（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 6930:1983 | High yield strength flat steel products for cold forming | ||||
| ISO 6932:2001 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % | ||||
| ISO 2355:1972 | Chemical analysis of magnesium and its alloys -- Determination of rare earths -- Gravimetric method | ||||
| ISO 2354:1976 | Magnesium alloys -- Determination of insoluble zirconium -- Alizarin sulphonate photometric method | ||||
| ISO/R 1811:1971 | Chemical analysis of copper and copper alloys -- Sampling of copper refinery shapes | ||||
| ISO 4741:1984 | Copper and copper alloys -- Determination of phosphorus content -- Molybdovanadate spectrometric method | ||||
| ISO 752:2004 | Zinc ingots | ||||
| ISO 6363-4:2012 | Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars, tubes and wires -- Part 4: Drawn rectangular bars and wires -- Tolerances on form and dimensions | ||||
| ISO 14855-1:2005/Cor 1:2009 | |||||
| ISO/R 408:1964 | Safety colours | ||||
| ISO/DIS 80000-1 | Quantities and units -- Part 1: General | ||||
| ISO 9807:1991 | Banking and related financial services -- Requirements for message authentication (retail) | ||||
| ISO 11568-4:2007 | Banking -- Key management (retail) -- Part 4: Asymmetric cryptosystems -- Key management and life cycle | ||||
| ISO/IEC 14496-28:2012/Cor 1:2013 | |||||
| ISO/IEC 23007-1:2010/Amd 1:2012 | Widget extensions | ||||
| ISO 127:2012 | Rubber, natural latex concentrate -- Determination of KOH number | ||||
| ISO 976:1996/Amd 1:2006 | Precision data | ||||
| ISO 1802:1985 | Natural rubber latex concentrate -- Determination of boric acid content | ||||
| ISO 4074-5:1984 | Rubber condoms -- Part 5: Testing for holes | ||||
| ISO 13491-1:2016 | Financial services -- Secure cryptographic devices (retail) -- Part 1: Concepts, requirements and evaluation methods | ||||
| ISO 10966:2005 | Sports and recreational equipment -- Fabrics for awnings and camping tents -- Specification | ||||
| ISO 7930:1986 | Wheelchairs -- Type classification based on appearance characteristics | ||||
| ISO 4074-1:1996 | Rubber condoms -- Part 1: Requirements | ||||
| ISO 4074-2:1980 | Rubber condoms -- Part 2: Determination of length | ||||
| ISO 4074-5:1980 | Rubber condoms -- Part 5: Testing for holes | ||||
| ISO 4074-5:1996 | Rubber condoms -- Part 5: Testing for holes -- Water leak test | ||||
| ISO 4074-6:1984 | Rubber condoms -- Part 6: Determination of bursting volume and pressure | ||||
| ISO 4074-6:1996 | Rubber condoms -- Part 6: Determination of bursting volume and pressure | ||||
| ISO 4074-7:1996 | Rubber condoms -- Part 7: Oven conditioning | ||||
| ISO 4074-10:1990 | Rubber condoms -- Part 10: Packaging and labelling -- Condoms in consumer packages | ||||
| ISO 7439:2015 | Copper-bearing contraceptive intrauterine devices -- Requirements and tests | ||||
| ISO 7857-1:1983 | Intra-uterine devices -- Part 1: Determination of breaking force | ||||
| ISO 8009:2004 | Mechanical contraceptives -- Reusable natural and silicone rubber contraceptive diaphragms -- Requirements and tests | ||||
| ISO 8009:2004/Amd 1:2012 | |||||
| ISO 8009-2:1985 | Reusable rubber contraceptive diaphragms -- Part 2: Determination of size | ||||
| ISO 8009-3:1985 | Reusable rubber contraceptive diaphragms -- Part 3: Determination of dome thickness | ||||
| ISO 8009-4:1996 | Reusable rubber contraceptive diaphragms -- Part 4: Freedom from visible defects | ||||
| ISO 8009-5:1996 | Reusable rubber contraceptive diaphragms -- Part 5: Determination of tensile properties | ||||
| ISO 8009-6:1985 | Reusable rubber contraceptive diaphragms -- Part 6: Determination of deterioration after accelerated ageing | ||||
| ISO 8009-8:1985 | Reusable rubber contraceptive diaphragms -- Part 8: Determination of twisting during compression of coil spring and flat spring diaphragms | ||||
| ISO 8009-9:1985 | Reusable rubber contraceptive diaphragms -- Part 9: Packaging and labelling | ||||
| ISO/DIS 11249 | Mechanical contraceptives -- Guidance for clinical evaluation of intra-uterine contraceptive devices (IUDs) | ||||
| ISO 16037:2002 | Rubber condoms for clinical trials -- Measurement of physical properties | ||||
| ISO/TR 8550-1:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Part 1: Acceptance sampling | ||||
| ISO/DIS 2100-212 | Aerospace elements of electrical and optical connection -- Test methods -- Part 212: Surface transfer impedance | ||||
| ISO/TR 8550-2:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Part 2: Sampling by attributes | ||||
| ISO 11843-2:2000/Cor 1:2007 | |||||
| ISO/TR 12845:2010 | Selected illustrations of fractional factorial screening experiments | ||||
| ISO 13053-2:2011 | Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques | ||||
| ISO/TR 13587:2012 | Three statistical approaches for the assessment and interpretation of measurement uncertainty |
若您对上表中数据有任何疑问，请与网站联系。
