（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/NP 16535 | Thermal insulating products for building applications -- Determination of long-term water absorption by immersion | ||||
| ISO 29470:2008 | Thermal insulating products for building applications -- Determination of the apparent density | ||||
| ISO 2537:1988 | Liquid flow measurement in open channels -- Rotating element current-meters | ||||
| ISO 4362:1992 | Measurement of liquid flow in open channels -- Trapezoidal profile weirs | ||||
| ISO 4360:1979 | Liquid flow measurement in open channels by weirs and flumes -- Triangular profile weirs | ||||
| ISO/CD 8368 | Hydrometric determinations -- Flow measurements in open channels using structures -- Guidelines for selection of structure | ||||
| ISO/TR 9209:1989 | Measurement of liquid flow in open channels -- Determination of the wetline correction | ||||
| ISO/CD 25377 | Hydrometric uncertainty guidance (HUG) | ||||
| ISO 6145-6:1986 | Gas analysis -- Preparation of calibration gas mixtures -- Dynamic volumetric methods -- Part 6: Sonic orifices | ||||
| ISO 6711:1981 | Gas analysis -- Checking of calibration gas mixtures by a comparison method | ||||
| ISO 14707:2000 | Surface chemical analysis -- Glow discharge optical emission spectrometry (GD-OES) -- Introduction to use | ||||
| ISO 14912:2003/Cor 1:2006 | |||||
| ISO 14975:2000 | Surface chemical analysis -- Information formats | ||||
| ISO/CD 20579-3 | Surface chemical analysis -- Sample handling, preparation and mounting -- Part 3: Biomaterials | ||||
| ISO 14594:2003/Cor 1:2009 | |||||
| ISO 20903:2011 | Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Methods used to determine peak intensities and information required when reporting results | ||||
| ISO 965-3:1998/Cor 1:2009 | |||||
| ISO/R 1501:1970 | ISO miniature screw threads | ||||
| ISO 3508:1976 | Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262 | ||||
| ISO 1207:2011 | Slotted cheese head screws -- Product grade A | ||||
| ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws | ||||
| ISO 2009:1994 | Slotted countersunk flat head screws (common head style) -- Product grade A | ||||
| ISO 4026:2003 | Hexagon socket set screws with flat point | ||||
| ISO 7380-2:2011 | Button head screws -- Part 2: Hexagon socket button head screws with collar | ||||
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread -- Product grades A and B | ||||
| ISO 10511:1997 | Prevailing torque type hexagon thin nuts (with non-metallic insert) | ||||
| ISO/TR 16224:2012 | Technical aspects of nut design | ||||
| ISO/R 1051:1969 | Rivet shank diameters (diameter range 1 to 36 mm) | ||||
| ISO 15977:2002 | Open end blind rivets with break pull mandrel and protruding head -- AIA/St | ||||
| ISO 8752:2009 | Spring-type straight pins -- Slotted, heavy duty | ||||
| ISO 7913:1985 | Aerospace -- Fasteners -- Tolerances of form and position for bolts and screws | ||||
| ISO 9154:2016 | Aerospace -- Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa -- Procurement specification | ||||
| ISO 3168:1998 | Aerospace -- Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C -- Dimensions | ||||
| ISO 3223:1998 | Aerospace -- Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C -- Dimensions | ||||
| ISO 7332:1998 | Aerospace -- Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C -- Dimensions | ||||
| ISO 9618:2016 | Aerospace -- Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425 degrees C, 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C, 900 MPa (at ambient temperature)/650 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/730 degrees C and 1 250 MPa (at ambient temperature)/600 degrees C -- Dimensions | ||||
| ISO 9618:1996 | Aerospace -- Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425 degrees C, 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C, 900 MPa (at ambient temperature)/650 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/730 degrees C and 1 250 MPa (at ambient temperature)/600 degrees C -- Dimensions | ||||
| ISO 244:1979 | Aircraft -- Sealing wire | ||||
| ISO 3547-6:2007 | Plain bearings -- Wrapped bushes -- Part 6: Checking the inside diameter | ||||
| ISO 6279:1979 | Plain bearings -- Aluminium alloy for solid bearings | ||||
| ISO/TR 6282:1979 | Withdrawal of ISO/TR 6282-1979 | ||||
| ISO 7148-2:1999 | Plain bearings -- Testing of the tribological behaviour of bearing materials -- Part 2: Testing of polymer-based bearing materials | ||||
| ISO 12131-1:2001 | Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 1: Calculation of thrust pad bearings | ||||
| ISO 12131-2:2001 | Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 2: Functions for the calculation of thrust pad bearings | ||||
| ISO 12303:1995 | Plain bearings -- Quality characteristics -- Calculation of machine and process capabilities | ||||
| ISO 12308:1994 | Plain bearings -- Quality assurance -- Sample types -- Definitions, applications and testing | ||||
| ISO/R 355-4:1968 | Withdrawal of ISO/R 355/4-1968 | ||||
| ISO/CD 492 | Rolling bearings -- Radial bearings -- Geometrical product specifications (GPS) and tolerance values | ||||
| ISO/R 577-2:1968 | Withdrawal of ISO/R 477/2-1968 | ||||
| ISO 1224:1984 | Rolling bearings -- Instrument precision bearings |
若您对上表中数据有任何疑问，请与网站联系。
