(清空日期可显示全部记录)

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
Superplasticized Fly Ash Concrete for Structural Applications
Factors Influencing the Drying Shrinkage of Steel Fiber Reinforced Concrete
Characteristics of Lightweight Aggregates for High-Strength Concrete
Internal Cracking and Strain Softening Response of Concrete Under Uniaxial Compression
Physical and Chemical Properties of Municipal Solid Waste Fly Ash
Mechanical Properties, Creep, and Resistance to Diffusion of Chloride Ions of Concretes Incorporating High Volumes of ASTM Class F Fly Ashes from Seven Different Sources
Strain-Rate Sensitive Behavior of Cement Paste and Mortar in Compression
Concrete Mix Proportioning by Modified Fineness Modulus Method
Effect of Curing Regime on the Properties of Fly-Ash Concrete
Effect of Nitrite as a Corrosion Inhibitor in Contaminated and Chloride-Free Carbonated Mortar
It's Time for a Change from 6 x 12- to 3 x 6-in. Cylinders
Forest Hill Station--A Hole in the Wall
Prediction of Concrete Tensile Strength from its Compressive Strength: an Evaluation of Existing Relations for Normal Weight Concrete
Hot Weather Concreting
Analysis of Concrete Strength Versus Water-Cement Ratio Relationship
The DIN Flow Table
Deterioration of Concrete Bridge Decks from Corrosion of Reinforcing Steel
Statistical Extrapolation of Shrinkage Data--Part I: Regression
Shrinkage Cracking of Fiber Reinforced Concrete
Bayesian Technique for Evaluation of Material Strengths in Existing Bridges
Ultimate Drying Shrinkage of Concrete--Influence of Major Parameters
Durability of Fiber Reinforced Mortar
Criteria for Estimating the Required Average Strength f'cr to Comply with the Specified Compressive Strength f'c
Laboratory Investigation of Shear Repair of Reinforced Concrete Beams Loaded in Flexure
Effects of Loading History on Fracture Properties of Concrete
Shrinkage and Creep of High-, Medium-, and Low-Strength Concretes, Including Overloads
Time-Dependent Analysis of Concrete Structures with Variable Structural System
Accelerated Strength Testing of Portland-Pozzolan Cement Concretes by the Warm Water Method
Guide to the Selection and Use of Hydraulic Cements
Effect of Fly Ash Addition on the Corrosion Resisting Characteristics of Concrete
Mechanical Properties of Hardened Cement Paste Exposed to Temperatures up to 700 C (1292 F)
Behavior of Concrete Under Triaxial Compressive-Compressive-Tensile Stresses
Size Effect in Brazilian Split-Cylinder Tests: Measurements and Fracture Analysis
Laboratory Investigation of Concrete Sealers
Properties of High-Strength Concrete at Low Temperatures
Physical and Chemical Characteristics Affecting the Durability of Concrete
Three Chloride-Related Failures in Concrete Structures
Development Length of Epoxy-Coated Prestressing Strand
Interpretation of Quality-Control Charts for Concrete Production
Phosphogypsum-Based Roller Compacted Concrete
Simple Method for Measuring Water Permeability of Concrete
Long-Term Deflection of High-Strength Concrete Beams
Corrosion Case: Repair Procedure
Bond Effects in High-Strength Silica Fume Concretes
Silica Fume in PCC: The Effects of Form on Engineering Performance
Bond of Epoxy-Coated Reinforcement: Bar Parameters
Effect of Synthetic Fibers on Volume Stability and Cracking of Portland Cement Concrete and Mortar
Test Parameters for Evaluating Toughness of Glass Fiber Reinforced Concrete Panels
Sodium Thiocyanate and Corrosion of Steel in Concrete and Mortar
Effect of Water-Cement Ratio and Curing on Chloride Penetration into Concrete Exposed to Mediterranean Sea Climate

若您对上表中数据有任何疑问,请与网站联系。