（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 5917:1980 | Chlorofluorinated hydrocarbons -- Determination of boiling range -- Test for product characterization | ||||
| ISO 1592:1977 | Urea for industrial use -- Determination of nitrogen content -- Titrimetric method after distillation | ||||
| ISO 2753:1973 | Urea for industrial use -- Determination of water content -- Karl Fischer method | ||||
| ISO 1390-2:1977 | Maleic anhydride for industrial use -- Methods of test -- Part 2: Measurement of colour of the molten material | ||||
| ISO/R 1852:1970 | Withdrawal of ISO/R 1852-1970 | ||||
| ISO 12117:1997/Cor 1:2000 | |||||
| ISO 2879:1975 | Glycerine for industrial use -- Determination of glycerol content -- Titrimetric method | ||||
| ISO 8007:1985 | Carbonaceous materials used in the production of aluminium -- Sampling from cathodic blocks and prebaked anodes -- General | ||||
| ISO 14428:2005 | Carbonaceous materials for the production of aluminium -- Cold and tepid ramming pastes -- Expansion/shrinkage during baking | ||||
| ISO 4586-2:1997/Amd 8:2002 | Dimensional stability | ||||
| ISO 18842:2015 | Aluminium oxide primarily used for the production of aluminium -- Method for the determination of tapped and untapped density | ||||
| ISO 212:2007/Amd 1:2012 | |||||
| ISO 709:2001 | Essential oils -- Determination of ester value | ||||
| ISO 875:1999 | Essential oils -- Evaluation of miscibility in ethanol | ||||
| ISO 3053:1975 | Oil of grapefruit (obtained by expression) | ||||
| ISO 3063:2004 | Oil of ylang-ylang (Cananga odorata (Lam.) Hook. f. et Thomson forma genuina) | ||||
| ISO 3518:1979 | Oil of sandalwood (Santalum album, Linnaeus) | ||||
| ISO 8901:2003 | Oil of bitter orange petitgrain, cultivated (Citrus aurantium L.) | ||||
| ISO 10115:1997 | Oil of tarragon (Artemisia dracunculus L.), French type | ||||
| ISO 4613-2:1995/Amd 1:2004 | |||||
| ISO 11236:2000/Cor 1:2006 | |||||
| ISO 4298:1978 | Manganese ores and concentrates -- Determination of manganese content -- Potentiometric method | ||||
| ISO 4695:2015 | Iron ores for blast furnace feedstocks -- Determination of the reducibility by the rate of reduction index | ||||
| ISO 4695:2007 | Iron ores for blast furnace feedstocks -- Determination of the reducibility by the rate of reduction index | ||||
| ISO 11534:1998 | Iron ores -- Determination of tin content -- Flame atomic absorption spectrometric method | ||||
| ISO/CD 945-4 | Microstructure of cast irons -- Part 4: Test method for determining nodularity in spheroidal graphite cast irons | ||||
| ISO/R 683-7:1970 | Heat-treated steels, alloy steels and free-cutting steels -- Part 7: Wrought quenched and tempered chromium steels | ||||
| ISO 9444:1990 | Hot-rolled stainless steel wide strip and sheet -- Tolerances on dimensions and form | ||||
| ISO 3573:2012 | Hot-rolled carbon steel sheet of commercial and drawing qualities | ||||
| ISO 3575:1996 | Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities | ||||
| ISO 4950-3:1981 | High yield strength flat steel products -- Part 3: Products supplied in the heat- treated (quenched + tempered) condition | ||||
| ISO 6317:2008 | Hot-rolled carbon steel strip of commercial and drawing qualities | ||||
| ISO 4990:1986 | Steel castings -- General technical delivery requirements | ||||
| ISO 795:1976 | Aluminium and aluminium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method | ||||
| ISO 3978:1976 | Aluminium and aluminium alloys -- Determination of chromium -- Spectrophotometric method using diphenylcarbazide, after extraction | ||||
| ISO 14782:1999 | Plastics -- Determination of haze for transparent materials | ||||
| ISO/DIS 15033 | Plastics -- Determination of caprolactam and its cyclic and linear oligomers by HPLC | ||||
| ISO 21048:2004 | Plastics -- Epoxy resins -- Determination of 1,2-glycol content | ||||
| ISO 1873-1:1986 | Plastics -- Polypropylene (PP) and propylene-copolymer thermoplastics -- Part 1: Designation | ||||
| ISO 2557-1:1989 | Plastics -- Amorphous thermoplastics -- Preparation of test specimens with a specified maximum reversion -- Part 1: Bars | ||||
| ISO 15103-1:2000 | Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | ||||
| ISO/DIS 20029-2 | Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimen and determination of properties | ||||
| ISO 787-10:1981 | General methods of test for pigments and extenders -- Part 10: Determination of density -- Pyknometer method | ||||
| ISO 28941-1:2008 | Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | ||||
| ISO 3302:1976/Amd 1:1983 | |||||
| ISO 3302-1:1996/Amd 1:2001 | Classification system for flash | ||||
| ISO 3302-1:2014 | Rubber -- Tolerances for products -- Part 1: Dimensional tolerances | ||||
| ISO 3302-2:1998 | Rubber -- Tolerances for products -- Part 2: Geometrical tolerances | ||||
| ISO 13000-1:1997 | Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 1: Requirements and designation | ||||
| ISO 13000-1:2005 | Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 1: Requirements and designation |
若您对上表中数据有任何疑问，请与网站联系。
