行业标准数据检索

SS ISO 8820-10 Ed. 1 (2015)

Road Vehicles - Fuse-Links - Part 10: Fuse-Links With Tabs Type L (High Current Miniature) (Iso 8820-10:2015, Idt)

SS ISO 8820-1 Ed. 2 (2014)

Road Vehicles - Fuse-Links - Part 1: Definitions And General Test Requirements (Iso 8820-1:2014, Idt)

SS ISO 8820-5 Ed. 1 (2015)

Road Vehicles - Fuse-Links - Part 5: Fuse-Links With Axial Terminals (Strip Fuse-Links) Types Sf 30 And Sf 51 And Test Fixtures (Iso 8820-5:2015, Idt)

SS ISO 8820-4 Ed. 1 (2011)

Road Vehicles - Fuse-Links - Part 4: Fuse-Links With Female Contacts (Type A) And Bolt-In Contacts (Type B) And Their Test Fixtures

SS ISO 8854 Ed. 2 (2012)

Road Vehicles - Alternators With Regulators - Test Methods And General Requirements (Iso 8854:2012, Idt)

SS ISO 8853 Ed. 1 (1991)

Safety Harnesses For Competition Drivers - Requirements And Test Methods

SS ISO 8820-8 Ed. 1 (2012)

Road Vehicles - Fuse-Links - Part 8: Fuse-Links With Bolt-In Contacts (Type H And J) With Rated Voltage Of 450 V (Iso 8820-8:2012, Idt)

SS ISO 8820-9 Ed. 1 (2014)

Road Vehicles - Fuse-Links - Part 9: Fuse-Links With Shortened Tabs (Type K) (Iso 8820-9:2014, Idt)

SS ISO 8855 Ed. 2 (2011)

Road Vehicles - Vehicle Dynamics And Road-Holding Ability - Vocabulary (Iso 8855:2011, Idt)

SS ISO 8856 Ed. 3 (2014)

Road Vehicles - Electrical Performance Of Starter Motors - Test Methods And General Requirements (Iso 8856:2014, Idt)

SS ISO 8984-1 Ed. 2 (2007)

Diesel Engines - Testing Of Fuel Injectors - Part 1: Hand-lever-operated Testing And Setting Apparatus

SS EN ISO 8936 Ed. 1 (2009)

Awnings For Leisure Accommodation Vehicles - Requirements And Test Methods

SS ISO 8984-2 Ed. 2 (2007)

Diesel Engines - Testing Of Fuel Injectors - Part 2: Test Methods

SS ISO 9021 Ed. 1 (1989)

Motorcycles - Controls - Types, Positions And Functions

SS ISO 9103 Ed. 1 (1989)

Road Vehicles - Compression-ignition Engines - Screw-in Injection Nozzle Holder, Type 23

SS ISO 9102 Ed. 2 (2005)

Diesel Engines - Screw-in Injection Nozzle Holders, Types 24, 25, 26 And 26.1

SS ISO 9132 Ed. 1 (1991)

Three-wheeled Mopeds And Motorcycles - Masses - Vocabulary

SS ISO 9128 Ed. 2 (2006)

Road Vehicles - Graphical Symbols To Designate Brake Fluid Types

SS ISO 9158 Ed. 1 (1989)

Road Vehicles - Nozzle Spouts For Unleaded Gasoline

SS ISO 9141-3 Ed. 1 (1999)

Road Vehicles - Diagnostic Systems - Part 3: Verification Of The Communication Between Vehicle And Obd 2 Scan Tool

SS ISO 9141-2 Ed. 1 (1999)

Road Vehicles - Diagnostic Systems - Part 2: Carb Requirements For Requirements For Interchange Of Digital Information

SS ISO 9141 Ed. 1 (1991)

Road Vehicles - Diagnostic Systems - Requirements For Interchange Of Digital Information

SS ISO 9159 Ed. 1 (1989)

Road Vehicles - Nozzle Spouts For Leaded Gasoline And Diesel Fuel

SS ISO 9258 Ed. 1 (1991)

Passenger Cars - Wiper Systems - Wiper Blade Length

SS ISO 9367-2 Ed. 1 (1994)

