(清空日期可显示全部记录)
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| NEN EN ISO 11446:2004 | Road Vehicles - Connectors For The Electrical Connection Of Towing And Towed Vehicles - 13-pole Connectors For Vehicles With 12 V Nominal Supply Voltage | ||||
| NEN EN ISO 11439:2013 | Gas Cylinders - High Pressure Cylinders For The On-Board Storage Of Natural Gas As A Fuel For Automotive Vehicles | ||||
| NEN ISO 11451-2:2015 | Road Vehicles - Vehicle Test Methods For Electrical Disturbances From Narrowband Radiated Electromagnetic Energy - Part 2: Off-Vehicle Radiation Sources | ||||
| NEN ISO 11452-10:2009 | Road Vehicles - Component Test Methods For Electrical Disturbances From Narrowband Radiated Electromagnetic Energy - Part 10: Immunity To Conducted Disturbances In The Extended Audio Frequency Range | ||||
| NEN ISO 11451-1:2015 | Road Vehicles - Vehicle Test Methods For Electrical Disturbances From Narrowband Radiated Electromagnetic Energy - Part 1: General Principles And Terminology | ||||
| NEN ISO 11452-1:2015 | Road Vehicles - Component Test Methods For Electrical Disturbances From Narrowband Radiated Electromagnetic Energy - Part 1: General Principles And Terminology | ||||
| NEN ISO 11451-4:2013 | Road Vehicles - Vehicle Test Methods For Electrical Disturbances From Narrowband Radiated Electromagnetic Energy - Part 4: Bulk Current Injection (Bci) | ||||
| NEN ISO 11451-3:2015 | Road Vehicles - Vehicle Test Methods For Electrical Disturbances From Narrowband Radiated Electromagnetic Energy - Part 3: On-Board Transmitter Simulation | ||||
| NEN ISO 11452-3:2001 | Road Vehicles - Component Test Methods For Electrical Disturbances From Narrowband Radiated Electromagnetic Energy - Part 3: Transverse Electromagnetic (tem) Cell | ||||
| NEN ISO 11452-2:1996 | Road Vehicles - Electrical Disturbances By Narrowband Radiated Electromagnetic Energy - Component Test Methods - Part 2: Absorber-lined Chamber | ||||
| NEN ISO 11452-4:2005 | Road Vehicles - Component Test Methods For Electrical Disturbances From Narrowband Radiated Electromagnetic Energy - Part 4: Bulk Current Injection (bci) | ||||
| NEN ISO 11452-5:2002 | Road Vehicles - Component Test Methods For Electrical Disturbances From Narrowband Radiated Electromagnetic Energy - Part 5: Stripline | ||||
| NEN ISO 11452-8:2015 | Road Vehicles - Component Test Methods For Electrical Disturbances From Narrowband Radiated Electromagnetic Energy - Part 8: Immunity To Magnetic Fields | ||||
| NEN ISO 11452-7:2004 | Road Vehicles - Component Test Methods For Electrical Disturbances From Narrowband Radiated Electromagnetic Energy - Part 7: Direct Radio Frequency (rf) Power Injection | ||||
| NEN ISO 11452-6:1998 | Road Vehicles; Electrical Disturbances By Narrowband Radiated Electromagnetic Energy; Component Test Methods - Part 6: Parallel Plate Antenna | ||||
| NEN ISO 11486:2006 | Motorcycles - Methods For Setting Running Resistance On A Chassis Dynamometer | ||||
| NEN ISO 11460:2007 | Two-wheeled Motorcycles - Positioning Of Lighting And Light-signalling Devices | ||||
| NEN ISO 11555-1:2003 | Road Vehicles - Stabilizing Devices For Caravans And Light Trailers - Part 1: Integrated Stabilizers | ||||
| NEN ISO 11614:1999 | Reciprocating Internal Combustion Compression-ignition Engines - Apparatus For Measurement Of The Opacity And For Determination Of The Light Absorption Coefficient Of Exhaust Gas | ||||
| NEN ISO 11565:2007 | Road Vehicles - Spark-plugs - Test Methods And Requirements | ||||
| NEN ISO 11748-2:2001 | Road Vehicles - Technical Documentation Of Electrical And Electronic Systems - Part 2: Documentation Agreement | ||||
| NEN ISO 11748-1:2001 | Road Vehicles - Technical Documentation Of Electrical And Electronic Systems - Part 1: Content Of Exchanged Documents | ||||
| NEN ISO 11748-3:2002 | Road Vehicles - Technical Documentation Of Electrical And Electronic Systems - Part 3: Application Example | ||||
| NEN NPR ISO/TR 11842:1997 | Road Vehicles - Comparison Of Statutory Photometric Requirements In Various Countries For Lighting Devices | ||||
