（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 18172-2:2007 | Gas cylinders -- Refillable welded stainless steel cylinders -- Part 2: Test pressure greater than 6 MPa | ||||
| ISO 19078:2006 | Gas cylinders -- Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles | ||||
| ISO 21007-2:2013 | Gas cylinders -- Identification and marking using radio frequency identification technology -- Part 2: Numbering schemes for radio frequency identification | ||||
| ISO 21172-1:2015/CD Amd 1 | |||||
| ISO 24431:2006 | Gas cylinders -- Cylinders for compressed and liquefied gases (excluding acetylene) -- Inspection at time of filling | ||||
| ISO 6708:1995 | Pipework components -- Definition and selection of DN (nominal size) | ||||
| ISO 7268:1983/Amd 1:1984 | |||||
| ISO/DATA 6:1974 | Title missing | ||||
| ISO 4516:1980 | Metallic and related coatings -- Vickers and Knoop microhardness tests | ||||
| ISO/TR 10465-1:1993 | Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes -- Part 1: Installation procedures | ||||
| ISO 9356:1989 | Polyolefin pipe assemblies with or without jointed fittings -- Resistance to internal pressure -- Test method | ||||
| ISO 10804-1:1996 | Restrained joint systems for ductile iron pipelines -- Part 1: Design rules and type testing | ||||
| ISO 10931:2005 | Plastics piping systems for industrial applications -- Poly(vinylidene fluoride) (PVDF) -- Specifications for components and the system | ||||
| ISO 10931-1:1997 | Plastics piping systems for industrial applications -- Poly(vinylidene fluoride) (PVDF) -- Part 1: General | ||||
| ISO 15493:2003 | Plastics piping systems for industrial applications -- Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) -- Specifications for components and the system -- Metric series | ||||
| ISO 65:1981 | Carbon steel tubes suitable for screwing in accordance with ISO 7-1 | ||||
| ISO 2604-3:1975 | Steel products for pressure purposes -- Quality requirements -- Part 3: Electric resistance and induction-welded tubes | ||||
| ISO 6259-3:1997 | Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes | ||||
| ISO/DIS 6964 | Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method | ||||
| ISO 13950:2007/Cor 1:2008 | |||||
| ISO 264:1976/Add 1:1982 | Diameters 200 mm and 225 mm | ||||
| ISO/TS 19911:2010 | Plastics pipes and fittings -- Format of a technical file for characterizing PE spigot end fittings | ||||
| ISO 2398:1987 | Industrial rubber hose for compressed air (up to 2,5 MPa) | ||||
| ISO 8449:1986 | Pipework -- Single overlap flexible metal hoses (asbestos packing, limited tightness, circular or polygonal section, in protected carbon steel) | ||||
| ISO 5209:1977 | General purpose industrial valves -- Marking | ||||
| ISO 15848-1:2015/Amd 1:2017 | |||||
| ISO 6002:1992 | Bolted bonnet steel gate valves | ||||
| ISO 10100:2001 | Hydraulic fluid power -- Cylinders -- Acceptance tests | ||||
| ISO 10762:1997 | Hydraulic fluid power -- Cylinder mounting dimensions -- 10 MPa (100 bar) series | ||||
| ISO 10100:2001/Amd 1:2012 | |||||
| ISO 4400:1980 | Fluid power systems and components -- Three-pin electrical plug connector -- Characteristics and requirements | ||||
| ISO 14258:1998 | Industrial automation systems -- Concepts and rules for enterprise models | ||||
| ISO 15704:2000/Amd 1:2005 | Additional views for user concerns | ||||
| ISO 2539:1974 | Withdrawal of ISO 2539-1974 | ||||
| ISO/TR 6132:1981 | Numerical control of machines -- Operational command and data format | ||||
| ISO 9409-1:1996/Cor 1:1998 | |||||
| ISO 9946:1999 | Manipulating industrial robots -- Presentation of characteristics | ||||
| ISO/CD 18646-2 | Robotics -- Performance criteria and related test methods for service robots -- Part 2: Navigation | ||||
| ISO 15187:2000 | Manipulating industrial robots -- Graphical user interfaces for programming and operation of robots (GUI-R) | ||||
| ISO/CD TR 23482-2 | Robotics -- Application of ISO 13482 -- Part 2: Application guide | ||||
| ISO 299:1973 | Machine tool tables -- T-slots and corresponding bolts | ||||
| ISO 10889-2:2004 | Tool holders with cylindrical shank -- Part 2: Type A, shanks for tool holders of special designs | ||||
| ISO 10889-6:2004 | Tool holders with cylindrical shank -- Part 6: Type E with cylindrical seat | ||||
| ISO 3408:1975 | Ball screws -- Nominal diameters and basic leads -- Metric and inch series | ||||
| ISO 230-7:2015 | Test code for machine tools -- Part 7: Geometric accuracy of axes of rotation | ||||
| ISO 230-7:2006 | Test code for machine tools -- Part 7: Geometric accuracy of axes of rotation | ||||
| ISO/TR 230-9:2005 | Test code for machine tools -- Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations | ||||
| ISO 230-10:2011/Amd 1:2014 | Measuring performance with scanning probes | ||||
| ISO 10303-42:1994/Cor 1:1999 | |||||
| ISO 10303-42:1994/Cor 3:2001 |
若您对上表中数据有任何疑问，请与网站联系。
