（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/DIS 19713-2 | Road vehicles - Inlet air cleaning equipment for internal combustion engines and compressors - Part 2: Fractional efficiency testing with coarse particles (5 m to 40 m optical diameter) | ||||
| ISO/DIS 19713-1 | Road vehicles - Inlet air cleaning equipment for internal combustion engines and compressors - Part 1: Fractional efficiency testing with fine particles (0,3 m to 5 m optical diameter) | ||||
| ISO/DIS 19724 | Gasoline engines with direct injection - Cleanliness assessment of fuel injection equipment | ||||
| ISO/DIS 19689 | Motorcycles and Mopeds - Communication between vehicle and external equipment for diagnostics - Diagnostic connector and related electrical circuits, specification and use | ||||
| ISO 2575:2004/DAmd 6 | Road vehicles - Symbols for controls, indicators and tell-tales - Amendment 6 | ||||
| ISO/DIS 19377 | Heavy commercial vehicles and buses - Emergency braking on a defined path - Test method for trajectory measurement | ||||
| ISO/DIS 4114 | Road Vehicles - Caravans And Light Trailers Having A Gross Vehicle Weight Not Exceeding 3,5 T - Static Load On Coupling Ball | ||||
| ISO/FDIS 4040 | Road Vehicles - Location Of Hand Controls, Indicators And Tell-tales In Motor Vehicles | ||||
| ISO/DIS 4081 | Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification | ||||
| ISO 4000-2:2001/DAmd 1 | Passenger car tyres and rims - Part 2: Rims - Amendment 1 | ||||
| ISO/DIS 3536 | Road vehicles - Safety glazing materials - Vocabulary | ||||
| ISO/DIS 29061-5 | Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 5: Installation and securing of child in a booster seat | ||||
| ISO 2575:2010/DAmd 2.2 | Road vehicles - Symbols for controls, indicators and tell-tales - Amendment 2 | ||||
| ISO/DIS 29061-3 | Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 3: Installation of child restraint systems using vehicle seat belts | ||||
| ISO 2575:2010/FDAmd 5 | Road vehicles - Symbols for controls, indicators and tell-tales - Amendment 5 | ||||
| ISO/DIS 29061-4 | Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 4: Securing of child in child restraint system and daily handling aspects | ||||
| ISO 6460-3:2007/DAmd 1 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed - Amendment 1 | ||||
| ISO 6487:2002/DAmd 2 | Road vehicles - Measurement techniques in impact tests - Instrumentation - Amendment 2: ADT temperature measurement | ||||
| ISO/DIS 6622-2 | Internal combustion engines - Piston rings - Part 2: Rectangular rings made of steel | ||||
| ISO/DIS 6621-4 | Internal combustion engines - Piston rings - Part 4: General specifications | ||||
| ISO/DIS 7591 | Road vehicles - Retro-reflective registration plates for motor vehicles and trailers - Specifications | ||||
| ISO/DIS 7401 | Road vehicles - Lateral transient response test methods - Open-loop test methods | ||||
| ISO/DIS 6727 | Road vehicles - Motorcycles - Symbols for controls, indicators and telltales | ||||
| ISO/FDIS 6699 | Cycles - Stem and handlebar bend - Assembly dimensions | ||||
| ISO/DIS 6626-2 | Internal combustion engines - Piston rings - Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron | ||||
| ISO/DIS 6624-3 | Internal combustion engines - Piston rings - Part 3: Keystone rings made of steel | ||||
| ISO/DIS 6624-2 | Internal combustion engines - Piston rings - Part 2: Half keystone rings made of cast iron | ||||
| ISO/DIS 6624-1 | Internal combustion engines - Piston rings - Part 1: Keystone rings made of cast iron | ||||
| ISO/DIS 6623 | Internal combustion engines - Piston rings - Scraper rings made of cast iron | ||||
| ISO/FDIS 7637-3 | Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines | ||||
| ISO/DIS 8437.2 | Snowthrowers - Safety requirements and test procedures | ||||
| GOST 10132:1962 | Diesel Two-Wire Glow Plugs - General Specifications | ||||
| GOST R ISO 10326-1:1999 | Mechanical Vibration - Laboratory Method For Evaluating Vehicle Seat Vibration - Part 1 - Basic Requirements | ||||
| GOST 10409:1974 | Automotive Wheels With Sectional Rims - Basic Dimensions - General Technical Requirements | ||||
| GOST 10410:1982 | Undismountable Wheel Rims For Tractors, Selfpropelled Tool Carriers, Agricultural Machines, Tractor Trailers And Semitrailers - Specifications | ||||
| GOST 10578:1995 | Diesel Engine Fuel Pumps - General Specifications | ||||
| GOST 10579:1988 | Injectors For Diesels - General Specifications | ||||
| GOST 10598:1982 | Air-water Coolers For Supercharged Diesels And Gas Engines - General Specifications | ||||
| GOST 10806:1978 | Motorcycle Engines - Nominal Cylinder Bores | ||||
| GOST R ISO 11439:2010 | Gas Cylinders - High Pressure Cylinders For The On-Board Storage Of Natural Gas As A Fuel - Specifications | ||||
| GOST 1142:1990 | Horse-driven Load Carriages - Specifications | ||||
| GOST 11646:1982 | Wheel Fixing Details And Attachments For Tractors, Self Propelled Tool Carriers, Agricultural Machines, Tractor Trailers And Semitrailers - Dimensions | ||||
| GOST 12017:1981 | Fifth-wheel King Pins Of Automobile Semi-trailers - Types And Basic Dimensions | ||||
| GOST 12105:1974 | Truck Tractors And Semi-trailers - Connecting Dimensions | ||||
| GOST R ISO 12219-1:2014 | Interior Air Of Road Vehicles - Part 1: Whole Vehicle Test Chamber - Specification And Method For The Determination Of Volatile Organic Compounds In Cabin Interiors | ||||
| GOST R ISO 12214:2011 | Ergonomics Of Vehicles - Direction-Of-Motion Stereotypes For Automotive Hand Controls | ||||
| GOST R ISO 12219-3:2014 | Interior Air Of Road Vehicles - Part 3: Screening Method For The Determination Of The Emissions Of Volatile Organic Compounds From Vehicle Interior Parts And Materials - Micro-Scale Chamber Method | ||||
| GOST R ISO 12219-2:2014 | Interior Air Of Road Vehicles - Part 2: Screening Method For The Determination Of The Emissions Of Volatile Organic Compounds From Vehicle Interior Parts And Materials - Bag Method | ||||
| GOST R ISO 12405-1:2013 | Electrically Propelled Road Vehicles - Test Specification For Lithium-Ion Traction Battery Packs And Systems - Part 1: High-Power Applications | ||||
| GOST 12391:1977 | Panel Board Flexible Shafts For Vehicle - Specifications |
若您对上表中数据有任何疑问，请与网站联系。
