（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 60754-2:1991/AMD1:1997 | Amendment 1 - Test on gases evolved during combustion of electric cables - Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity | ||||
| IEC TR 62471-2:2009 | Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety | ||||
| IEC 60335-2-51:2002/AMD2:2011 | Amendment 2 - Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations | ||||
| IEC 60076-15:2015 | Power transformers - Part 15: Gas-filled power transformers | ||||
| IEC TS 60076-19:2013 | Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors | ||||
| IEC 60745-2-8:2003 | Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers | ||||
| IEC 60745-2-14:2003/AMD2:2010 | Amendment 2 - Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers | ||||
| IEC 60335-2-51:2002/AMD1:2008 | Amendment 1 - Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations | ||||
| IEC 60745-2-12:2003+AMD1:2008 CSV | Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators | ||||
| IEC 61096:1992/AMD1:1996 | Amendment 1 - Methods of measuring the characteristics of reproducing equipment for digital audio compact discs | ||||
| IEC 62153-4-2:2003 | Metallic communication cable test methods - Part 4-2: Electromagnetic compatibility (EMC) - Screening and coupling attenuation - Injection clamp method | ||||
| IEC TS 60110-2:2000 | Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses | ||||
| IEC TR 61901:2016 | Tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (U<sub>m</sub> = 36 kV) up to and including 500 kV (U<sub>m</sub> = 550 kV) | ||||
| IEC 60424-4:2015 | Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores | ||||
| IEC 60819-1:2009 | Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements | ||||
| IEC TR 62839-1:2014 | Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules | ||||
| IEC 60096-0-1:2012+AMD1:2017 CSV | Radio frequency cables - Part 1- 0: Guide to the design of detail specifications - Coaxial cables | ||||
| IEC 61921:2003 | Power capacitors - Low-voltage power factor correction banks | ||||
| IEC 61196-1-100:2015 | Coaxial communication cables - Part 1-100: Electrical test methods - General requirements | ||||
| IEC TR 62939-1:2014 | Smart grid user interface - Part 1: Interface overview and country perspectives | ||||
| IEC 61196-1-209:2016 | Coaxial communication cables - Part 1-209: Environmental test methods - Thermal cycling | ||||
| IEC 61196-3:1998 | Radio frequency cables - Part 3: Sectional specification for coaxial cables for use in local area networks | ||||
| IEC 61196-3-2:1997 | Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horinzontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks for 185 m reach and up to 10 Mb/s. | ||||
| IEC 61196-4:2015 | Coaxial communication cables - Part 4: Sectional specification for radiating cables | ||||
| IEC 61196-3-3:1997 | Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s | ||||
| IEC 61788-2:2006 | Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors | ||||
| IEC 61978-1:2000 | Fibre optic passive dispersion compensators - Part 1: Generic specification | ||||
| IEC 62056-46:2002/AMD1:2006 | Amendment 1 - Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol | ||||
| IEC TS 62257-9-2:2006 | Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-2: Microgrids | ||||
| IEC 60793-2-50:2008 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres | ||||
| IEC 60684-2:1984 | Specification for flexible insulating sleeving. Part 2: Methods of test. | ||||
| CISPR 20:2006+AMD1:2013 CSV | Sound and television broadcast receivers and associated equipment -Immunity characteristics - Limits and methods of measurement | ||||
| IEC TS 60816:1984 | Guide on methods of measurement of short duration transients on low-voltage power and signal lines | ||||
| IEC 62040-3:2011/COR1:2011 | Corrigendum 1 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements | ||||
| IEC 60745-2-6:1989/COR1:1989 | Safety of hand-held motor-operated electric tools. Part 2: Particular requirements for hammers | ||||
| IEC 60749-43:2017 PRV | Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans | ||||
| IEC 60684-3-216:2001 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving | ||||
| IEC 60688:1992+AMD1:1997 CSV | Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals | ||||
| IEC 60309-1:1999/AMD1:2005/COR1:2014 | Corrigendum 1 - Amendment 1 - Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements | ||||
| IEC 61557-5:1997 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth | ||||
| IEC 62115:2003/AMD2:2010 | Amendment 2 - Electric toys - Safety | ||||
| ISO/IEC TR 12182:1998 | Information technology -- Categorization of software | ||||
| IEC 60335-2-40:2002/AMD1:2005/COR1:2006 | Corrigendum 1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers | ||||
| IEC 61184:2008/COR2:2012 | Corrigendum 2 - Bayonet lampholders | ||||
| IEC TR 61997:2001 | Guidelines for the user interface in multimedia equipment for general purpose use | ||||
| IEC 60581-10:1986 | High fidelity audio equipment and systems: Minimum performance requirements. Part 10: Headphones | ||||
| IEC 61196-11:2016 | Coaxial communication cables - Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectric | ||||
| IEC 61340-4-4:2012/AMD1:2014 | Amendment 1 - Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) | ||||
| IEC 60556:2006+AMD1:2016 CSV | Gyromagnetic materials intended for application at microwavefrequencies - Measuring methods for properties | ||||
| IEC TR 60344:2007 | Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide |
若您对上表中数据有任何疑问，请与网站联系。
