（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 60633:1998+AMD1:2009+AMD2:2015 CSV | Terminology for high-voltage direct current (HVDC) transmission | ||||
| IEC 60633:1998/AMD1:2009 | Amendment 1 - Terminology for high-voltage direct current (HVDC) transmission | ||||
| IEC 60633:1998 | Terminology for high-voltage direct current (HVDC) transmission | ||||
| IEC TS 61464:1998 | Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregating medium of the main insulation (generally paper) | ||||
| IEC 61643-21:2000+AMD1:2008 CSV | Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods | ||||
| IEC 61180:2016 | High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment | ||||
| IEC 62271-102:2001/AMD1:2011 | Amendment 1 - High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches | ||||
| IEC 62271-102:2001+AMD1:2011 CSV | High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches | ||||
| IEC 62271-1:2007+AMD1:2011 CSV | High-voltage switchgear and controlgear - Part 1: Common specifications | ||||
| IEC 62271:2016 SER | High-voltage switchgear and controlgear - ALL PARTS | ||||
| IEC TR 62063:1999 | High-voltage switchgear and controlgear - The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear | ||||
| IEC 61204-3:2016 | Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) | ||||
| IEC 60086-2:2015 | Primary batteries - Part 2: Physical and electrical specifications | ||||
| IEC 60086-3:2016 | Primary batteries - Part 3: Watch batteries | ||||
| IEC TR 62422:2007 | Environmental characterization of solid insulating materials | ||||
| IEC 62011-1:2002 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements | ||||
| IEC 60838-2-3:2016 | Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps | ||||
| IEC 60838-2-2:2006+AMD1:2012 CSV | Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules | ||||
| IEC 62821-3:2015 | Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 3: Flexible cables (cords) | ||||
| IEC 62821-2:2015 | Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 2: Test methods | ||||
| IEC 60838-2-1:1994/AMD1:1998 | Amendment 1 - Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14 | ||||
| IEC TR 62602:2009 | Conductors of insulated cables - Data for AWG and KCMIL sizes | ||||
| IEC 62230:2006 | Electric cables - Spark-test method | ||||
| IEC 60838-1:2016+AMD1:2017 CSV | Miscellaneous lampholders - Part 1: General requirements and tests | ||||
| IEC 61212-2:2006 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test | ||||
| IEC 60399:2004/AMD1:2008 | Amendment 1 - Barrel thread for lampholders with shade holder ring | ||||
| IEC 60238:2016 | Edison screw lampholders | ||||
| IEC 61443:1999+AMD1:2008 CSV | Short-circuit temperature limits of electric cables with rated voltages above 30 kV (<i>U</i><sub>m</sub> = 36 kV) | ||||
| IEC 61238-1:2003 | Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) - Part 1: Test methods and requirements | ||||
| IEC 61138:2007 | Cables for portable earthing and short-circuiting equipment | ||||
| IEC 61034-2:2005/AMD1:2013 | Amendment 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements | ||||
| IEC 60238:2016+AMD1:2017 CSV | Edison screw lampholders | ||||
| IEC 60061-3C:1971 | Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges | ||||
| IEC 60893-3-2:2003/AMD1:2011 | Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins | ||||
| IEC 60061-2R:1996 | sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders | ||||
| IEC 60061-2H:1987 | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Eight supplement. | ||||
| IEC 60061-2P:1996 | Fourtheenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders | ||||
| IEC 60061-2J:1989 | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Ninth supplement. | ||||
| IEC 60061-2F:1980 | Sixth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | ||||
| IEC 60061-2D:1975 | fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders | ||||
| IEC 60061-1V:1997 | Twentieth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps | ||||
| IEC 60061-2A:1970 | first supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders | ||||
| ISO/IEC 8825-5:2004/COR1:2006 | Corrigendum 1 - Information technology -- ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 - | ||||
| ISO/IEC 8825-3:2002 | Information technology -- ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) | ||||
| ISO/IEC 8824-1:2008 | Information technology -- Abstract Syntax Notation One (ASN.1): Specification of basic notation | ||||
| ISO/IEC 8824-4:2008 | Information technology -- Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications | ||||
| ISO/IEC 8824-1:2008/COR1:2012 | Corrigendum 1 - Information technology -- Abstract Syntax Notation One (ASN.1): Specification of basic notation - | ||||
| ISO/IEC 29341-12-11:2008 | Information technology - UPnP Device Architecture - Part 12-11: Remote User Interface Device Control Protocol - Remote User Interface Server Service | ||||
| ISO/IEC 29341-12-1:2008 | Information technology - UPnP Device Architecture - Part 12-1: Remote User Interface Device Control Protocol - Remote User Interface Client Device | ||||
| ISO/IEC TR 18047-7:2005 | Information technology -- Radio frequency identification device conformance test methods -- Part 7: Test methods for active air interface communications at 433 MHz |
若您对上表中数据有任何疑问，请与网站联系。
