（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| DS ISO 13400-3:2012 | Road Vehicles - Diagnostic Communication Over Internet Protocol (Doip) - Part 3: Wired Vehicle Interface Based On Ieee 802.3 | ||||
| DS ISO/TS 21609:2014 | Road Vehicles - (Emc) Guidelines For Installation Of Aftermarket Radio Frequency Transmitting Equipment | ||||
| DS ISO/TS 19072-4:2012 | Road Vehicles - Connection Interface For Pyrotechnic Devices, Two-Way And Three-Way Connections - Part 4: Pyrotechnic Device And Harness Connector Assembly - Type 2 | ||||
| DS ISO/TS 16949:2009 | Quality Management Systems - Particular Requirements For The Application Of Iso 9001:2008 For Automotive Production And Relevant Service Part Organizations | ||||
| DS ISO/TR 8713:2012 | Electrically Propelled Road Vehicles - Vocabulary | ||||
| DS ISO/TR 10305-2:2003 | Road Vehicles - Calibration Of Electromagnetic Field Strength Measuring Devices - Part 2: Ieee Standard For Calibration Of Electromagnetic Field Sensors And Probes, Excluding Antennas, From 9 Khz To 40 Ghz | ||||
| DS ISO/TR 10305-1:2003 | Road Vehicles - Calibration Of Electromagnetic Field Strength Measuring Devices - Part 1: Devices For Measurement Of Electromagnetic Fields At Frequencies > 0 Hz | ||||
| DS ISO/IEC PAS 16898:2013 | Electrically Propelled Road Vehicles - Dimensions And Designation Of Secondary Lithium-Ion Cells | ||||
| DS ISO/IEC 15118-2:2014 | Road Vehicles - Vehicle-To-Grid Communication Interface - Part 2: Network And Application Protocol Requirements | ||||
| DS ISO 8856:2014 | Road Vehicles - Electrical Performance Of Starter Motors - Test Methods And General Requirements | ||||
| DS ISO 9367-1:1992 | Lashing And Securing Arrangements On Road Vehicles For Sea Transportation On Ro/Ro Ships - General Requirements - Part 1: Commercial Vehicles And Combinations Of Vehicles, Semitrailers Excluded | ||||
| DS ISO 8820-9:2014 | Road Vehicles - Fuse-Links - Part 9: Fuse-Links With Shortened Tabs (Type K) | ||||
| DS EN 61851-24:2014 | Electric Vehicle Conductive Charging System - Part 24: Digital Communication Between A D.C. Ev Charging Station And An Electric Vehicle For Control Of D.C. Charging | ||||
| DS EN 1493:2010 | Vehicle Lifts | ||||
| RAL GZ 791:2014 | Buskomfort | ||||
| RAL UZ 184:2013 | Basic Criteria For Award Of The Environmental Label - Ment Catalytic Converters | ||||
| RAL UZ 59:2014 | Basic Criteria For Award Of The Environmental Label - Low-Noise And Low-Pollutant Municipal Vehicles And Buses | ||||
| ENA NENS 05-2006 | National fall protection guidelines for the electricity industry | ||||
| ENA NENS 04-2006 | National guidelines for safe approach distances to electrical and mechanical apparatus | ||||
| EN 50066:1992 | Mini-couplers For The Interconnection Of Electrical Mains Supplied Equipment In Road Vehicles | ||||
| EN 50325-1:2002 | Industrial Communications Subsystem Based On Iso 11898 (can) For Controller-device Interfaces - Part 1: General Requirements | ||||
| EN 50325-3:2001 | Industrial Communications Subsystem Based On Iso 11898 (can) For Controller-device Interfaces - Smart Distributed System (sds) | ||||
| EN 50325-4:2002 | Industrial Communications Subsystem Based On Iso 11898 (can) For Controller-device Interfaces - Part 4: Canopen | ||||
| EN 50325-5:2010 | Industrial Communications Subsystem Based On Iso 11898 (Can) For Controller-Device Interfaces - Part 5: Functional Safety Communication Based On En 50325-4 | ||||
| EN 50374:2004 | Conductor Cars | ||||
| EN 50408:2008 | Household And Similar Electrical Appliances - Safety - Particular Requirements For Cab Heaters For Vehicles | ||||
