（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 7206-2:1996 | Implants for surgery -- Partial and total hip joint prostheses -- Part 2: Articulating surfaces made of metallic, ceramic and plastics materials | ||||
| ISO 7206-6:2013 | Implants for surgery -- Partial and total hip joint prostheses -- Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components | ||||
| ISO 7207-2:1998 | Implants for surgery -- Components for partial and total knee joint prostheses -- Part 2: Articulating surfaces made of metal, ceramic and plastics materials | ||||
| ISO 7207-2:2011 | Implants for surgery -- Components for partial and total knee joint prostheses -- Part 2: Articulating surfaces made of metal, ceramic and plastics materials | ||||
| ISO 13779-6:2015 | Implants for surgery -- Hydroxyapatite -- Part 6: Powders | ||||
| ISO 14242-1:2014 | Implants for surgery -- Wear of total hip-joint prostheses -- Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test | ||||
| ISO/TS 23810:2012 | Cardiovascular implants and artificial organs -- Checklist for preoperative extracorporeal circulation equipment setup | ||||
| ISO 4708:2015 | Composition cork -- Gasket material -- Test methods | ||||
| ISO 9691:1992 | Rubber -- Recommendations for the workmanship of pipe joint rings -- Description and classification of imperfections | ||||
| ISO/TR 10828:2015 | Worm gears -- Worm profiles and gear mesh geometry | ||||
| ISO 6743-6:1990 | Lubricants, industrial oils and related products (class L) -- Classification -- Part 6: Family C (Gears) | ||||
| ISO 13503-1:2011 | Petroleum and natural gas industries -- Completion fluids and materials -- Part 1: Measurement of viscous properties of completion fluids | ||||
| ISO 26422:2011 | Petroleum and related products -- Determination of shear stability of lubricating oils containing polymers -- Method using a tapered roller bearing | ||||
| ISO 15750-3:2002 | Packaging -- Steel drums -- Part 3: Inserted flange-type closure systems | ||||
| ISO 2229:1973 | Equipment for the petroleum and natural gas industries -- Steel pipe flanges, nominal sizes 1/2 to 24 in -- Metric dimensions | ||||
| ISO 2928:1986 | Rubber hoses and hose assemblies for liquefied petroleum gases (LPG) -- Bulk transfer applications -- Specification | ||||
| ISO/FDIS 11759 | Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) -- Specification | ||||
| ISO 14692-4 | Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation | ||||
| ISO 14692-2:2002/Cor 1:2005 | |||||
| ISO 16380:2014/Amd 1:2016 | |||||
| ISO 16486-1:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 1: General | ||||
| ISO 16486-3:2012/Amd 1:2014 | |||||
| ISO 17885:2015/Amd 1:2016 | |||||
| ISO 2861-2:1980 | Vacuum technology -- Quick release couplings -- Dimensions -- Part 2: Screwed type | ||||
| ISO 21809-5:2010 | Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 5: External concrete coatings | ||||
| ISO 22621-3:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -- Polyamide (PA) -- Part 3: Fittings | ||||
| ISO 27127:2014 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas -- Specification | ||||
| ISO 15783:2002 | Seal-less rotodynamic pumps -- Class II -- Specification | ||||
| ISO 3019-3:1981 | Hydraulic fluid power -- Positive displacement pumps and motors -- Dimensions and identification code for mounting flanges and shaft ends -- Part 3: Polygonal flanges (including circular flanges) | ||||
| ISO 3019-3:1988 | Hydraulic fluid power -- Positive displacement pumps and motors -- Dimensions and identification code for mounting flanges and shaft ends -- Part 3: Polygonal flanges (including circular flanges) | ||||
| ISO 4412-1:1991 | Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps | ||||
| ISO 3529-3:1981 | Vacuum technology -- Vocabulary -- Part 3: Vacuum gauges | ||||
| ISO/TS 3669-2:2007 | Vacuum technology -- Bakable flanges -- Part 2: Dimensions of knife-edge flanges | ||||
| ISO/CD 20146 | Vacuum Technology - Vacuum Gauges - Specification, calibration and expression of uncertainty of calibration results of capacitance diaphragm vacuum gauge with electrical output | ||||
| ISO/CD 21360-3 | Vacuum technology -- Standard methods for measuring pump performance -- Part 3: Specific parameters for mechanical booster pumps | ||||
| ISO 27894:2009 | Vacuum technology -- Vacuum gauges -- Specifications for hot cathode ionization gauges | ||||
| ISO 5136:2003 | Acoustics -- Determination of sound power radiated into a duct by fans and other air-moving devices -- In-duct method | ||||
| ISO 5151:1994 | Non-ducted air conditioners and heat pumps -- Testing and rating for performance | ||||
| ISO 5151:2010 | Non-ducted air conditioners and heat pumps -- Testing and rating for performance | ||||
| ISO 5801:2007/Cor 1:2008 | |||||
| ISO/CD 12759-4 | Fans -- Efficiency classification for fans -- Part 4: Driven fans at maximum operating speed | ||||
| ISO 13253 | Ducted air-conditioners and air-to-air heat pumps -- Testing and rating for performance | ||||
| ISO 13347-2:2004 | Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 2: Reverberant room method | ||||
| ISO 13347-4:2004/Cor 1:2006 | |||||
| ISO 13349:1999 | Industrial fans -- Vocabulary and definitions of categories | ||||
| ISO 13350:1999 | Industrial fans -- Performance testing of jet fans | ||||
| ISO 6584:1981 | Cleaning equipment for air and other gases -- Classification of dust separators | ||||
| ISO/CD 19880-1 | Gaseous hydrogen -- Fuelling stations -- Part 1: General requirements | ||||
| ISO/TS 13399-3:2007 | Cutting tool data representation and exchange -- Part 3: Reference dictionary for tool items | ||||
| ISO 13601:1998 | Technical energy systems -- Structure for analysis -- Energyware supply and demand sectors |
若您对上表中数据有任何疑问，请与网站联系。
