（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AS39029/125 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, COAXIAL, SIZE 12, WITH AS22520 TOOL PART NUMBERS (FOR MIL-DTL-38999 SERIES I, II, III AND IV CONNECTORS) | ||||
| AS13001 | Supplier Self Release Training Requirements | ||||
| ARP6348 | Guidance for Assessment and Mitigation of Early Wearout of Life-limited Microcircuits | ||||
| ARP6420 | Flow Descriptors for Characterization of Turbine Engine Inlet Distortion | ||||
| ARP6204 | Condition Based Maintenance (CBM) Recommened Practices | ||||
| ARP3051 | Elastomer Components Manufacturing Processing Requirements | ||||
| AS6357 | Assembled Coupling Components, Threadless-Flexible, Fixed Cavity, High Conductivity, Self Bonding | ||||
| AS6360 | FEMALE FERRULE, THREADLESS - FLEXIBLE, FIXED CAVITY, HIGH CONDUCTIVITY, SELF-BONDING, SWAGED | ||||
| AS6358 | MALE FERRULE, THREADLESS - FLEXIBLE, FIXED CAVITY, HIGH CONDUCTIVITY, SELF-BONDING, SWAGED | ||||
| AS6171/9 | Techniques for Suspect/Counterfeit EEE Parts Detection by Fourier Transform Infrared Spectroscopy (FTIR) Test Methods | ||||
| AS6174A/1 | AS6174A/VM: Compliance Verification Matrix (VM) Slash Sheet for SAE AS6174A, Counterfeit Materiel; Assuring Acquisition of Authentic and Conforming Materiel | ||||
| AS6359 | MALE FERRULE, THREADLESS - FLEXIBLE, FIXED CAVITY, HIGH CONDUCTIVITY, SELF-BONDING, BUTT WELDED | ||||
| AS6171/8 | Techniques for Suspect/Counterfeit EEE Parts Detection by Raman Spectroscopy Test Methods | ||||
| AS6171/7 | Techniques for Suspect/Counterfeit EEE Parts Detection by Electrical Test Methods | ||||
| AS62360-TSC | Amendment Record for Drawing Standard No. AS62360 | ||||
| AS6171/17 | Technique for Suspect/Counterfeit EEE Parts Detection by Laser Scanning Microscopy (LSM) Test Methods | ||||
| AS6294 | PEM Qualification and SCreeing | ||||
| AS6171/15 | AS6171 TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PART PACKAGING DETECTION BY VARIOUS TEST METHODS | ||||
| AS6224/2 | AS6224/2 REPAIR SLEEVE, INSULATION DAMAGE, TAPE-WRAP STYLE, ENVIRONMENTAL, 200*C | ||||
| GEIAHB649 | Implementation Guide for Configuration Management | ||||
| GAF15A | General Agreement for Wording of the Quality Paragraph for Tubing Specifications | ||||
| GAE15AA | General Agreement Ballot for Reduced Grain Size Sampling | ||||
| B13AA | Nanocrystalline Cobalt-Phosphorus Electroplating | ||||
| B16AA | Plating, Brush, Nickel-Tungsten Low Hydrogen Embrittlement | ||||
| CE16AA | Fluid, Reference for Testing Polyalphaolefin (PAO) Resistant Material | ||||
| CE11AA | Acrylonitrile Butadiene (Nbr) For Fuel Resistant Seals 60 to 70 | ||||
| D15AE | Aluminum Alloy, Bar, Rod, Wire, and Special Shapes, 4.5Cu - 0.85Si - 0.80Mg (2014-O) Rolled, Drawn, or Cold Finished | ||||
| D15AF | Aluminum Alloy Bar, Rod, Wire, and Special Shapes, 4.5Cu - 0.85 Si - 0.8 Mn - 0.50Mg (2014:-T4, -T451) Rolled, Drawn, or Cold Finished | ||||
| AS9138 | Statistical Product Acceptance | ||||
| D16AA | Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed 6061B/SiC/40p (3-micron) (T1P) | ||||
| D15AA | Aluminum Alloy, Die Forgings 3.5Cu 芒聙聯 1.0Li - 0.04Mg 芒聙聯 0.35Mn 芒聙聯 0.45Ag 芒聙聯 0.12Zr (2050-T852) Solution Heat Treated, Compression Stress-Relieved, and Overaged | ||||
| TS251-TSC | Amendment Record for Technical Specification No. TS251 | ||||
| P1713AG | Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials, Type 35, Class 4, Grade 298, Style 6781 | ||||
| P1713AH | Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials, Type 36, Class 2, Grade 193, Style 3k-70-PW | ||||
| P1713AI | T700S-12K-50C/#2511 Advanced Composite 芒聙聯 250脗掳F Cure 芒聙聯 Plain Weave Fabric Prepreg of Carbon Fiber and Epoxy Resin | ||||
| P1713AI/1 | T700S-12K-50C/#2511 PW Slash Sheet to Project P1713A1 | ||||
| P1712AF | Quartz Fiber Reinforced Toughened Epoxy Fabric Prepreg, Atmospheric Pressure Curing | ||||
| P1713AF | Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials | ||||
| P1713AE | Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials, Type 35, Class 4, Grade 293, Style 7781 | ||||
| P1712AG | Advanced Composites Prepreg - Nominal 250 F Cure - Glass Fiber and Epoxy Resin - 8HS Weave Fabric | ||||
| TS200-42 | TS200 Qualified Manufacturers for SAE ITC Aerospace Industry Standard Parts (AS, AGS, and ESC Series) | ||||
| AMS5080K | Steel, Bars, Forgings, and Tubing 0.31 - 0.38C (SAE 1035) (STABILIZED Mar 2016) | ||||
| AMS5080E | Steel, Bars, Forgings, and Tubing, 0.31 - 0.38C (SAE 1035) | ||||
| AS1339 | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400脗掳F, Lightweight, Hydraulic and Pneumatic | ||||
| AMS5080F | Steel, Bars, Forgings, and Tubing, 0.31 - 0.38C (SAE 1035) | ||||
| AMS5080D | Steel, Bars, Forgings, and Tubing, 0.31 - 0.38C (SAE 1035) | ||||
| AMS5080G | Steel, Bars, Forgings, and Tubing, 0.31 - 0.38C (SAE 1035) | ||||
| AMS5080A | Steel, Bars, Forgings, and Tubing, 0.31 - 0.38C (SAE 1035) | ||||
| AMS5080C | Steel, Bars, Forgings, and Tubing, 0.31 - 0.38C (SAE 1035) | ||||
| AMS5080 | Steel, Bars, Forgings, and Tubing, 0.31 - 0.38C (SAE 1035) |
若您对上表中数据有任何疑问，请与网站联系。
