（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 12680-1:2005 | Methods of test for refractory products -- Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration | ||||
| ISO 13765-1:2004 | Refractory mortars -- Part 1: Determination of consistency using the penetrating cone method | ||||
| ISO 12678-2:1996 | Refractory products -- Measurement of dimensions and external defects of refractory bricks -- Part 2: Corner and edge defects and other surface imperfections | ||||
| ISO 13765-2:2004 | Refractory mortars -- Part 2: Determination of consistency using the reciprocating flow table method | ||||
| ISO 16349:2015 | Refractory materials -- Determination of abrasion resistance at elevated temperature | ||||
| ISO/DIS 7781 | Styrene-butadiene rubber, raw -- Determination of soap and organic-acid content | ||||
| ISO 12243:2003/Amd 1:2012 | |||||
| ISO 1147:1988 | Plastics -- Polymer dispersions -- Freeze-thaw cycle stability test | ||||
| ISO 2818:1980 | Plastics -- Preparation of test specimens by machining | ||||
| ISO 1382:2008 | Rubber -- Vocabulary | ||||
| ISO 1407:2011 | Rubber -- Determination of solvent extract | ||||
| ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing | ||||
| ISO 1658:2009 | Natural rubber (NR) -- Evaluation procedure | ||||
| ISO 3387:2012 | Rubber -- Determination of crystallization effects by hardness measurements | ||||
| ISO 6505:1997 | Rubber, vulcanized or thermoplastic -- Determination of tendency to adhere to and to corrode metals | ||||
| ISO 13226:1999 | Rubber -- Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers | ||||
| ISO 16565:2002 | Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers | ||||
| ISO 1536:1975 | Continuous mechanical handling equipment for loose bulk materials -- Troughed belt conveyors (other than portable conveyors) -- Belt pulleys | ||||
| ISO 19242:2015 | Rubber -- Determination of total sulfur content by ion chromatography | ||||
| ISO 23529:2004 | Rubber -- General procedures for preparing and conditioning test pieces for physical test methods | ||||
| ISO 23794:2010 | Rubber, vulcanized or thermoplastic -- Abrasion testing -- Guidance | ||||
| ISO 7822:1990 | Textile glass reinforced plastics -- Determination of void content -- Loss on ignition, mechanical disintegration and statistical counting methods | ||||
| ISO 13050:1999 | Curvilinear toothed synchronous belt drive systems | ||||
| ISO 1120:2002 | Conveyor belts -- Determination of strength of mechanical fastenings -- Static test method | ||||
| ISO 1120:2012 | Conveyor belts -- Determination of strength of mechanical fastenings -- Static test method | ||||
| ISO 1275:1972 | Extended pitch precision roller chains and chain wheels for transmission and conveyors | ||||
| ISO 5612:1990 | Mining -- Scraper bars for chain conveyors | ||||
| ISO/TR 8865:1990 | Mining -- Guidance on methods of verifying dimensions of sprocket assemblies for chain conveyors | ||||
| ISO 22721:2007 | Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining | ||||
| ISO 5350-1:1998 | Pulp -- Estimation of dirt and shives -- Part 1: Inspection of laboratory sheets | ||||
| ISO 438:1980 | Paper -- Determination of bulking thickness and apparent density | ||||
| ISO 2758:2001 | Paper -- Determination of bursting strength | ||||
| ISO 11004:1992 | Paper and board -- Determination of air permeance -- Low range | ||||
| ISO 11093-1:1994 | Paper and board -- Testing of cores -- Part 1: Sampling | ||||
| ISO 14968:1999 | Paper and board -- Cut-size office paper -- Measurement of curl in a pack of sheets | ||||
| ISO 8028:1999 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying -- Specification | ||||
| ISO 3009:1976/Amd 1:1984 | |||||
| ISO 11479-2:2011 | Glass in building -- Coated glass -- Part 2: Colour of façade | ||||
| ISO/PAS 16940:2004 | Glass in building -- Glazing and airborne sound insulation -- Measurement of the mechanical impedance of laminated glass | ||||
| ISO/FDIS 18178 | Glass in building -- Laminated solar photovoltaic glass for use in buildings | ||||
| ISO 3008:2007 | Fire-resistance tests -- Door and shutter assemblies | ||||
| ISO 3008-2 | Fire-resistance tests -- Part 2: Lift landing door assemblies | ||||
| ISO/TR 6167:1984 | Fire-resistance tests -- Contribution made by suspended ceilings to the protection of steel beams in floor and roof assemblies | ||||
| ISO 12468-1:2003 | External exposure of roofs to fire -- Part 1: Test method | ||||
| ISO/TR 12468-3:2014 | External exposure of roofs to fire -- Part 3: Commentary | ||||
| ISO 12468-2:2005 | External fire exposure to roofs -- Part 2: Classification of roofs | ||||
| ISO/TS 27527:2010 | Health informatics -- Provider identification | ||||
| ISO 559:1991 | Steel tubes for water and sewage | ||||
| ISO 22391-1:2009 | Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General | ||||
| ISO 2632-2:1985 | Roughness comparison specimens -- Part 2: Spark-eroded, shot-blasted and grit-blasted, and polished |
若您对上表中数据有任何疑问，请与网站联系。
