（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 60958-1:2004 | Digital audio interface - Part 1: General | ||||
| IEC 60728-1-2:2009 | Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for signals delivered at the system outlet in operation | ||||
| IEC 60315-1:1970 | Methods of measurement on radio receivers for various classes of emission - Part 1: General considerations for measurements and measuring methods applying to several types of receivers | ||||
| IEC 61760-1:1998 | Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs) | ||||
| IEC TR 60068-3-12:2007 | Environmental testing - Part 3-12: Supporting documentation and guidance - Method to evaluate a possible lead-free solder reflow temperature profile | ||||
| IEC 60695-11-10:1999/AMD1:2003 | Amendment 1 - Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods | ||||
| IEC TS 60695-9-2:2001 | Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods | ||||
| IEC TS 60695-6-2:2005 | Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods | ||||
| IEC 61400-25-3:2006 | Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models | ||||
| IEC 61400-2:1996 | Wind turbine generator systems - Part 2: Safety of small wind turbines | ||||
| IEC 62148-15:2009 | Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages | ||||
| IEC 60393-2-1:1989 | Potentiometers for use in electronic equipment. Part 2-1: Blank detail specification - Lead-screw actuated and rotary preset potentiometers - Assessment level E | ||||
| IEC 62148-11:2003 | Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters | ||||
| IEC 62007-1:1997 | Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Essential ratings and characteristics | ||||
| IEC 61757-1:1998 | Fibre optic sensors - Part 1: Generic specification | ||||
| IEC 61754-7:1996 | Fibre optic connector interfaces - Part 7:Type MPO connector family | ||||
| IEC 61300-2-28:1995 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Industrial atmosphere (sulphur dioxide) | ||||
| IEC 61300-2-19:1995 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) | ||||
| IEC 61300-2-12:1995 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact | ||||
| IEC 61300-2-12:2005 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact | ||||
| IEC 60874-1-1:1994/COR1:1996 | Corrigendum 1 - Connectors for optical fibres and cables | ||||
| IEC 60874-1-1:2006 | Connectors for optical fibres and cables - Part 1-1: Blank detail specification | ||||
| IEC 60794-3:1994 | Optical fibre cables - Part 3: Telecommunication cables - Sectional specification | ||||
| IEC 60794-2-40:2003 | Optical fibre cables - Part 2-40: Indoor cables - Family specification for simplex and duplex cables with buffered A4 fibres | ||||
| IEC 60794-2-40:2003/COR1:2005 | Corrigendum 1 - Optical fibre cables - Part 2-40: Indoor cables - Family specification for simplex and duplex cables with buffered A4 fibres | ||||
| IEC 60601-2-57:2011 | Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use | ||||
| IEC 60197:1965 | High-voltage connecting wire with flame retarding insulation for use in television receivers | ||||
| IEC 62467-1:2009 | Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers | ||||
| IEC TS 61223-2-1:1993 | Evaluation and routing testing in medical imaging departments - Part 2-1: Constancy tests - Film processors | ||||
| ISO TR 80001-2-7:2015 | Application of risk management for IT-networks incorporating medical devices -- Application guidance -- Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1 | ||||
| ISO 14971:2007 | Medical devices - Application of risk management to medical devices | ||||
| IEC 60601-2-64:2014 | Medical electrical equipment - Part 2-64: Particular requirements for the basic safety and essential performance of light ion beam medical electrical equipment | ||||
| ISO 18080-4:2015 | Textiles -- Test methods for evaluating the electrostatic propensity of fabrics -- Part 4: Test method using horizontal mechanical friction | ||||
| IEC 62366-1:2015 | Medical devices - Part 1: Application of usability engineering to medical devices | ||||
| IEC TR 62540:2009 | Radio frequency identification (RFID) for stationary lead acid cells and monoblocs - Tentative requirements | ||||
| IEC 60672-1:1995 | Ceramic and glass insulating materials - Part 1: Definitions and classification | ||||
| IEC 62023:2011/COR1:2012 | Corrigendum 1 - Structuring of technical information and documentation | ||||
| IEC 61580-3:1997 | Methods of measurement for Waveguides - Part 3: Variation of group delay | ||||
| IEC 62327:2006 | Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation | ||||
| IEC 60748-20-1:1994 | Semiconductor devices - Integrated circuits - Part 20: Generic specification for film integrated circuits and hybrid film integrated circuits - Section 1: Requirements for internal visual examination | ||||
| IEC 60311:2016 | Electric irons for household or similar use - Methods for measuring performance | ||||
| IEC 61069-8:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties | ||||
| IEC 61069-1:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts | ||||
| IEC 61069-2:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology | ||||
| IEC 62899-502-1:2017 | Printed electronics - Part 502-1: Quality assessment - Organic light emitting diode (OLED) elements - Mechanical stress testing of OLED elements formed on flexible substrates | ||||
| IEC 61069-3:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality | ||||
| IEC 60654-1:1993 | Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions | ||||
| IEC 62317-6:2015 | Ferrite cores - Dimensions - Part 6: ETD-cores for use in power supplies | ||||
| IEC 60749-5:2017 | Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test | ||||
| IEC 60749-9:2017 | Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking |
若您对上表中数据有任何疑问，请与网站联系。
