（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| KS R IEC 61851-22:2013 | Electric vehicle conductive charging system - Part 22:AC electric vehicle charging station | ||||
| KS R IEC 60254-2:2003 | Lead-acid traction batteries - Part 2:Dimensions of cellsand terminals and marking of polarity on cells | ||||
| KS R ISO 10604:2004 | Road vehicles - Measurement equipment for orientation ofheadlamp luminous beams | ||||
| KS R ISO 11452-1:2013 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1:General principles and terminology | ||||
| KS R ISO 10599-2:2004 | Car radios - Coaxial aerial connectors - Part 2:Characteristic values, performance requirements and tests | ||||
| KS R ISO 11451-4:2013 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4:Bulk current injection (BCI) | ||||
| KS R ISO 11451-3:2002 | Road vehicles - Electrical disturbances by narrowbandradiated electromagnetic energy - Vehicle test methods - Part 3:On-board transmitter simulation | ||||
| KS R ISO 11451-2:2013 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2:Off-vehicle radiation sources | ||||
| KS R ISO 11451-1:2013 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1:General principles and terminology | ||||
| KS R ISO 11243:2003 | Cycles - Luggage carriers for bicycles - Concepts, classification and testing | ||||
| KS R ISO 11157:2014 | Road vehicles — Brake lining assemblies — Inertia dynamometer test method | ||||
| KS R ISO 11155-2:2005 | Road vehicles - Air filters for passenger compartments - Part 2:Test for gaseous filteration | ||||
| KS R ISO 11155-1:2008 | Road vehicles - Air filters for passenger compartments - Part 1:Test for particulate filtration | ||||
| KS R ISO 1102:2014 | Commercial road vehicles — 50 mm drawbar eye — Interchangeability | ||||
| KS R ISO 11096:2014 | Road vehicles — Pedestrian protection — Impact test method for pedestrian thigh, leg and knee | ||||
| KS R ISO 10997:2014 | Passenger vehicles — Side impact with deformable moving barrier — Full scale test | ||||
| KS R ISO 11452-3:2013 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3:Transverse electromagnetic (TEM) cell | ||||
| KS R ISO 10982:2008 | Road vehicles - Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags | ||||
| KS R ISO 11452-2:2013 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2:Absorber-lined shielded enclosure | ||||
| KS R ISO 11898-4:2007 | Road vehicles - Controller area network(CAN) - Part 4:Time-triggered communication | ||||
| KS R ISO 11898-2:2007 | Road vehicles - Controller area network(CAN) - Part 2:High-speed medium access unit | ||||
| KS R ISO 11898-1:2003 | Road vehicles - Controller area network (CAN) - Part 1:Data link layer and physical signalling | ||||
| KS R ISO 1185:2004 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 pole connector type 24N(normal)for vehicles with 24V nominal supply voltage | ||||
| KS R ISO 1176:2008 | Road vehicles - Masses - Vocabulary and codes | ||||
| KS R ISO 11614:2001 | Reciprocating internal combustion compression-ignition engines - Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas | ||||
| KS R ISO 11565:2014 | Road vehicles — Spark-plugs — Test methods and requirements | ||||
| KS R ISO 11530:2014 | Road vehicles — Hydraulic jacks — Specifications | ||||
| KS R ISO 11486:2014 | Motorcycles — Methods for setting running resistance on a chassis dynamometer | ||||
| KS R ISO 11452-8:2013 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8:Immunity to magnetic fields | ||||
| KS R ISO 11452-7:2013 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7:Direct radio frequency (RF) power injection | ||||
| KS R ISO 11452-5:2013 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5:Stripline | ||||
| KS R ISO 11452-4:2013 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4:Harness excitation methods | ||||
| KS R ISO 12097-1:2003 | Road vehicles - Airbag components - Part 1:Vocabulary | ||||
| KS R ISO 12353-1:2003 | Road vehicles - Traffic accident analysis - Part 1:Vocabulary | ||||
| KS R ISO 13214:2004 | Road vehicles - Child restraint systems - Compilation of Regulations and standards | ||||
| KS R ISO 12353-2:2005 | Road vehicles - Traffic accident analysis - Part 2:Guidelines for the use of impact severity measures | ||||
| KS R ISO 12351:2009 | Road vehicles - Determination of head contact and duration in impact tests | ||||
| KS R ISO 12350:2005 | Road vehicles - Injury risk curves for evaluation ofoccupant protection in side impact | ||||
| KS R ISO 12349-2:2004 | Road vehicles - Dummies for restraint system testing - Part 2:Child dummies | ||||
| KS R ISO 12349-1:2004 | Road vehicles - Dummies for restraint system testing - Part 1:Adult dummies | ||||
| KS R ISO 12345:2005 | Diesel engines - Cleanliness assessment of fuel injection equipment | ||||
| KS R ISO 12214:2014 | Road vehicles — Direction-of-motion stereotypes for automotive hand controls | ||||
| KS R ISO 12161:2008 | Road vehicles - Endurance braking systems ofmotor vehicles and towed vehicles - Test procedures | ||||
| KS R ISO 12103-2:2004 | Road vehicles - Test dust for filter evaluation - Part 2:Aluminium oxide test dust | ||||
| KS R ISO 12103-1:2004 | Road vehicles - Test dust for filter evaluation - Part 1:Arizona test dust | ||||
| KS R ISO 12097-2:2013 | Road vehicles ? Airbag components ? Part 2: Testing of airbag modules | ||||
| KS R ISO 12097-3:2008 | Road vehicles - Airbag components - Part 3:Testing of inflator assemblies | ||||
| KS R ISO 13215-1:2008 | Road vehicles - Reduction of misuse risk of child restraint systems - Part 1:Forms for field studies | ||||
| KS R ISO 13486-1:2005 | Road vehicles - Hydraulic braking systems - Part 1:Double-flare pipes, tapped holes, male fittings and tube seats | ||||
| KS R ISO 13476:2002 | Road vehicles - Ignition coils - Electrical characteristics and test methods |
若您对上表中数据有任何疑问，请与网站联系。
