（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ARP5293 | Safety Considerations for Lasers Projected in the Navigable Airspace | ||||
| AS34121 | Connectors, Receptacle, Electric, Wall Mounting, Front Release, Crimp Contact, AN Type - With Accessory Threads | ||||
| ARP5572 | Control Measures for Laser Safety in the Navigable Airspace | ||||
| AIR5552 | Development and Qualification of Composite Landing Gears | ||||
| AIR5885 | Landing Gear Common Repair | ||||
| AIR1389 | Regulatory Requirements Covering the Use of Breathing Oxygen in Aircraft | ||||
| AS21910 | Tee, Bulkhead, Flareless Tube, Internal Thread on Side | ||||
| AS5506/2 | SAE Architecture Analysis and Design Language (AADL) Annex Volume 2 | ||||
| AMS4480 | Aluminum Alloy, Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged | ||||
| AMS4466 | Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T361 Sheet & Plate), Solution Heat Treated, 6% Cold Worked and Naturally Aged | ||||
| AS4842/1 | Fittings, 37脗掳 Flared to Pipe Threaded, Fluid Connection | ||||
| AS5900 | Standard Test Method for Aerodynamic Acceptance of SAE AMS 1424 and SAE AMS 1428 Aircraft Deicing/Anti-icing Fluids | ||||
| AMS4269 | Aluminum Alloy, Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn (2024-T361), Solution Heat Treated and Cold Worked | ||||
| AMS4268 | Aluminum Alloy, Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn (2024-T81 Sheet, -T851 Plate), Solution Heat Treated, Cold Worked and Artificially Aged | ||||
| AS5194 | Fitting, Adapter, Straight Pipe to Flared | ||||
| AMS5608 | Cobalt Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 40Co - 22Cr - 22Ni - 14.5W - 0.07La, Solution Heat Treated | ||||
| AMS4048 | Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-0) Annealed | ||||
| AMS7268 | Rings, Sealing, Silicone Rubber, Low Compression Set, Non-Oil Resistant 65-75 | ||||
| AIR6237 | Loss-of-Control Misaps in Scheduled Airline Service | ||||
| AMS5763 | Steel, Corrosion Resistant Bars, Forgings, Tubing, and Rings, 15Cr - 6.5Ni - 0.75Mo - 0.50Cb (Nb) - 1.5Cu, Solution Heat Treated | ||||
| AS21980 | Ferrule, Outer, Uninsulated, Shield Terminating, Type I, Two Piece, Class I, for Shielded Cables | ||||
| AS900-5 | AS900-1142 B.S. Chains and Fittings Assembly Code | ||||
| AS62250-5 | AS62250-284 Clamp, Loop Style (Snap Lock) Cushion Reinforced (Electrical Harness) (for 6,00mm and 0.2500 Inch Fasteners) | ||||
| ARP958 | Electromagnetic Interference Measurement Antennas; Standard Calibration Method | ||||
| AIR1362 | Aerospace Hydraulic Fluids Physical Properties | ||||
| AIR6236 | In-House Verification of EMI Test Equipment | ||||
| AS9505 | Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .5000-20 UNJF-3A | ||||
| AS9503 | Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .3750-24 UNJF-3A | ||||
| AIR6236 | In-House Verification of EMI Test Equipment | ||||
| AS9501 | Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .2500-28 UNJF-3A | ||||
| AS3574 | Bolt, Shear - Double Hex Head, UNS N07718 - 185 ksi | ||||
| AS9502 | Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .3125-24 UNJF-3A | ||||
| AS26600-4 | AS26600-699 Bolt, Close Tolerance-Dee Head, BS. S.159, .500-20 UNJF.-3A. MOD. B.S.4084 | ||||
| AS9500 | Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .1900-32 UNJF-3A | ||||
| AS2419-5 | AS2419 Assembly - Drain Plug | ||||
| AS2446-3 | AS2446-2450 Pin (Quick-Release) | ||||
| AS2434-10 | AS2434-2438 Quick-Release Pins (Ringed) | ||||
| AS23000AR-5 | AS23000-AR Amendment Record for Drawing Standard No. AS23000-099 | ||||
| AS20740-3 | AS20740-759 Pin, Grooved, Headless | ||||
| AS1914-6 | AS1914 Knob (Propeller Control) | ||||
| AS1854-7 | AS1854-1857 Hinges (Aluminium Alloy Single Flange Plates) | ||||
| AS1709 | Coupling Assembly, Hydraulic Self Sealing, Quick Disconnect | ||||
| AS1283-3 | AS1283-1298 Screw End, Female (Swaged on Cable) | ||||
| AMS10137B | Channel - Extruded(STABILIZED Mar 2012) | ||||
| AS62140-2 | AS62140-149 Insert Salvage- Inch Thinwall- Short, Screw Locking (INCO 718) | ||||
| AS62200-5 | AS62200-234 Clamp, Loop Style (Snap Lock) Cushion Reinforced (Electrical Harness) (for 5,00mm and 0.1900 Inch Fasteners) | ||||
| AS62160-2 | AS62160-169 Insert Salvage- Inch Thinwall - Long Screw Locking (INCO 718) | ||||
| AS62351-1 | AS62351 Nut Union - Male (Cres) | ||||
| AS62350-1 | AS62350 Nut Union (Cres) | ||||
| AS62300-2 | AS62300-349 Nut, Self Locking, Shank, Flange Restrained, Waspaloy |
若您对上表中数据有任何疑问，请与网站联系。
