(清空日期可显示全部记录)

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
ISO/IEC CD Guide 41 Packaging -- Recommendations for addressing consumer needs
ISO/TR 19300:2015 Graphic technology -- Guidelines for the use of standards for print media production
ISO/TS 4869-5:2006 Acoustics -- Hearing protectors -- Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects
ISO 2372:1974 Mechanical vibration of machines with operating speeds from 10 to 200 rev/s -- Basis for specifying evaluation standards
ISO 2372:1974/Amd 1:1983
ISO 4867:1984 Code for the measurement and reporting of shipboard vibration data
ISO 5344:1980 Electrodynamic test equipment for generating vibration -- Methods of describing equipment characteristics
ISO 6070:1981 Auxiliary tables for vibration generators -- Methods of describing equipment characteristics
ISO 6954:1984 Mechanical vibration and shock -- Guidelines for the overall evaluation of vibration in merchant ships
ISO 8608:2016 Mechanical vibration -- Road surface profiles -- Reporting of measured data
ISO 10112:1991 Damping materials -- Graphical presentation of the complex modulus
ISO 17743:2016 Energy savings -- Definition of a methodological framework applicable to calculation and reporting on energy savings
ISO 9869:1994 Thermal insulation -- Building elements -- In-situ measurement of thermal resistance and thermal transmittance
ISO 9972:2006/Amd 1:2009
ISO 9972:1996 Thermal insulation -- Determination of building airtightness -- Fan pressurization method
ISO 10077-1 Thermal performance of windows, doors and shutters -- Calculation of thermal transmittance -- Part 1: General
ISO/CD 14743 Pneumatic fluid power -- Push-in connectors for thermoplastic tubes
ISO/NP 14743 Pneumatic fluid power -- Push-in connectors for thermoplastic tubes
ISO 10077-2:2012 Thermal performance of windows, doors and shutters -- Calculation of thermal transmittance -- Part 2: Numerical method for frames
ISO 10077-2:2012/Cor 1:2012
ISO 16343:2013 Energy performance of buildings -- Methods for expressing energy performance and for energy certification of buildings
ISO 17772-1 Energy performance of buildings -- Indoor environmental quality -- Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings
ISO/DTR 17772-2 Energy performance of buildings -- Overall Energy performance Assessment Procedures -- Part 2: Guideline for using indoor environmental input parameters for the design and assessment of energy performance of buildings
ISO 18393-1:2012 Thermal insulation products -- Determination of ageing by settlement -- Part 1: Blown loose-fill insulation for ventilated attics
ISO 18523-1:2016 Energy performance of buildings -- Schedule and condition of building, zone and space usage for energy calculation -- Part 1: Non-residential buildings
ISO/TR 52016-2 Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads -- Part 2: Explanation and justification of ISO 52016-1 and ISO 52017-1
ISO/TR 52019-2 Energy performance of buildings -- Hygrothermal performance of building components and building elements -- Part 2: Explanation and justification
ISO/IEC 29341-15-10:2011 Information technology -- UPnP Device Architecture -- Part 15-10: Content Synchronization Device Control Protocol -- Content Synchronization Service
ISO/IEC DIS 29341-25-1 Information technology -- UPnP Device Architecture -- Part 25-1: Telephony device control protocol -- Telephony architecture
ISO 1730:1980 Dictation equipment -- Basic operating requirements
ISO 2126:1975 Office machines -- Basic arrangement for the alphanumeric section of keyboards operated with both hands
ISO 2257:1980 Office machines and printing machines used for information processing -- Widths of fabric printing ribbons on spools
ISO 2258:1976 Printing ribbons -- Minimum markings to appear on containers
ISO 2775:1977 Office machines and printing machines used for information processing -- Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons
ISO 3866:1977 Office machines and printing machines used for information processing -- Widths of fabric printing ribbons on spools exceeding 19 mm
ISO 12643-1:2009 Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 1: General requirements
ISO 12643-3:2010 Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 3: Binding and finishing equipment and systems
ISO/CD 12643-3 Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 3: Binding and finishing equipment and systems
ISO 15341:2014 Graphic technology -- Method for radius determination of printing cylinders
ISO 12648:2006 Graphic technology -- Safety requirements for printing press systems
ISO/IEC 19798:2006 Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components
ISO/DIS 20690 Graphic technology -- Determination of the operating power consumption of digital printing devices
ISO 21015:2007 Office furniture -- Office work chairs -- Test methods for the determination of stability, strength and durability
ISO 22879:2016 Castors and wheels -- Requirements for castors for furniture
ISO 9177-1:2016 Mechanical pencils for technical drawings -- Part 1: Classification, dimensions, performance requirements and testing
ISO 9022-16:1994 Optics and optical instruments -- Environmental test methods -- Part 16: Combined bounce or steady-state acceleration, in dry heat or cold
ISO 14132-1:2002 Optics and optical instruments -- Vocabulary for telescopic systems -- Part 1: General terms and alphabetical indexes of terms in ISO 14132
ISO/CD 21575 Optics and photonics -- Test method for water resistance of optical glass by powder method
ISO 11979-7:2006/Amd 1:2012
ISO 9849:1991 Optics and optical instruments -- Geodetic instruments -- Vocabulary

若您对上表中数据有任何疑问,请与网站联系。