| EN 50436-1:2014 | Alcohol Interlocks - Test Methods And Performance Requirements - Part 1: Instruments For Drink-Driving-Offender Programs | ||||
| EN 50436-2:2014 | Alcohol Interlocks - Test Methods And Performance Requirements - Part 2: Instruments Having A Mouthpiece And Measuring Breath Alcohol For General Preventive Use | ||||
| EN 50436-6:2015 | Alcohol Interlocks - Test Methods And Performance Requirements - Part 6: Data Security | ||||
| PREN 50436-3:2015 | Alcohol Interlocks - Test Methods And Performance Requirements - Part 3: Guidance For Authorities, Decision Makers, Purchasers And Users | ||||
| CLC/TR 50436-3:2010 | Alcohol Interlocks - Test Methods And Performance Requirements - Part 3: Guidance For Decision Makers, Purchasers And Users | ||||
| EN 50498:2010 | Electromagnetic Compatibility (Emc) - Product Family Standard For Aftermarket Electronic Equipment In Vehicles | ||||
| CLC/TS 50457-2:2008 | Conductive Charging For Electric Vehicles - Part 2: Communication Protocol Between Off-board Charger And Electric Vehicle | ||||
| CLC/TS 50457-1:2008 | Conductive Charging For Electric Vehicles - Part 1: D.c. Charging Station | ||||
| PREN 50436-7:2015 | Alcohol Interlocks - Test Methods And Performance Requirements - Part 7: Installation Document | ||||
| PREN 50620:2014 | Charging Cables For Electric Vehicles | ||||
| EN 55012:2007 | Vehicles, Boats And Internal Combustion Engines - Radio Disturbance Characteristics - Limits And Methods Of Measurement For The Protection Of Off-board Receivers | ||||
| HD 60364-7-722:2016 | Low-Voltage Electrical Installations - Part 7-722: Requirements For Special Installations Or Locations - Supplies For Electric Vehicles | ||||
| EN 60349-2:2010 | Electric Traction - Rotating Electrical Machines For Rail And Road Vehicles - Part 2: Electronic Converter-Fed Alternating Current Motors | ||||
| EN 60349-1:2010 | Electric Traction - Rotating Electrical Machines For Rail And Road Vehicles - Part 1: Machines Other Than Electronic Convertor-Fed Alternating Current Motors | ||||
| EN 60349-1:2002 | Electric Traction - Rotating Electrical Machines For Rail And Road Vehicles - Part 1: Machines Other Than Electronic Convertor-Fed Alternating Current Motors | ||||
| EN 60809:2015 | Lamps For Road Vehicles - Dimensional, Electrical And Luminous Requirements (Iec 60809:2014) | ||||
| EN 61044:1992 | Opportunity-charging Of Lead-acid Traction Batteries | ||||
| EN 61851-1:2011 | Electric Vehicle Conductive Charging System - Part 1: General Requirements | ||||
| EN 61851-21:2002 | Electric Vehicle Conductive Charging System - Electric Vehicle Requirements For Conductive Connection To An A.c/d.c. Supply | ||||
| EN 61851-22:2002 | Electric Vehicle Conductive Charging System - Ac Electric Vehicle Charging Station | ||||
| EN 61851-24:2014 | Electric Vehicle Conductive Charging System - Part 24: Digital Communication Between A D.C. Ev Charging Station And An Electric Vehicle For Control Of D.C. Charging (Iec 61851-24:2014) | ||||
| EN 61851-23:2014 | Electric Vehicle Conductive Charging System - Part 23: Dc Electric Vehicle Charging Station (Iec 61851-23:2014) | ||||
| EN 62196-1:2014 | Plugs, Socket-Outlets, Vehicle Connectors And Vehicle Inlets - Conductive Charging Of Electric Vehicles - Part 1: General Requirements (Iec 62196-1:2014, Modified) | ||||
| EN 62196-2:2012 | Plugs, Socket-Outlets, Vehicle Connectors And Vehicle Inlets - Conductive Charging Of Electric Vehicles - Part 2: Dimensional Compatibility And Interchangeability Requirements For A.C. Pin And Contact-Tube Accessories (Iec 62196-2:2011) |
若您对上表中数据有任何疑问，请与网站联系。
