行业标准数据检索

SANS 20023 Ed. 3 (2012)

Uniform Provisions Concerning The Approval Of Reversing Lights For Power-Driven Vehicles And Their Trailers

SANS 20021 Ed. 1 (1993/R2014)

Uniform Provisions Concerning The Approval Of Vehicles With Regard To Their Interior Fittings

SANS 20022 Ed. 2 (2005/R2010)

Uniform Provisions Concerning The Approval Of Protective Helmets And Of Their Visors For Drivers And Passengers Of Motor Cycles And Mopeds

SANS 20020 Ed. 2 (2008/R2013)

Uniform Provisions Concerning The Approval Of Motor Vehicle Headlamps Emitting An Asymmetrical Passing Beam Or A Driving Beam Or Both And Equipped With Halogen Filament Lamps (H4 Lamps)

SANS 20019 Ed. 3 (2012)

Uniform Provisions Concerning The Approval Of Power-Driven Vehicle Front Fog Lamps

SANS 20065 Ed. 1 (2007)

Uniform Provisions Concerning The Approval Of Special Warning Lamps For Power-driven Vehicles And Their Trailers

SANS 20064 Ed. 1 (2007)

Temporary-use Spare Wheels/tyres

SANS 20063 Ed. 1 (2004)

Uniform Provisions Concerning The Approval Of Two-wheeled Mopeds With Regard To Noise

SANS 20062 Ed. 1 (2007/R2012)

Uniform Provisions Concerning The Approval Of Power-Driven Vehicles With Handlebars With Regard To Their Protection Against Unauthorized Use

SANS 20060 Ed. 1 (2007/R2012)

Uniform Provisions Concerning The Approval Of Two-Wheeled Motor Cycles And Mopeds With Regard To Driver-Operated Controls Including The Identification Of Controls, Tell-Tales And Indicators

SANS 20059 Ed. 1 (2007)

Uniform Provisions Concerning The Approval Of Replacement Silencing Systems

SANS 20055 Ed. 1 (2003)

Uniform Provisions Concerning The Approval Of Mechanical Coupling Components Of Combinations Of Vehicles

SANS 20052 Ed. 2 (2009)

Uniform Provisions Concerning The Approval Of M2 And M3 Small Capacity Vehicles With Regard To Their General Construction

SANS 20050 Ed. 2 (2007)

Uniform Provisions Concerning The Approval Of Front Position Lamps, Rear Position Lamps, Stop Lamps, Direction Indicators And Rear-registration-plate Illuminating Devices For Vehicles Of Category L

SANS 20048 Ed. 3 (2009)

Uniform Provisions Concerning The Approval Of Vehicles With Regard To The Installation Of Lighting And Light-signalling Devices

SANS 20046 Ed. 2 (2006)

Uniform Provisions Concerning The Approval Of Devices For Indirect Vision And Of Motor Vehicles With Regard To The Installation Of These Devices

SANS 20072 Ed. 1 (1988/R2013)

Uniform Provisions Concerning The Approval Of Motor Cycle Headlamps Emitting An Asymmetrical Passing Beam And A Driving Beam And Equipped With Halogen Filament Lamps (Hs1)

SANS 20070 Ed. 2 (2010)

Uniform Provisions Concerning The Approval Of Rear Marking Plates For Heavy And Long Vehicles

SANS 20069 Ed. 2 (2010)

Uniform Provisions Concerning The Approval Of Rear Marking Plates For Slow-Moving Vehicles (By Construction) And Their Trailers

SANS 20067 Ed. 2 (2006/R2009)

Uniform Provisions Concerning 1 - Approval Of Specific Equipment Of Motor Vehicles Using Liquefied Petroleum Gases In Their Propulsion System; 2 - Approval Of A Vehicle Fitted With Specific Equipment For The Use Of Liquefied Petroleum Gases In Its Propuls

SANS 20091 Ed. 2 (2007)

Uniform Provisions Concerning The Approval Of Side-marker Lamps For Motor Vehicles And Their Trailers

SANS 20089 Ed. 1 (2006/R2009)

Uniform Prescriptions For Approval Of: 1 - Vehicles With Regard To Limitation Of Their Maximum Speed Or Their Adjustable Speed Limitation Function: 2 - Vehicles With Regard To The Installation Of A Speed Limiting Device (sld) Or Adjustable Speed Limitatio

SANS 20087 Ed. 1 (2005)

Uniform Provisions Concerning The Approval Of Daytime Running Lamps For Power-driven Vehicles

SANS 20088 Ed. 1 (2007)

Uniform Provisions Concerning The Approval Of Retroreflective Tyres For Two-wheeled Vehicles

SANS 20084 Ed. 1 (2004)

Uniform Provisions Concerning The Approval Of Passenger Cars Equipped With An Internal Combustion Engine With Regard To The Measurement Of Fuel Consumption

