（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 8322-10:1995 | Building construction -- Measuring instruments -- Procedures for determining accuracy in use -- Part 10: Difference between non-glass reflectors and electronic distance-measuring prisms (traditional glass prisms) for distances up to 150 m | ||||
| ISO/DIS 19711-1 | Building construction machinery and equipment -- Mobile mixers -- Part 1: Terminology and commercial specifications | ||||
| ISO 4422-1:1996 | Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 1: General | ||||
| ISO 6600:1980 | Ductile iron pipes -- Centrifugal cement mortar lining -- Composition controls of freshly applied mortar | ||||
| ISO 21004:2006 | Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply | ||||
| ISO 975:2000 | Brown coals and lignites -- Determination of yield of benzene-soluble extract -- Semi-automatic method | ||||
| ISO 5667-15:1999 | Water quality -- Sampling -- Part 15: Guidance on preservation and handling of sludge and sediment samples | ||||
| ISO/NP 16075-3 | Guidelines for treated wastewater use for irrigation projects -- Part 3: Components of a reuse project for irrigation | ||||
| ISO 24512:2007 | Activities relating to drinking water and wastewater services -- Guidelines for the management of drinking water utilities and for the assessment of drinking water services | ||||
| ISO 3822-2:1984 | Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps | ||||
| ISO 3822-3:1984 | Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 3: Mounting and operating conditions for in-line valves and appliances | ||||
| ISO 3822-1:1999/Amd 1:2008 | Measurement uncertainty | ||||
| ISO 3822-4:1997 | Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 4: Mounting and operating conditions for special appliances | ||||
| ISO 1015:1975 | Brown coals and lignites -- Determination of moisture content -- Direct volumetric method | ||||
| ISO 1015:1992 | Brown coals and lignites -- Determination of moisture content -- Direct volumetric method | ||||
| ISO 4633:2002 | Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials | ||||
| ISO 4633:2015 | Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials | ||||
| ISO 13056:2011 | Plastics piping systems -- Pressure systems for hot and cold water -- Test method for leaktightness under vacuum | ||||
| ISO 13845:2000 | Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection | ||||
| ISO 15874-1:2013 | Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General | ||||
| ISO 15876-1:2003 | Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 1: General | ||||
| ISO 4672:1978 | Rubber products -- Hoses -- Low-temperature flexibility tests | ||||
| ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 7: Guidance for the assessment of conformity | ||||
| ISO/FDIS 11297-2 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 2: Lining with continuous pipes | ||||
| ISO/TS 17902:2016 | Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers | ||||
| ISO 21138-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A | ||||
| ISO/CD 21138-2 | Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A | ||||
| ISO 5667-13:2011 | Water quality -- Sampling -- Part 13: Guidance on sampling of sludges | ||||
| ISO 24510:2007 | Activities relating to drinking water and wastewater services -- Guidelines for the assessment and for the improvement of the service to users | ||||
| ISO 24523:2017 | Service activities relating to drinking water supply systems and wastewater systems -- Guidelines for benchmarking of water utilities | ||||
| ISO/CD 20220 | Elastomeric bridge bearings - Specification and design | ||||
| ISO 22762-2:2005 | Elastomeric seismic-protection isolators -- Part 2: Applications for bridges -- Specifications | ||||
| ISO 392:1986 | Asbestos-cement pipe fittings for building and sanitary purposes | ||||
| ISO/TS 7024:2005 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Thermoplastics -- Recommended practice for installation | ||||
| ISO/TR 7024:1985 | Above-ground drainage -- Recommended practice and techniques for the installation of unplasticized polyvinyl chloride (PVC-U) sanitary pipework for above-ground systems inside buildings | ||||
| ISO 7675:1991 | Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings -- Specifications | ||||
| ISO 8283-1:1991 | Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) | ||||
| ISO 7682:2003 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Acrylonitrile-butadiene-styrene (ABS) | ||||
| ISO 17201-5:2010 | Acoustics -- Noise from shooting ranges -- Part 5: Noise management | ||||
| ISO/IEC Guide 74:2004 | Graphical symbols -- Technical guidelines for the consideration of consumers' needs | ||||
| ISO 21101:2014 | Adventure tourism -- Safety management systems -- Requirements | ||||
| ISO 24801-3:2007 | Recreational diving services -- Safety related minimum requirements for the training of recreational scuba divers -- Part 3: Level 3 -- Dive leader | ||||
| ISO 24802-1:2014 | Recreational diving services -- Requirements for the training of scuba instructors -- Part 1: Level 1 | ||||
| ISO 5127-11:1987 | Documentation and information -- Vocabulary -- Part 11: Audio-visual documents | ||||
| ISO 5843-3:1997 | Aerospace -- List of equivalent terms -- Part 3: Aerospace bolts and nuts | ||||
| ISO 1837:2003 | Lifting hooks -- Nomenclature | ||||
| ISO 2148:1974 | Continuous handling equipment -- Nomenclature | ||||
| ISO 16682:2015 | Aerospace series -- Terminology for clamping devices | ||||
| ISO 1025:1981 | Textile machinery and accessories -- Sectional beams for warp knitting machines -- Terminology and main dimensions | ||||
| ISO 1968:1973 | Ropes and cordage -- Vocabulary |
若您对上表中数据有任何疑问，请与网站联系。