| NEN ISO 11835:2003 | Road Vehicles - Motor Vehicles With Antilock Braking Systems (abs) - Measurement Of Braking Performance | ||||
| NEN ISO 1185:2003 | Road Vehicles - Connectors For The Electrical Connection Of Towing And Towed Vehicles - 7-pole Connector Type 24 N (normal) For Vehicles With 24 V Nominal Supply Voltage | ||||
| NEN ISO 11898-4:2004 | Road Vehicles - Controller Area Network (can) - Part 4: Time-triggered Communication | ||||
| NEN ISO 11898-3:2006 | Road Vehicles - Controller Area Network (can) - Part 3: Low-speed, Fault-tolerant, Medium-dependent Interface | ||||
| NEN ISO 11898-2:2003 | Road Vehicles - Controller Area Network (can) - Part 2: High-speed Medium Access Unit | ||||
| NEN ISO 11898-1:2015 | Road Vehicles - Controller Area Network (Can) - Part 1: Data Link Layer And Physical Signalling | ||||
| NEN ISO 11898-6:2013 | Road Vehicles - Controller Area Network (Can) - Part 6: High-Speed Medium Access Unit With Selective Wake-Up Functionality | ||||
| NEN ISO 11898-5:2007 | Road Vehicles - Controller Area Network (can) - Part 5: High-speed Medium Access Unit With Low-power Mode | ||||
| NEN ISO 11992-3:2003 | Road Vehicles - Interchange Of Digital Information On Electrical Connections Between Towing And Towed Vehicles - Part 3: Application Layer For Equipment Other Than Brakes And Running Gear | ||||
| NEN ISO 11992-2:2014 | Road Vehicles - Interchange Of Digital Information On Electrical Connections Between Towing And Towed Vehicles - Part 2: Application Layer For Brakes And Running Gear | ||||
| NEN ISO 11992-1:2003 | Road Vehicles - Interchange Of Digital Information On Electrical Connections Between Towing And Towed Vehicles - Part 1: Physical Layer And Data-link Layer | ||||
| NEN ISO 12046:1995 | Synchronous Belt Drives; Automotive Belts; Determination Of Physical Properties | ||||
| NEN ISO 11992-4:2014 | Road Vehicles - Interchange Of Digital Information On Electrical Connections Between Towing And Towed Vehicles - Part 4: Diagnostic Communication | ||||
| NEN ISO 12097-3:2003 | Road Vehicles - Airbag Components - Part 3: Testing Of Inflator Assemblies | ||||
| NEN ISO 12097-2:1996 | Road Vehicles; Airbag Components - Part 2: Testing Of Airbag Modules | ||||
| NEN ISO 12097-1:2003 | Road Vehicles - Airbag Components - Part 1: Vocabulary | ||||
| NEN NPR ISO/TS 12104:2005 | Road Vehicles - Gearshift Patterns - Manual Transmissions With Power-assisted Gearchange And Automatic Transmissions With Manual-gearshift Mode | ||||
| NEN ISO 12098:2004 | Road Vehicles - Connectors For The Electrical Connection Of Towing And Towed Vehicles - 15-pole Connector For Vehicles With 24 V Nominal Supply Voltage | ||||
| NEN EN ISO 12156-1:2006 | Diesel Fuel - Assessment Of Lubricity Using The High-frequency Reciprocating Rig (hfrr) - Part 1: Test Method | ||||
| NEN EN 12195-2:2000 | Load Restraint Assemblies On Road Vehicles - Safety - Part 2: Web Lashing Made From Man-made Fibres | ||||
| NEN ISO 12161:2006 | Road Vehicles - Endurance Braking Systems Of Motor Vehicles And Towed Vehicles - Test Procedures | ||||
| NEN ISO 12219-1:2012 | Interior Air Of Road Vehicles - Part 1: Whole Vehicle Test Chamber - Specification And Method For The Determination Of Volatile Organic Compounds In Cabin Interiors | ||||
| NEN ISO 12214:2002 | Road Vehicles - Direction-of-motion Stereotypes For Automotive Hand Controls | ||||
| NEN NPR ISO/TR 12204:2012 | Road Vehicles - Ergonomic Aspects Of Transport Information And Control Systems - Introduction To Integrating Safety Critical And Time Critical Warning Signals | ||||
| NEN ISO 12219-5:2014 | Interior Air Of Road Vehicles - Part 5: Screening Method For The Determination Of The Emissions Of Volatile Organic Compounds From Vehicle Interior Parts And Materials - Static Chamber Method | ||||
| NEN ISO 12219-3:2012 | Interior Air Of Road Vehicles - Part 3: Screening Method For The Determination Of The Emissions Of Volatile Organic Compounds From Vehicle Interior Parts And Materials - Micro-Scale Chamber Method |
若您对上表中数据有任何疑问,请与网站联系。