（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 2084:1974 | Pipeline flanges for general use -- Metric series -- Mating dimensions | ||||
| ISO 10791-6:1998/Cor 1:2004 | |||||
| ISO 702-1:1975 | Machine tools -- Spindle noses and face plates -- Sizes for interchangeability -- Part 1: Type A | ||||
| ISO 10303-517:2000/Cor 1:2002 | |||||
| ISO 2976:2005 | Coated abrasives -- Abrasive belts -- Selection of width/length combinations | ||||
| ISO 3919:1993 | Coated abrasives -- Flap wheels with shafts -- Dimensions and designation | ||||
| ISO 3919:2005 | Coated abrasives -- Flap wheels with shaft | ||||
| ISO 8486-2:2007 | Bonded abrasives -- Determination and designation of grain size distribution -- Part 2: Microgrits F230 to F2000 | ||||
| ISO 21537-1:2004 | Clamping flanges for superabrasive cutting-off wheels -- Part 1: Natural stone | ||||
| ISO 8021:1986 | Round punches with cylindrical head and straight shank | ||||
| ISO 9182-2:1992 | Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars | ||||
| ISO 9448-2:2013 | Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1 | ||||
| ISO 9448-1:2013 | Tools for pressing -- Guide bushes -- Part 1: Forms | ||||
| ISO 9448-2:1991 | Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1 | ||||
| ISO 9448-7:2013 | Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1 | ||||
| ISO 9448-7:1991 | Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1 | ||||
| ISO 9448-9:1992 | Tools for pressing -- Guide bushes -- Part 9: Form B, ball cage bushes, plain, type 2 | ||||
| ISO 10069-1:2008 | Tools for pressing -- Elastomer pressure springs -- Part 1: General specification | ||||
| ISO 10071-2:2005 | Tools for pressing -- Ball-lock punches -- Part 2: Ball-lock punches for heavy duty | ||||
| ISO 7310:1984 | Road vehicles -- Compression ignition engines -- Heads for spin-on fuel filters with horizontal flange -- Mounting and connecting dimensions | ||||
| ISO 10071:1991 | Tools for pressing -- Ball-lock punches | ||||
| ISO 10242-2:2008 | Tools for pressing -- Punch holder shanks -- Part 2: Type C | ||||
| ISO 10242-1:2011 | Tools for pressing -- Punch holder shanks -- Part 1: Type A | ||||
| ISO 11900-3:2004 | Tools for pressing -- Ball-lock punch retainers -- Part 3: Type E, reduced for heavy duty | ||||
| ISO 11903:2008 | Tools for pressing -- Guide pillar mountings | ||||
| ISO 11901-4:2014 | Tools for pressing -- Gas springs -- Part 4: Gas springs with increased spring force and same built height | ||||
| ISO 11903:1996 | Tools for pressing -- Guide pillar mountings | ||||
| ISO 16367:2008 | Tools for pressing -- Guide plates -- U- and V-blocks | ||||
| ISO 8694:2011 | Tools for moulding -- Shouldered ejector pins | ||||
| ISO 9449:2007 | Tools for moulding -- Centring sleeves | ||||
| ISO 10907-1:2008 | Tools for moulding -- Locating rings -- Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B) | ||||
| ISO 10907-2:2007 | Tools for moulding -- Locating rings -- Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D) | ||||
| ISO/IEC 14496-20:2008/Amd 2:2010 | Technology for scene adaptation | ||||
| ISO 16915:2003 | Tools for moulding -- Sprue pullers | ||||
| ISO 16916:2004 | Tools for moulding -- Tool specification sheet for injection moulds | ||||
| ISO 11090-2:2014 | Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 2: Double-column machines (slide-head type) | ||||
| ISO/IEC 9594-6:1990 | Information technology -- Open Systems Interconnection -- The Directory -- Part 6: Selected attribute types | ||||
| ISO 1711-2:2005 | Assembly tools for screws and nuts -- Technical specifications -- Part 2: Machine-operated sockets ("impact") | ||||
| ISO 2351-3:2014 | Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 3: Screwdriver bits for hexagon socket screws | ||||
| ISO 2380:1979 | Screwdriver blades for slotted head screws | ||||
| ISO 2380-1:2004 | Assembly tools for screws and nuts -- Screwdrivers for slotted-head screws -- Part 1: Tips for hand- and machine-operated screwdrivers | ||||
| ISO 2725-2:1996 | Assembly tools for screws and nuts -- Square drive sockets -- Part 2: Machine-operated sockets ("impact") -- Dimensions | ||||
| ISO 1180:1983 | Shanks for pneumatic tools and fitting dimensions of chuck bushings | ||||
| ISO 2787:1984 | Rotary and percussive pneumatic tools -- Performance tests | ||||
| ISO 5393:1994 | Rotary tools for threaded fasteners -- Performance test method | ||||
| ISO 7612:1994 | Diesel engines -- Base-mounted in-line fuel injection pumps -- Mounting dimensions | ||||
| ISO 11148-4:2012 | Hand-held non-electric power tools -- Safety requirements -- Part 4: Non-rotary percussive power tools | ||||
| ISO 11148-5:2011 | Hand-held non-electric power tools -- Safety requirements -- Part 5: Rotary percussive drills | ||||
| ISO 11148-6:2010 | Hand-held non-electric power tools -- Safety requirements -- Part 6: Assembly power tools for threaded fasteners | ||||
| ISO 10245-2:1994 | Cranes -- Limiting and indicating devices -- Part 2: Mobile cranes |
若您对上表中数据有任何疑问，请与网站联系。
