（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 8194:1987 | Radiation protection -- Clothing for protection against radioactive contamination -- Design, selection, testing and use | ||||
| ISO 11929-2:2000 | Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 2: Fundamentals and application to counting measurements with the influence of sample treatment | ||||
| ISO/CD 16638-2 | Radiological protection -- Monitoring and internal dosimetry for specific materials -- Part 2: Ingestion of uranium compounds | ||||
| ISO/NP 11483 | Nuclear fuel technology -- Preparation of plutonium sources and determination of 238Pu/239Pu isotope ratio by alpha spectrometry | ||||
| ISO 15366:1999 | Nuclear energy -- Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and dilution analysis by solvent chromatography | ||||
| ISO 4148:1988 | Road vehicles -- Special warning lamps -- Dimensions | ||||
| ISO 6508-1:2005 | Metallic materials -- Rockwell hardness test -- Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) | ||||
| ISO/NP 7438 | Metallic materials -- Bend test | ||||
| ISO 7799:1985 | Metallic materials -- Sheet and strip 3 mm thick or less -- Reverse bend test | ||||
| ISO 14556:2000/Amd 1:2006 | Annex D -- Instrumented Charpy V-notch pendulum impact test of sub-size test pieces | ||||
| ISO/FDIS 16630 | Metallic materials -- Sheet and strip -- Hole expanding test | ||||
| ISO 26843:2015 | Metallic materials -- Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces | ||||
| ISO 12707:2016 | Non-destructive testing -- Magnetic particle testing -- Vocabulary | ||||
| ISO 18592:2009 | Resistance welding -- Destructive testing of welds -- Method for the fatigue testing of multi-spot-welded specimens | ||||
| ISO 2395:1990 | Test sieves and test sieving -- Vocabulary | ||||
| ISO 3310-3:1990 | Test sieves -- Technical requirements and testing -- Part 3: Test sieves of electroformed sheets | ||||
| ISO 5832-8:1997 | Implants for surgery -- Metallic materials -- Part 8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy | ||||
| ISO 6474-2:2012 | Implants for surgery -- Ceramic materials -- Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement | ||||
| ISO 8549-4:2014 | Prosthetics and orthotics -- Vocabulary -- Part 4: Terms relating to limb amputation | ||||
| ISO 14602:2010 | Non-active surgical implants -- Implants for osteosynthesis -- Particular requirements | ||||
| ISO/DIS 17327-1 | Non-active surgical implants -- Implant coating -- Part 1: General requirements | ||||
| ISO 25539-1:2017 | Cardiovascular implants -- Endovascular devices -- Part 1: Endovascular prostheses | ||||
| ISO/DTS 13989-2 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 2: Integral temperature method | ||||
| ISO 14104:2014 | Gears -- Surface temper etch inspection after grinding, chemical method | ||||
| ISO 6743-9:2003 | Lubricants, industrial oils and related products (class L) -- Classification -- Part 9: Family X (Greases) | ||||
| ISO 6743-13:2002 | Lubricants, industrial oils and related products (class L) -- Classification -- Part 13: Family G (Slideways) | ||||
| ISO 20848-1:2006 | Packaging -- Plastics drums -- Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l | ||||
| ISO 2929:1975 | Rubber hose for fuel truck delivery | ||||
| ISO 3183-3:1999/Cor 1:2000 | |||||
| ISO 14692-2:2002 | Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture | ||||
| ISO 14723:2009 | Petroleum and natural gas industries -- Pipeline transportation systems -- Subsea pipeline valves | ||||
| ISO/ASME DIS 14414 | Pump system energy assessment | ||||
| ISO/DTR 19688 | Rotodymanic pumps -- Hydraulic performance acceptance test using model pump | ||||
| ISO 6580:1981 | General purpose industrial fans -- Circular flanges -- Dimensions | ||||
| ISO 10302:1996 | Acoustics -- Method for the measurement of airborne noise emitted by small air-moving devices | ||||
| ISO 13347-3:2004/Amd 1:2010 | |||||
| ISO 10294-1:1996/Amd 1:2014 | |||||
| ISO 10294-2:1999 | Fire resistance tests -- Fire dampers for air distribution systems -- Part 2: Classification, criteria and field of application of test results | ||||
| ISO 29463-2:2011 | High-efficiency filters and filter media for removing particles in air -- Part 2: Aerosol production, measuring equipment and particle-counting statistics | ||||
| ISO 10442:2002 | Petroleum, chemical and gas service industries -- Packaged, integrally geared centrifugal air compressors | ||||
| ISO/DTR 12942 | Compressors -- Classification -- Complementary information to ISO 5390 | ||||
| ISO/CD 14687 | Hydrogen fuel -- Product specification | ||||
| ISO/TS 13399-3:2007/Cor 1:2011 | |||||
| ISO/TS 13399-60:2007/Cor 1:2011 | |||||
| ISO 2107:2007 | Aluminium and aluminium alloys -- Wrought products -- Temper designations | ||||
| ISO 4885:1996 | Ferrous products -- Heat treatments -- Vocabulary | ||||
| ISO 12944-5:1998 | Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective paint systems | ||||
| ISO/CD 11844-2 | Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 2: Determination of corrosion attack in indoor atmospheres | ||||
| ISO 9001:1987 | Quality systems -- Model for quality assurance in design/development, production, installation and servicing | ||||
| ISO/TR 9165:1988 | Practical thermal properties of building materials and products |
若您对上表中数据有任何疑问，请与网站联系。