SANS 20082 Ed. 1 (1989/R2013)

Uniform Provisions Concerning The Approval Of Moped Headlamps Equipped With Filament Halogen Lamps (Hs2 Lamps)

SANS 20081 Ed. 1 (1989/R2014)

Uniform Provisions Concerning The Approval Of Rear-view Mirrors And Of Two-wheeled Power-driven Vehicles With Or Without Side Car, With Regard To The Installation Of Rear-view Mirrors On Handlebars

SANS 20080 Ed. 1 (1989/R2009)

Uniform Provisions Concerning The Approval Of Seats Of Large Passenger Vehicles And Of These Vehicles With Regard To The Strength Of The Seats And Their Anchorages

SANS 20078 Ed. 2 (2008)

Uniform Provisions Concerning The Approval Of Vehicles Of Categories L1, L2, L3, L4 And L5 With Regard To Braking

SANS 20119 Ed. 1 (2008)

Uniform Provisions Concerning The Approval Of Cornering Lamps For Power-driven Vehicles

SANS 20107 Ed. 3 (2009)

Uniform Provisions Concerning The Approval Of Category M2 Or M3 Vehicles With Regard To Their General Construction

SANS 20112 Ed. 2 (2011)

Uniform Provisions Concerning The Approval Of Motor Vehicle Headlamps Emitting An Asymmetrical Passing Beam Or A Driving Beam Or Both And Equipped With Filament Lamps And/Or Light-Emitting Diode (Led) Modules

SANS 20098 Ed. 2 (2007)

Uniform Provisions Concerning The Approval Of Motor Vehicle Headlamps Equipped With Gas-discharge Light Sources

SANS 20096 Ed. 2 (2009)

Uniform Provisions Concerning The Approval Of Compression Ignition (c.i.) Engines To Be Installed In Agricultural And Forestry Tractors And In Non-road Mobile Machinery With Regard To The Emissions Of Pollutants By The Engine

SANS 20094 Ed. 1 (2009)

Uniform Provisions Concerning The Approval Of Vehicles With Regard To The Protection Of The Occupants In The Event Of A Frontal Collision

SANS 20124 Ed. 1 (2007)

Uniform Provisions Concerning The Approval Of Wheels For Passenger Cars And Their Trailers

SANS 205 Ed. 2 (2009)

Road Vehicles - Elastomeric Cups And Seals For Cylinders For Hydraulic Braking Systems Using A Non-petroleum Base Hydraulic Brake Fluid (service Temperature 70 Degrees C Max.)

SANS 206 Ed. 2 (2009)

Road Vehicles - Elastomeric Seals For Hydraulic Disc Brake Cylinders Using A Non-petroleum Base Hydraulic Brake Fluid (service Temperature 120 Degrees C Max.)

SANS 20826 Ed. 1 (2010)

Automotive Lpg Components - Containers

SANS 20076 Ed. 1 (1988/R2013)

Uniform Provisions Concerning The Approval Of Headlamps For Mopeds Emitting A Driving Beam And A Passing Beam

SANS 23273-2 Ed. 1 (2010/R2015)

Fuel Cell Road Vehicles - Safety Specifications - Part 2: Protection Against Hydrogen Hazards For Vehicles Fuelled With Compressed Hydrogen

SANS 23273-1 Ed. 1 (2010/R2015)

Fuel Cell Road Vehicles - Safety Specifications - Part 1: Vehicle Functional Safety

SANS 23273-3 Ed. 1 (2010/R2015)

Fuel Cell Road Vehicles - Safety Specifications - Part 3: Protection Of Persons Against Electric Shock

SANS 23274 Ed. 1 (2010/R2015)

Hybrid-Electric Road Vehicles - Exhaust Emissions And Fuel Consumption Measurements - Non-Externally Chargeable Vehicles

SANS 24135-1 Ed. 1 (2007/R2014)

Industrial Trucks - Specifications And Test Methods For Operator Restraint Systems - Part 1: Lap-Type Seat Belts

SANS 23828 Ed. 1 (2010/R2015)

Fuel Cell Road Vehicles - Energy Consumption Measurement - Vehicles Fuelled With Compressed Hydrogen

SANS 26866 Ed. 1 (2010)

Road Vehicles - Brake Lining Friction Materials - Standard Wear Test Procedure For Commercial Vehicles With Air Brakes

SANS 27955 Ed. 1 (2011)

Road Vehicles - Securing Of Cargo In Passenger Cars, Station Wagons And Multi-Purpose Vehicles - Requirements And Test Methods

SANS 311 Ed. 2 (2007/R2012)

Category L Motor Vehicles

SANS 3780 Ed. 2 (2010)

Road Vehicles - World Manufacturer Identifier (Wmi) Code