（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/TS 16774-3:2016 | Test methods for repair materials for water-leakage cracks in underground concrete structures -- Part 3: Test method for water (wash out) resistance | ||||
| ISO 22389-1:2010 | Timber structures -- Bending strength of I-beams -- Part 1: Testing, evaluation and characterization | ||||
| ISO 22390:2010 | Timber structures -- Laminated veneer lumber -- Structural properties | ||||
| ISO 7728:1985 | Typical horizontal joints between an external wall of prefabricated ordinary concrete components and a concrete floor -- Properties. characteristics and classification criteria | ||||
| ISO 7729:1985 | Typical vertical joints between two prefabricated ordinary concrete external wall components -- Properties, characteristics and classification criteria | ||||
| ISO 7844:1985 | Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels -- Laboratory mechanical tests -- Effect of tangential loading | ||||
| ISO 7845:1985 | Horizontal joints between load-bearing walls and concrete floors -- Laboratory mechanical tests -- Effect of vertical loading and of moments transmitted by the floors | ||||
| ISO 16204:2012 | Durability -- Service life design of concrete structures | ||||
| ISO 15673:2016 | Guidelines for the simplified design of structural reinforced concrete for buildings | ||||
| ISO 15673:2005 | Guidelines for the simplified design of structural reinforced concrete for buildings | ||||
| ISO/TR 16475:2011 | Guidelines for the repair of water-leakage cracks in concrete structures | ||||
| ISO/TS 16774-1:2017 | Test methods for repair materials for water-leakage cracks in underground concrete structures -- Part 1: Test method for thermal stability | ||||
| ISO/TS 16774-2:2016 | Test methods for repair materials for water-leakage cracks in underground concrete structures -- Part 2: Test method for chemical resistance | ||||
| ISO/TS 16774-5:2017 | Test methods for repair materials for water-leakage cracks in underground concrete structures -- Part 5: Test method for watertightness | ||||
| ISO 18319:2015 | Fibre-reinforced polymer (FRP) reinforcement for concrete structures -- Specifications of FRP sheets | ||||
| ISO/TS 16774-6:2017 | Test methods for repair materials for water-leakage cracks in underground concrete structures -- Part 6: Test method for response to the substrate movement | ||||
| ISO 19338:2003 | Performance and assessment requirements for design standards on structural concrete | ||||
| ISO 19338:2007 | Performance and assessment requirements for design standards on structural concrete | ||||
| ISO 19338:2007/Cor 2:2009 | |||||
| ISO 679:2009 | Cement -- Test methods -- Determination of strength | ||||
| ISO 28842:2013 | Guidelines for simplified design of reinforced concrete bridges | ||||
| ISO 28841:2013 | Guidelines for simplified seismic assessment and rehabilitation of concrete buildings | ||||
| ISO 19338:2014 | Performance and assessment requirements for design standards on structural concrete | ||||
| ISO 22966:2009 | Execution of concrete structures | ||||
| ISO 24353:2008 | Hygrothermal performance of building materials and products -- Determination of moisture adsorption/desorption properties in response to humidity variation | ||||
| ISO 680:1990 | Cement -- Test methods -- Chemical analysis | ||||
| ISO 1587:1975 | Gypsum rock for the manufacture of binders -- Specifications | ||||
| ISO/R 1588:1971 | Withdrawal of ISO/R 1588-1971 | ||||
| ISO 3048:1974 | Gypsum plasters -- General test conditions | ||||
| ISO 9597:1989 | Cements -- Test methods -- Determination of setting time and soundness | ||||
| ISO 6308:1980 | Gypsum plasterboard -- Specification | ||||
| ISO 9597:2008 | Cement -- Test methods -- Determination of setting time and soundness | ||||
| ISO 29581-1:2009 | Cement -- Test methods -- Part 1: Analysis by wet chemistry | ||||
| ISO 3052:1974 | Gypsum plasters -- Determination of water of crystallization content | ||||
| ISO 29582-1:2009 | Methods of testing cement -- Determination of the heat of hydration -- Part 1: Solution method | ||||
| ISO 29582-2:2009 | Methods of testing cement -- Determination of the heat of hydration -- Part 2: Semi-adiabatic method | ||||
| ISO 1920:1976 | Concrete tests -- Dimensions, tolerances and applicability of test specimens | ||||
| ISO 1920-2:2005 | Testing of concrete -- Part 2: Properties of fresh concrete | ||||
| ISO 1920-1:2004 | Testing of concrete -- Part 1: Sampling of fresh concrete | ||||
| ISO/NP 1920-3 | Testing of concrete -- Part 3: Making and curing test specimens | ||||
| ISO 1920-3:2004 | Testing of concrete -- Part 3: Making and curing test specimens | ||||
| ISO 1920-6:2004 | Testing of concrete -- Part 6: Sampling, preparing and testing of concrete cores | ||||
| ISO 1920-7:2004 | Testing of concrete -- Part 7: Non-destructive tests on hardened concrete | ||||
| ISO 1920-8:2009 | Testing of concrete -- Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory | ||||
| ISO 1920-12:2015 | Testing of concrete -- Part 12: Determination of the carbonation resistance of concrete -- Accelerated carbonation method | ||||
| ISO 2736-1:1986 | Concrete tests -- Test specimens -- Part 1: Sampling of fresh concrete | ||||
| ISO 2736-2:1986 | Concrete tests -- Test specimens -- Part 2: Making and curing of test specimens for strength tests | ||||
| ISO 3893:1977 | Concrete -- Classification by compressive strength | ||||
| ISO/R 632:1967 | Withdrawal of ISO/R 632-1967 | ||||
| ISO/NP 916 | Testing of refrigerating systems |
若您对上表中数据有任何疑问，请与网站联系。
