（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| Q/HD-303.10001-2012 | 公安科长工作标准 | 2012-01-01 | 2012-01-01 | 2015-08-01 | |
| ISO 3046-4-1997 | Reciprocating internal combustion engines -- Performance -- Part 4: Speed governing | ||||
| ISO 3046-4-2009 | Reciprocating internal combustion engines -Performance - Part 4: Speed governing | 2009-12-01 | |||
| ISO 17638-2003 | Non-destructive testing of welds - Magnetic particle testing | ||||
| ISO 1496-1-2013 | Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes | ||||
| ISO 23277-2006 | Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels | ||||
| ISO 5948-1994 | Railway rolling stock material - Ultrasonic acceptance testing | ||||
| IEC 60521-1988 | Class 0.5, 1 and 2 Alternating-Current Watthour Meters | ||||
| ISO 1005/2-1986 | Railway rolling stock material - Part 2: Tyres, wheel centres and tyred wheels for tractive and trailing stock - Dimensional, balancing and assembly requirements | ||||
| ISO 6524-1992 | Plain Bearings - Thin-Walled Half-Bearings - Checking of Peripheral Length | ||||
| UIC 810-2-1985 | Technical Specification For The Supply Of Rough Tyres For Tractive And Trailing Stock - Tolerances | ||||
| IEC/TS 60815-1-2008 | Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 1: Definitions, information and general principles | ||||
| IEC/TS 60815-2-2008 | Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 2: Ceramic and glass insulators for a.c. systems | ||||
| IEC/TS 60815-3-2008 | Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 3: Polymer insulators for a.c. systems | ||||
| ISO 10767-1-1996 | Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 1: Precision method for pumps | ||||
| ISO 10767-2-1999 | Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 2: Simplified method for pumps | ||||
| ISO 10767-3-1999 | Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 3: Method for motors | ||||
| ISO 3046-1-1995 | Reciprocating internal combustion engines - Performance - Part 1: Standard reference conditions, declarations of power, fuel and lubricating oil consumptions, and test methods | ||||
| ISO 8535-1-2006 | Diesel engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes | ||||
| IEC 61109-1992 | INSULATORS FOR OVERHEAD LINES - COMPOSITE SUSPENSION AND TENSION INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1 000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA | ||||
| ISO 7183-1986 | Compressed air dryers - Specifications and testing | 1986-03-13 | |||
| ISO 3874-1988 | Series 1 freight containers - Handling and securing | 1988-07-21 | |||
| IEC 60383-1-1993 | Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Part 1: Ceramic or Glass Insulator Units for A.C. Systems - Definitions, Test Methods and Acceptance Criteria | ||||
| ISO 8573-1-2001 | Compressed air - Part 1: Contaminants and purity classes | 2001-02-01 | |||
| IEC 61377-1996 | Electric Traction - Rolling Stock - Combined Testing of Inverter-Fed Alternating Current Motors and Their Control | ||||
| ISO 8573-4-2001 | Compressed air - Part 4: Test methods for solid particle content | 2001-06-15 | |||
| ISO 8573-5-2001 | Compressed air - Part 5: Test methods for oil vapour and organic solvent content | 2001-12-15 | |||
| IEC 61109 AMD.1-1995 | INSULATORS FOR OVERHEAD LINES - COMPOSITE SUSPENSION AND TENSION INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1 000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA | ||||
| IEC 60168-1994 | Tests on Indoor and Outdoor Post Insulators of Ceramic Material or Glass for Systems with Nominal Voltages Greater Than 1 000 V | ||||
| ISO 6524-1983 | PLAIN BEARINGS - THIN-WALLED HALF-BEARINGS - CHECKING OF PERIPHERAL LENGTH *** SAME AS BS 7675 *** | ||||
| ISO 3548-3-2012 | Plain bearings - Thin-walled half bearings with or without flange - Part 3: Measurement of peripheral length | ||||
| 建标[2016]248号 | 关于印发2017年工程建设标准规范制修订及相关工作计划的通知 | 2016-11-10 | 2016-11-10 | ||
| Q/HD-221.05-2011 | 标准化管理标准 | 2011-08-01 | 2011-08-01 | ||
| 建办市函[2016]1063号 | 关于开展清理规范工程建设领域保证金专项督查的通知 | 2016-12-08 | 2016-12-08 | ||
| Q/HD-221.01-2011 | 工程管理标准 | 2011-08-01 | 2011-08-01 | ||
| ISO 7146-2-2008 | Plain bearings - Appearance and characterization of damage to metallic hydrodynamic bearings - Part 2: Cavitation erosion and its countermeasures | ||||
| Q/HD-221.03-2011 | 安全生产管理标准 | 2011-08-01 | 2011-08-01 | ||
| ISO 7146-1-2008 | Plain bearings - Appearance and characterization of damage to metallic hydrodynamic bearings - Part 1: General | ||||
| Q/HD-221.02-2011 | 技术管理标准 | 2011-07-31 | 2011-07-31 | ||
| ISO 3046-7-1995 | Reciprocating internal combustion engines - Performance - Part 7: Codes for engine power | ||||
| IEC 61109-2008 | Insulators for overhead lines – Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V – Definitions, test methods and acceptance criteria | ||||
| ISO 8535-1-2011 | Diesel engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes | ||||
| Q/HD-221.06-2011 | 文明生产管理标准 | 2011-08-01 | 2011-08-01 | ||
| 建市[2016]261 号 | 关于促进建筑工程设计事务所发展有关事项的通知 | 2016-11-24 | 2017-03-01 | ||
| Q/HD-303.11001-2011 | 安监部主任工作标准 | 2011-01-01 | 2011-01-01 | 2015-08-01 | |
| ISO 4383-1991 | Plain bearings - Multilayer materials for thin-walled plain bearings | ||||
| 建房[2016]275号 | 关于贯彻落实资产评估法规范房地产估价行业管理有关问题的通知 | 2016-12-06 | 2016-12-06 | ||
| Q/HD-304.11011-2011 | 安监专工工作标准 | 2011-01-01 | 2011-01-01 | 2015-08-01 | |
| Q/HD-301.11013-2011 | 班组安全员通用工作标准 | 2011-01-01 | 2011-01-01 | 2015-08-01 | |
| ISO/WD 5948 | Railway rolling stock material - Ultrasonic acceptance testing |
若您对上表中数据有任何疑问，请与网站联系。
