（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 18857-2:2009 | Water quality -- Determination of selected alkylphenols -- Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation | ||||
| ISO/DIS 19340 | Water quality -- Determination of dissolved perchlorate -- Method using ion chromatography (IC) | ||||
| ISO 11504:2012 | Soil quality -- Assessment of impact from soil contaminated with petroleum hydrocarbons | ||||
| ISO 11916-2:2013 | Soil quality -- Determination of selected explosives and related compounds -- Part 2: Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS) | ||||
| ISO 11268-1:1993 | Soil quality -- Effects of pollutants on earthworms (Eisenia fetida) -- Part 1: Determination of acute toxicity using artificial soil substrate | ||||
| ISO 11268-1:2012 | Soil quality -- Effects of pollutants on earthworms -- Part 1: Determination of acute toxicity to Eisenia fetida/Eisenia andrei | ||||
| ISO/NP 16900-14 | Respiratory protective devices -- Methods of test and test equipment -- Part 14: Measurement of sound level | ||||
| ISO/TS 16975-1:2016 | Respiratory protective devices -- Selection, use and maintenance -- Part 1: Establishing and implementing a respiratory protective device programme | ||||
| ISO 3745:2003 | Acoustics -- Determination of sound power levels of noise sources using sound pressure -- Precision methods for anechoic and hemi-anechoic rooms | ||||
| ISO 3746:2010 | Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane | ||||
| ISO 10846-3:2002 | Acoustics and vibration -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements -- Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion | ||||
| ISO 10846-1:1997 | Acoustics and vibration -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements -- Part 1: Principles and guidelines | ||||
| ISO 16730:2008 | Fire safety engineering -- Assessment, verification and validation of calculation methods | ||||
| ISO 16734:2006 | Fire safety engineering -- Requirements governing algebraic equations -- Fire plumes | ||||
| ISO 16737:2006 | Fire safety engineering -- Requirements governing algebraic equations -- Vent flows | ||||
| ISO 19702:2015 | Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy | ||||
| ISO/DIS 19703 | Generation and analysis of toxic gases in fire -- Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires | ||||
| ISO 2901:2016 | ISO metric trapezoidal screw threads -- Basic and design profiles | ||||
| ISO 16312-1:2006 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -- Part 1: Criteria | ||||
| ISO 27368:2008 | Analysis of blood for asphyxiant toxicants -- Carbon monoxide and hydrogen cyanide | ||||
| ISO 2538-1:2014 | Geometrical product specifications (GPS) -- Wedges -- Part 1: Series of angles and slopes | ||||
| ISO/TS 12780-2:2003/Cor 1:2010 | |||||
| ISO/TS 17450-2:2002 | Geometrical product specifications (GPS) -- General concepts -- Part 2: Basic tenets, specifications, operators and uncertainties | ||||
| ISO 10360-7:2011 | Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 7: CMMs equipped with imaging probing systems | ||||
| ISO 12179:2000/Cor 1:2003 | |||||
| ISO 1478:1983 | Tapping screws thread | ||||
| ISO/R 273-2:1968 | Withdrawal of ISO/R 273/2-1968 | ||||
| ISO 14978:2006 | Geometrical product specifications (GPS) -- General concepts and requirements for GPS measuring equipment | ||||
| ISO/TS 16610-32:2009 | Geometrical product specifications (GPS) -- Filtration -- Part 32: Robust profile filters: Spline filters | ||||
| ISO 18391:2016 | Geometrical product specifications (GPS) -- Population specification | ||||
| ISO/FDIS 17450-4 | Geometrical product specifications (GPS) -- Basic concepts -- Part 4: Geometrical characteristics for quantifying GPS deviations | ||||
| ISO 764:1984 | Horology -- Antimagnetic watches | ||||
| ISO 1413:1984 | Horology -- Shock-resistant watches | ||||
| ISO 29466:2008 | Thermal insulating products for building applications -- Determination of thickness | ||||
| ISO/DTR 20491 | Fundamentals of Hydrogen Embrittlement in Steel Fasteners | ||||
| ISO/R 861:1968 | Withdrawal of ISO/R 861-1968 | ||||
| ISO 29469:2008 | Thermal insulating products for building applications -- Determination of compression behaviour | ||||
| ISO 4360:1984 | Liquid flow measurement in open channels by weirs and flumes -- Triangular profile weirs | ||||
| ISO 4375:1979 | Measurement of liquid flow in open channels -- Cableway system for stream gauging | ||||
| ISO 9196:1992 | Liquid flow measurement in open channels -- Flow measurements under ice conditions | ||||
| ISO/DTR 9210 | Measurement of liquid flow in open channels -- Measurement in meandering rivers and in streams with unstable boundaries | ||||
| ISO 6349:1979 | Gas analysis -- Preparation of calibration gas mixtures -- Permeation method | ||||
| ISO 17331:2004/Amd 1:2010 | |||||
| ISO 22029:2003 | Standard file format for spectral data exchange | ||||
| ISO 724:1993/Cor 1:2009 | |||||
| ISO 965-5:1998 | ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing | ||||
| ISO 4017:1999 | Hexagon head screws -- Product grades A and B | ||||
| ISO 7380-1:2011 | Button head screws -- Part 1: Hexagon socket button head screws | ||||
| ISO 7719:1983 | Prevailing torque type all-metal hexagon nuts, style 1 -- Property classes 5, 8 and 10 | ||||
| ISO/DIS 7719 | Prevailing torque (all-metal) hexagon regular nuts -- Product grades A and B |
若您对上表中数据有任何疑问，请与网站联系。
