AMS4108C | Aluminum Alloy, Hand Forgings, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged | ||||
| AMS5652G | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 25Cr - 20Ni - 2Si (SAE 30314), Solution Heat Treated | ||||
| AMS5652F | Steel, Corrosion and Heat Resistant, Bars, Forgings, Tubing, and Rings, 25Cr - 20Ni - 2.0SI (SAE 30314) Solution Heat Treated | ||||
| AS1895/15D | Flange End, Female, Type II Low Profile, Design Standard | ||||
| AS1895/15B | Flange End, Female, Type II, Low Profile, Design Standard | ||||
| AS1895/15E | Flange End, Female, Type II, Low Profile, Design Standard | ||||
| AS1895/15C | Flange End, Female, Type II, Low Profile, Design Standard | ||||
| AMS2807 | Identification, Carbon and Low-Alloy Steels, Corrosion and Heat Resistant Steels and Alloys Sheet, Strip, Plate, and Aircraft Tubing | ||||
| AS25244A | Circuit Breaker, Trip-Free, Push-Pull, 5 Thru 50 Amp, Type I | ||||
| AS25244B | CIRCUIT BREAKER, TRIP-FREE, PUSH-PULL, 5 THRU 50 AMP, TYPE I | ||||
| AS25244 | Circuit Breaker, Trip-Free, Push-Pull, 5 Thru 50 Amp, Type I | ||||
| AS29513B | PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, "O" RING | ||||
| AS29513A | Packing, Preformed, Hydrocarbon Fuel-Resistant, "O" Ring | ||||
| AMS2807B | Identification, Carbon and Low-Alloy Steels, Corrosion and Heat-Resistant Steels and Alloys, Sheet, Strip, Plate, and Aircraft Tubing | ||||
| AMS2807A | Identification Carbon and Low-Alloy Steels, Corrosion and Heat Resistant Steels and Alloys Sheet, Strip, Plate, and Aircraft Tubing | ||||
| AMS6263J | Steel Bars, Forgings, and Tubing 1.2cr 3.2ni 0.12mo (0.11 0.17c) (SAE 9315) | ||||
| J1699/4_201404 | OBD-II Communications Anomaly List | ||||
| AMS6263K | Steel Bars, Forgings, and Tubing, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) (SAE 9315) | ||||
| AMS6263L | Steel Bars, Forgings, and Tubing, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) | ||||
| AMS5762D | Steel Bars, Wire, and Forgings, Corrosion Resistant, 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S, Free Machining, Solution Heat Treated | ||||
| AMS5762C | Steel, Corrosion Resistant, Bars, Wire, and Forgings, 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S, Free Machining, Solution Heat Treated | ||||
| AMS6263M | Steel Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) (9315) | ||||
| AMS5762 | Steel, Corrosion Resistant, Bars, Wire, and Forgings, 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S, Free Machining, Solution Heat Treated | ||||
| AMS5762B | Steel, Corrosion Resistant, Bars, Wire, and Forgings, 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S, Free Machining, Solution Heat Treated | ||||
| AMS5762A | Steel, Corrosion Resistant, Bars, Wire, and Forgings, 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S, Free Machining, Solution Heat Treated | ||||
| AMS6263 | Steel Bars, Forgings, and Tubing, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) | ||||
| AMS5762G | Steel, Corrosion Resistant, Bars, Wire, and Forgings 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S Free Machining, Solution Heat Treated |
若您对上表中数据有任何疑问，请与网站联系。
