(清空日期可显示全部记录)

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
Mixture Design, Strength, Durability, and Fire Resistance of Lightweight Pumice Concrete
Fly Ash: Cement Replacement or Mineral Admixture?
Strain Rate Effect on Bending Behavior of New Ultra-High-Performance Cement-Based Composite
CANMET/ACI International Conferences held in Poland
Evaluation of Shrinkage Prediction Models for Self-Consolidating Concrete
Mechanical and Fracture-Mechanical Properties of Asphalt-Concrete Interfaces
Heating Methods and Detection Limits for Infrared Thermography Inspection of Fiber-Reinforced Polymer Composites
Fresh and Hardened Properties of Self-Consolidating Fiber-Reinforced Concrete
Post-Peak Behavior of Cement-Based Materials in Compression
Modeling of Textile-Reinforced Concrete with Inclined Textile Orientation
Modeling Local Pressure on Inclined Rovings in Textile-Reinforced Concrete
Tailoring Extruded HPFRCC to be Nailable
High-Volume Natural Pozzolan Concrete for Structural Applications
Closed-Form Solution for Predicting Elastic Modulus of Concrete
Discussion from the November-December 2006 ACI Materials Journal/Page 444 (103-M49)
Engineering Concrete Performance
From Passive to Active Thermal Control
A New Fix for Loose Slab Joints
Reliable Air Entrainment
An Investigation of Low-Strength CMU
Strut-and-Tie Model Analysis for Strength Prediction of Deep Beams
ACI Officers Nominated for 2008-2009
Experimental Evaluation of Factors Affecting Monotonic and Fatigue Behavior of Fiber-Reinforced Polymer-to-Concrete Bond in Reinforced Concrete Beams
Over the Neighbors
Concepts Underlying Reinforced Concrete Design: Time for Reappraisal
Bond Stresses Along Plain Steel Reinforcing Bars in Pullout Specimens
Fiber-Reinforced Polymer Confined Rectangular Columns: Assessment of Models and Design Guidelines
Specifiers' Product Guide
Ductility of Flat Plates: Comparison of Shear Reinforcement Systems
Flat Plates in Seismic Areas: Comparison of Shear Reinforcement Systems
Structural Behavior of Fiber-Reinforced Polymer-Autoclaved Aerated Concrete Panels
Experimental and Analytical Progressive Collapse Evaluation of Actual Reinforced Concrete Structure
ACI's Strategic Plan
Textile-Reinforced Mortar versus Fiber-Reinforced Polymer Confinement in Reinforced Concrete Columns
Experimental Verification of Strut and Tie Model Design Method
Behavior of Corroded Bar Anchorages
Response of Concrete to Dynamic Elevated-Amplitude Cyclic Tension
Transport Properties of Engineered Cementitious Composites under Chloride Exposure
Measuring Chloride Concentrations for Various Cement-Based Materials Systems
Experimental Testing to Determine Concrete Fracture Energy Using Simple Laboratory Test Setup
Sodium Sulfate Resistance of Fast-Track Portland Cement Concretes
Models for Corrosion-Induced Bond Strength Degradation in Reinforced Concrete
18th Annual Excellence in Concrete Pavement Awards
Role of Steel and Cement Type on Chloride-Induced Corrosion in Concrete
Use of High Volumes of Fly Ash to Improve ECC Mechanical Properties and Material Greenness
Use of Alternative Materials to Reduce Shrinkage Cracking in Bridge Decks
On-Site Measurements on Corrosion Rate of Steel in Reinforced Concrete
A Whitetopped Driveway
Influence of Environmental Exposure Conditions on Mechanical Properties of High-Strength Concrete
Strength Optimization of Novel Binder Containing Plasterboard Gypsum Waste

若您对上表中数据有任何疑问,请与网站联系。