（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 6441-2:1999 | Paints and varnishes -- Determination of micro-indentation hardness -- Part 2: Knoop hardness by measurement of indentation depth under load | ||||
| ISO 6504-3:2006 | Paints and varnishes -- Determination of hiding power -- Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate | ||||
| ISO 6441-1:1999 | Paints and varnishes -- Determination of micro-indentation hardness -- Part 1: Knoop hardness by measurement of indentation length | ||||
| ISO 10058-1:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) -- Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica | ||||
| ISO 6272-2:2011 | Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 2: Falling-weight test, small-area indenter | ||||
| ISO 6860:2006 | Paints and varnishes -- Bend test (conical mandrel) | ||||
| ISO 6860:1984 | Paints and varnishes -- Bend test (conical mandrel) | ||||
| ISO 7254:1984 | Paints and varnishes -- Assessment of natural spreading rate -- Brush application | ||||
| ISO 9504:1993 | Metallurgical-grade fluorspar -- Determination of antimony content -- Solvent extraction atomic absorption spectrometric method | ||||
| ISO 9779:1990 | Metallurgical-grade fluorspar -- Determination of lead content -- Solvent extraction atomic absorption spectrometric method | ||||
| ISO 9779:1993 | Metallurgical-grade fluorspar -- Determination of lead content -- Solvent extraction atomic absorption spectrometric method | ||||
| ISO 10337:1997 | Crude petroleum -- Determination of water -- Coulometric Karl Fischer titration method | ||||
| ISO 9029:1990 | Crude petroleum -- Determination of water -- Distillation method | ||||
| ISO 6326-1:1989 | Natural gas -- Determination of sulfur compounds -- Part 1: General introduction | ||||
| ISO 6326-1:2007 | Natural gas -- Determination of sulfur compounds -- Part 1: General introduction | ||||
| ISO 6326-4:1994 | Natural gas -- Determination of sulfur compounds -- Part 4: Gas chromatographic method using a flame photometric detector for the determination of hydrogen sulfide, carbonyl sulfide and sulfur-containing odorants | ||||
| ISO 6326-5:1989 | Natural gas -- Determination of sulfur compounds -- Part 5: Lingener combustion method | ||||
| ISO 6570:2001 | Natural gas -- Determination of potential hydrocarbon liquid content -- Gravimetric methods | ||||
| ISO 6974-2:2012 | Natural gas -- Determination of composition and associated uncertainty by gas chromatography -- Part 2: Uncertainty calculations | ||||
| ISO 9148:1987 | Composition cork in rolls for decoration -- Test methods | ||||
| ISO 6974-4:2000 | Natural gas -- Determination of composition with defined uncertainty by gas chromatography -- Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns | ||||
| ISO 6974-5:2014 | Natural gas -- Determination of composition and associated uncertainty by gas chromatography -- Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons | ||||
| ISO 6974-6:2002/Cor 1:2003 | |||||
| ISO 6974-6:2002 | Natural gas -- Determination of composition with defined uncertainty by gas chromatography -- Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns | ||||
| ISO/IEC 13240:2001/Cor 1:2003 | |||||
| ISO 11541:1997 | Natural gas -- Determination of water content at high pressure | ||||
| ISO 22854:2008 | Liquid petroleum products -- Determination of hydrocarbon types and oxygenates in automotive-motor gasoline -- Multidimensional gas chromatography method | ||||
| ISO/DIS 18485 | Peel test for the determination of interlaminar fracture toughness of flexible packaging laminates | ||||
| ISO 4926:1978 | Road vehicles -- Hydraulic brake systems -- Non-petroleum base reference fluids | ||||
| ISO/TS 11365:2011 | Petroleum and related products -- Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids | ||||
| ISO 3869:2001 | Composition cork -- Expansion joint fillers -- Specifications, packaging and marking | ||||
| ISO 4635:2011 | Rubber, vulcanized -- Preformed joint seals for use between concrete paving sections of highways -- Specification | ||||
| ISO 8340:1984/Cor 1:1995 | |||||
| ISO 8340:1984 | Building construction -- Jointing products -- Sealants -- Determination of tensile properties at maintained extension | ||||
| ISO 8339:2005 | Building construction -- Sealants -- Determination of tensile properties (Extension to break) | ||||
| ISO/TR 20436 | Buildings and civil engineering works -- Sealants -- Paintability and paint compatibility of sealants | ||||
| ISO 9693-1:2012 | Dentistry -- Compatibility testing -- Part 1: Metal-ceramic systems | ||||
| ISO/DIS 10139-1 | Dentistry -- Soft lining materials for removable dentures -- Part 1: Materials for short-term use | ||||
| ISO 15912:2006 | Dentistry -- Casting investments and refractory die materials | ||||
| ISO 17304:2013 | Dentistry -- Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials | ||||
| ISO 15912:2016 | Dentistry -- Refractory investment and die material | ||||
| ISO 20749:2017 | Dentistry -- Pre-capsulated dental amalgam | ||||
| ISO 4491-3:1989 | Metallic powders -- Determination of oxygen content by reduction methods -- Part 3: Hydrogen-reducible oxygen | ||||
| ISO 4499-2:2008 | Hardmetals -- Metallographic determination of microstructure -- Part 2: Measurement of WC grain size | ||||
| ISO 18549-2:2009 | Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 2: Determination of flow rate at elevated temperatures | ||||
| ISO 3735:1975 | Crude petroleum and fuel oils -- Determination of sediment -- Extraction method | ||||
| ISO 6974-3:2000 | Natural gas -- Determination of composition with defined uncertainty by gas chromatography -- Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns | ||||
| ISO/R 633:1967 | Cork -- Glossary | ||||
| ISO 2219:2010 | Thermal insulation products for buildings -- Factory-made products of expanded cork (ICB) -- Specification | ||||
| ISO 7322:2000 | Composition cork -- Test methods |
若您对上表中数据有任何疑问，请与网站联系。
