（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 239:1999 | Drill chuck tapers | ||||
| ISO 494:1975 | Parallel shank twist drills -- Long series | ||||
| ISO 494:2009 | Cylindrical shank twist drills -- Long series | ||||
| ISO 866:2016 | Centre drills for centre holes without protecting chamfers -- Type A | ||||
| ISO 2238:2011 | Machine bridge reamers | ||||
| ISO 3292:1995 | Extra-long parallel shank twist drills | ||||
| ISO 3293:2016 | Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive | ||||
| ISO 3294:2016 | Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive | ||||
| ISO 3293:1975 | Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive | ||||
| ISO 3466:1975 | Machine taper pin reamers with parallel shanks | ||||
| ISO 6103:1999 | Bonded abrasive products -- Permissible unbalances of grinding wheels as delivered -- Testing | ||||
| ISO 3466:2016 | Machine taper pin reamers with parallel shanks | ||||
| ISO 4204:2016 | Countersinks, 90°, with Morse taper shanks and detachable pilots | ||||
| ISO 3467:2016 | Machine taper pin reamers with Morse taper shanks | ||||
| ISO 4205:2016 | Countersinks, 90°, with parallel shanks and solid pilots | ||||
| ISO 5468:1992 | Rotary and rotary impact masonry drill bits with hardmetal tips -- Dimensions | ||||
| ISO 4875-2:1978 | Metal cutting band saw blades -- Part 2: Basic dimensions and tolerances | ||||
| ISO 4875-2:2006 | Metal-cutting band saw blades -- Part 2: Characteristics and dimensions | ||||
| ISO 4875-3:1978 | Metal cutting band saw blades -- Part 3: Characteristics relating to each type of blade | ||||
| ISO 2336-2:2006 | Hacksaw blades -- Part 2: Dimensions for machine blades | ||||
| ISO 234-2:1982 | Files and rasps -- Part 2: Characteristics of cut | ||||
| ISO 2283:1972 | Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in | ||||
| ISO 4230:2016 | Hand- and machine-operated circular screwing dies for taper pipe threads -- R series | ||||
| ISO 8051:2016 | Long shank taps with nominal diameters from M3 to M10 -- Full-diameter shank taps with recess | ||||
| ISO 3017:1981 | Abrasive discs -- Designation, dimensions and tolerances -- Selection of disc outside diameter/centre hole diameter combinations | ||||
| ISO 666:2012 | Machine tools -- Mounting of grinding wheels by means of hub flanges | ||||
| ISO 5429:1977 | Coated abrasives -- Flap wheels with incorporated flanges or separate flanges -- Designation and dimensions | ||||
| ISO 5429:2012 | Coated abrasives -- Flap wheels with incorporated flanges or separate flanges | ||||
| ISO 5429:2005 | Coated abrasives -- Flap wheels with incorporated flanges or separate flanges | ||||
| ISO 6104:2005 | Superabrasive products -- Rotating grinding tools with diamond or cubic boron nitride -- General survey, designation and multilingual nomenclature | ||||
| ISO 21948:2001 | Coated abrasives -- Plain sheets | ||||
| ISO 21949:2001 | Coated abrasives -- Plain sheets with holes for dust extraction | ||||
| ISO 21950:2001 | Coated abrasives -- Plain discs | ||||
| ISO 22917:2004 | Superabrasives -- Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride | ||||
| ISO 6753-1:2005 | Tools for pressing and moulding -- Machined plates -- Part 1: Machined plates for press tools | ||||
| ISO 6753:1982 | Machined plates for press tools, moulds, jigs and fixtures -- Nominal dimensions | ||||
| ISO 6898:1984 | Open front mechanical power presses -- Capacity ratings and dimensions | ||||
| ISO 9448-3:1991 | Tools for pressing -- Guide bushes -- Part 3: Form B, ball cage bushes, plain, type 1 | ||||
| ISO 9448-4:1991 | Tools for pressing -- Guide bushes -- Part 4: Form C, gliding bushes, headed, type 1 | ||||
| ISO 9448-5:2013 | Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1 | ||||
| ISO 10242-3:1991 | Tools for pressing -- Punch holder shanks -- Part 3: Type D | ||||
| ISO 11901-2:2004 | Tools for pressing -- Gas springs -- Part 2: Specification of accessories | ||||
| ISO 11901-1:2003 | Tools for pressing -- Gas springs -- Part 1: General specifications | ||||
| ISO 18084:2005 | Press tools for tablets -- Punches and dies | ||||
| ISO/CD 20929 | Tools for pressing -- Heel guidings in large stamping and forming dies | ||||
| ISO/CD 20928 | Tools for pressing -- Spring plungers with helical compression steel spring or nitrogen gas spring | ||||
| ISO 23480:2008 | Tools for pressing -- Sliding plates | ||||
| ISO 23481:2008 | Tools for pressing -- Cam driver plates | ||||
| ISO 1711-2:2015 | Assembly tools for screws and nuts -- Technical specifications -- Part 2: Machine-operated sockets (impact) | ||||
| ISO 11148-6:2012 | Hand-held non-electric power tools -- Safety requirements -- Part 6: Assembly power tools for threaded fasteners |
若您对上表中数据有任何疑问，请与网站联系。