Lashing And Securing Arrangements On Road Vehicles For Sea Transportation On Ro/ro Ships - General Requirements - Part 2: Semi-trailers

SS ISO 9367-1 Ed. 1 (1991)

Lashing And Securing Arrangements On Road Vehicles For Sea Transportation On Ro/ro Ships - General Requirements - Part 1: Commercial Vehicles And Combination Of Vehicles, Semi-trailers Excluded

SS ISO 9457-1 Ed. 1 (1992)

Road Vehicles - Metric Starter Motor Pinions - Part 1: Currently Used Pinions

SS ISO 9458 Ed. 1 (1989)

Passenger Cars - Starter Motor Electrical Connections

SS ISO 9457-2 Ed. 1 (1995)

Road Vehicles - Metric Starter Motor Pinions - Part 2: Pinions With 20 Degrees Pressure Angle

SS ISO 9534 Ed. 1 (1991)

Road Vehicles - Fuel Pump Electric Connections

SS ISO 9633 Ed. 2 (2007)

Cycle Chains - Characteristics And Test Methods

SS ISO 9815 Ed. 3 (2010)

Road Vehicles - Passenger-Car And Trailer Combinations - Lateral Stability Test

SS ISO 9816 Ed. 2 (2006)

Passenger Cars - Power-off Reaction Of A Vehicle In A Turn - Open-loop Test Method

SS 998 Ed. 3 (1985)

Road Vehicles - 50 Semi-trailer Fifth Wheel Coupling Pin For Vertical Forces Up To And Including 180 Kn

SS 997 Ed. 3 (1990)

Road Vehicles - Mechanical Couplings Rear Cross Member - Mounting Dimensions

SMS 995 Ed. 2 (1974)

Automobiles - Terminology For Mechanical Couplings Between Tractors And Their Trailers

SS 999 Ed. 3 (1985)

Road Vehicles - 90 Semi-trailers Fifth Wheel Coupling Pin For Vertical Forces Over 180 Kn

SIS CEN/TS 13149-6 Ed. 1 (2006)

Public Transport - Road Vehicle Scheduling And Control Systems - Part 6: Can Message Content

SIS CEN/TS 13149-3 Ed. 1 (2007)

Public Transport - Road Vehicle Scheduling And Control Systems - On-board Data Transmission Interfaces - Part 3: Worldfip Message Content

SIS CEN/TR 16596 Ed. 1 (2013)

Electric-Electronic Interface Between Chassis-Cab And Bodywork Of Refuse Collection Vehicles (Rcvs)

SIS CEN/TR 16044 Ed. 1 (2010)

Bicycles - Replies To Requests For Interpretation Of En 14781

SIS CEN/TR 16043 Ed. 1 (2010)

Bicycles - Replies To Requests For Interpretation Of En 14766

SIS CEN/TR 16042 Ed. 1 (2010)

Bicycles - Replies To Requests For Interpretation Of En 14765

SIS CWA 16697 Ed. 1 (2013)

Car-Adaptations For Disabled Drivers - Requirements, Test Methods And Best Practise Guidelines

SIS CEN/TS 15597-2 Ed. 1 (2012)

Winter Maintenance Equipment - Spreading Machines (Gritting Machines) - Part 2: Requirements For Distribution And Its Test

SIS CEN/TS 15436-3 Ed. 1 (2009)

Road Service Area Maintenance Equipment - Part 3: Classification

SIS CEN/TS 15430-2 Ed. 1 (2012)

Winter And Road Service Area Maintenance Equipment - Data Acquisition And Transmission - Part 2: Protocol For Data Transfer Between Information Supplier Server And Client Application Server

SIS ISO/TR 10982 Ed. 1 (2014)

Road Vehicles - Test Procedures For Evaluating Out-Of-Position Vehicle Occupant Interactions With Deploying Air Bags (Iso/Tr 10982:2013, Idt)

SIS ISO/PAS 3930 Ed. 1 (2010)

Instruments For Measuring Vehicle Exhaust Emissions - Metrological And Technical Requirements; Metrological Control And Performance Tests

SIS ISO/PAS 22574 Ed. 1 (2007)

Road Vehicles - Brake Linings Frictions Materials - Visual Inspection